What did you use your Leatherman for today?
-
Surge, cut a wire. Assembled a bike rack. Scissors cut all sort of things. Blade for unpacking boxes.


-
Last Saturday while hiking Guadalupe Peak, I used the Micra scissors to trim some toenails. It was well up to the task.
[attach id=0 msg=2500954]

-
Wingman helped patch up a hole in a no-longer-waterproof boot. Might work. Didn't cost anything to try. Best wishes. G
[attach id=0 msg=2501072]
-
As expensive as new boots can be, you'll really come out ahead if the patch job holds. Now, where is that "fingers crossed" smiley?
-
I didn't know there was a fingers crossed smiley. I'm not all that current on my smilological representations. I got a boot full of water yesterday from crossing a little creek. Got to follow the old mantra. "Use it up, wear it out, make it do, or do without." Within reason, of course. That was latex caulk for repair work. It seems to stick to the rubbery sole very well. Best wishes. G
-
I know there's a fingers crossed smiley somewhere. It's where exactly that's puzzling me. Latex caulk may well do the job. And if it was left over from another job, you had nothing to lose by trying!
-
Oh man, it's been a while, but recently I pulled my Wave out of the drawer and realised that I really missed this tool
.So I went straight to using it quite extensively 😀.
A few weeks ago I stumbled upon a tremolo guitar effect pedal from Seymour Duncan I wanted to buy like 20 years ago but somehow didn't. The price was good so I pulled the trigger. Put it into my pedalboard and realised that now I have two tap tempo pedals and have to tap both to set the proper tempo for each song. That's suboptimal to say the least, so I drilled a hole in this new pedal and soldered a wire to the jack output so now the tap tempo switch on my new tremolo also sets the tempo for the delay effect or any other effects I may daisy chain in the future. Turned out really well. Wave was used for wire stripping both with the new Plus pliers I have bought and installed recently as well as a dedicated tool. Stripping with pliers works much better than on a Spirit X - one thing Wave does indeed do better 😃.
Pics are below:
Spoiler:
[attach id=0 msg=2501195]
[attach id=1 msg=2501195]
[attach id=2 msg=2501195]
[attach id=3 msg=2501195]



-
But of course that was just the beginning :)
Also I finally installed lights at the balcony - there was some weird setup with electrics in place so it took some experimenting in order to make it work, but all done ✅. Main blade on a Wave was used for stripping the stupidly fragile aluminium wires and bit extender for attaching the lamp to those wires.
[attach id=0 msg=2501196]And while at it laundry hanging mechanism failed again:
[attach id=1 msg=2501196]So I drilled holes in the poles and fastened all of them with a zip tie - this way surely it'll last quite a few more years. Wave pliers were used for tightening and trimming the excess of the zip ties.
[attach id=2 msg=2501196]


-
Overall after having not used a Wave for a while at some point yesterday a thought came to my mind. I have decades of experience using different computers and operating systems and different approaches by different companies. That's why at some point yesterday I realised that Swiss Tool, Spirit and Victorinox overall is like a Mac or other Apple products.
While Wave and other LMs are definitely Linux to me.
No good or bad there - love and use both tools and platforms - each has its benefits. But that's 101% how I feel about it :) What do you think?
-
Good to see you back. What multi-tool is like Microsoft Windows? Best wishes. Gary

-
@IMR4198 said:
Good to see you back. What multi-tool is like Microsoft Windows? Best wishes. Gary

Thanks a lot, good to be back :) No idea as for Windows - don't use it much :).
But as for LMs - I had to install an S30V blade, Plus pliers that I had to heat and loosen for a while, will install an awl later and only then Wave will become close to what I want it to be. Similar to Linux. Anything is possible but it takes time, effort, knowledge and persistence :)
On Vic multitools for me (!) it's much closer to perfection as is. Spirit not so much but on a Swiss Tool it really is. But you can't really change much if you want to - really reminds me about Apple platforms - only in some ways but still.
-
@ThisAlarm7 said:
Well, since I despise Windows I'd have to say the equivalent would be one of those cheap crappy knock offs that will break right away. :DWell I definitely don't hate Windows - there are apps that only exist on Windows that I use - for example an app for a thermal camera and a lab power supply - and those won't sadly work under virtual machines on a Mac or Linux. Not to mention games... So definitely no hate here - none of those platforms is bad - otherwise they won't even exist or would cease to exist IMO. So no good, bad, right or wrong answers here :)
It's just a subjective feeling, you know.
-
Well you guys can tell I missed my Wave 🤣.
Our reverse osmosis tap started leaking a little recently. It's a rather old tap that has a rather old design. So I wanted to replace it with a more modern version, but sadly it was out of stock in the local stores. But today I stumbled upon one right next to where we live, so bought and installed it right away. Wave pliers did a surprisingly great job at cutting a plastic fitting

[attach id=0 msg=2501232]
[attach id=1 msg=2501232]
[attach id=2 msg=2501232]



-
Good stuff!

-
Thanks, Farmer X

As for the good stuff - today I guess I finally made me a Wave I really like. First I put onto this Linux system an S30V blade years ago. And had a 154CM before that. Then a few days ago I put a Wave Plus plier head. Too bad I missed a chance to have one with 154CM cutters and not those doubtful 420HC, but what can you do.
And today I finally managed to get a Rebar awl in there. Took quite a bit of time and effort filing plier support, scissors support, awl thumb stud and so on, but seems to be well worth it - now that's a Wave I always wanted

P.S.: one thing to add would be a LM ratchet of course, but that seems to be a surprisingly rare treasure for some unclear reason :)
[attach id=0 msg=2501417]

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
