What tool did you carry today?
-
@Antti Lammi said:
Awesome carry SteveThanks pal !

-
[attach id=0 msg=2501264]

-
Today with Ranger & PST2

Only Tools Matters
-
Boker Mini Tech-Tool 4 in Zebrawood. I forget what a great little blade this has. Useable scissors and handy sized screwdriver.

-
@Gareth said:
Boker Mini Tech-Tool 4 in Zebrawood. I forget what a great little blade this has. Useable scissors and handy sized screwdriver.That's a great little toolset!
I'm carrying this Huntsman Lite that I recently saved from neglect and abandonment. It took a while to clean all the gunk off and sharpen the blades back up! Now I only need new batteries for the flashlight and it'll be close to new!


-
My usual carry here. [attach id=0 msg=2501509] I alternate between the sad SAK and the Gerber, depending on whether I'm going out (SAK for pocket convenience) or puttering around the house, when I generally use the Gerber with its more useful pliers and phillips driver. The "Nite IZE" tool on the car keys comes in handy from time to time, in part because it's TSA legal, so when traveling I can at least manage to open a bag of chips. The watch is also handy for traveling and shop work, because beyond keeping good time it's worth nothing.

-
@customod said:
That's a great little toolset!I'm carrying this Huntsman Lite that I recently saved from neglect and abandonment. It took a while to clean all the gunk off and sharpen the blades back up! Now I only need new batteries for the flashlight and it'll be close to new!

A SAK well worth saving! Sadly I've never had a 91mm Lite in my collection. I always liked the idea of the Mountaineer Lite myself.
-
@bruto said:
My usual carry here. [attach id=0 msg=2501509] I alternate between the sad SAK and the Gerber, depending on whether I'm going out (SAK for pocket convenience) or puttering around the house, when I generally use the Gerber with its more useful pliers and phillips driver. The "Nite IZE" tool on the car keys comes in handy from time to time, in part because it's TSA legal, so when traveling I can at least manage to open a bag of chips. The watch is also handy for traveling and shop work, because beyond keeping good time it's worth nothing.The MP400 is a great MT.

-
Old school ! 8)
-
A little color coordination going on this evening.
[attach id=0 msg=2501630]
-
What watch is that? -
Loving the variety of all these very nice carries! I've been on another spree of trying to rescue beat up 2nd hand tools. Today's specimen is a Fuse... Not sure what happened to the tips of the plier head. Looked like it had seen some pretty hot action!I have a spare Blast plier head in the parts bin that should fit this perfectly but first I wanted to experiment. I cut off the needle nose for blunt pliers more suited for torque and added some 90° deep grooves for some bite when twisting. I will test this for some time before deciding what to do next.
Also I used the stuff a bit that lives in /on my wallet (and keytool) today.



-
@customod said:
Loving the variety of all these very nice carries! I've been on another spree of trying to rescue beat up 2nd hand tools. Today's specimen is a Fuse... Not sure what happened to the tips of the plier head. Looked like it had seen some pretty hot action!I have a spare Blast plier head in the parts bin that should fit this perfectly but first I wanted to experiment. I cut off the needle nose for blunt pliers more suited for torque and added some 90° deep grooves for some bite when twisting. I will test this for some time before deciding what to do next.
Also I used the stuff a bit that lives in /on my wallet (and keytool) today.
Nice job !

-
These today

-
@G-Dizzle: no hurry. I recently found a Citizen automatic on eBay, but I hadn't yet sorted out mail delivery, and therefore wasn't too willing to risk international shipping.
@customod: nice job! I have a Kick that received a blunt-nose pliers mod. If I'm able to find a replacement pliers head and the necessary wrenches, I'll change it and swap if needed.
@SteveC: you always have a great carry to share!

-
HF's HM Embody Repair
I have a couple of these Herman Miller Embody chairs. Luxury for me so I can sit in my different study / offices all the same. Both have failed in the upper rear "spine" attachment. Nothing like consistent failed polymer design. Anyway, when one failed I got the warranty repair gentleman to cough up two other mounts for the next date. Yeah, my other chair is white. Living with the colour mismatch in this case is not a problem.

The attachment parts are held in by a couple of self tapping T25 head fastener screws. After removing the screws with my old faithful modded Leatherman Charge TTi there's a bit of gigging around to remove and fit the new pivot mount fasteners but essentially it's a shelling peanuts level of difficulty especially second time around.

-
Thanks guys! Nice carr Steve and Heywood. That minichamp is a looker! /sigh for all those poorly designed plastic parts in the world...
I went ahead and modded the bluntnose Fuse a bit more. I changed the cross driver for a bit exchanger and added the file from a blast.
I also tested my awl/reamer long bit in the new exchanger and it almost closes all the way with it in place. Interesting at least as a test.



Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login