Roxon Flex.
-
@David Bowen said:
@Grand_Banana here is my review of the Flex: https://multitool.org/tools/roxon-flex-reviewI hadn't used it hard, no harder than any of my other multitools. Maybe Roxon needs you to put one under a stress test [emoji6]
Also Roxon has a companion tool coming out soon. I'll have a review of it up in the next little bit.
Sent from my SM-G996U using Tapatalk
Thanks for linking. What do you think about the lock mechanism or the slots on the tools for exchanging as points of failure?
I’ll give you some examples: I’ve been back and forth between a modded Wave+ (added 3D phillips and awl) and Spirit on harder use. I can torque the heck out of them both on a Phillips head and it’s clear when I’m staining the limits of the pivot. The pry bar on the Spirit has withstood more than the Leatherman equivalent tool, but both could fail with fairly little force. I can also use a small mallet with the Spirit chisel to aggressively remove hard wood. I had to really bang on it the other day and the Spirit is no worse for wear.
If only they would send me one to stress test. Ive got a ton of projects over this next yearthat could really put it through its paces. Both the Flex and Companion.
It doesn’t appear the companion has a tweezer and toothpick. It’s unfortunate they don’t include those implements. It’s one of the primary reasons I carry a cellidor SAK I use them all the time!
-
I wonder: I did read that the Phillips Screwdriver that came whit the tool also can get used to get combinied whit the Bitholder from the ROXON Bit Set, so I don’t have to use the Bitholder tool that will come whit the Saw ?
Is the Blade One Handed ? When I’m go to a place where blades are not allowed, I will use one of the spacers..
Gesendet von iPad mit Tapatalk Pro
-
Did not receive the Flex today sadly : I let my packets deliver to a German post Packet Station, and they get filled usually in the afternoon so in my long workdays I can pick it up just fine but on my short workdays I’m just too early..
But I have now the ROXON Bitset: seems like they are about the same size as the Victorinox Bits that came in whit the Cybertool or the Swisschamp XLT, but they are not the „Standart Bit Socket“ you would find in every DIY Market..
Well it’s an Pocket Multitool, so its doesn’t need Heavy Duty Bits..
So at Amazon you only get Tool Packages whit 3 Tools, and seems like not every tool..
Is there a place where to order Tools if needed ?
Gesendet von iPad mit Tapatalk Pro
-
Just posted my initial impressions on the Flex Companion. I'll make a video soon and a full written review as well.
/topic/93187
Sent from my SM-G996U using Tapatalk
-
Got my Flex this Morning from the DHL Packstation, had allready the chance for an quick unboxing and play around:
Nice: The Long Tools are not Opened One Handed, this means no issues whit German Knive Law 42a, but they are still easy to open even whit gloves ..
Not that Nice: The Roxon Bit Kit contains much smaller Bit Sockets, so i can drive them whit the Phillips Adapter and the Phillips Screwdriver that is allready in the Out of the Box Toolset, but the Special Bit Driver needs the bigger bits, its no big issue as i can take them whit me tomorrow, ..
But this means when i alco carry this BitDriver i could use normal Bits you also use in an Toolbox ..So for now i did not change anything in the Toolset, expect that i did swap the Blade and the Sciccors , also did change the Position of the Bottle Opener to the Outside, so i have an One Hand Bottle Opener ^^
The Tool came whit lots of Spacers, while i would maybe use one when i plan to go Bladeless,
Ditnt test the Tools themself, i would guess that the Bottle Opener and the Can Opener should work, beside the DIY Tool Feature its an normal Multitool..
I had to get used to this Lock System first, but after that its quite easy, , and this Second Lock under the Locking Nubs is also nice: this way the Blade is Double Secured when you use it, or everything cant get open by Accident ^^
Will bring it today in use..
-
The Flex is a game changed.
-
@matzesu said:
Got my Flex this Morning from the DHL PackstationWill bring it today in use..
DHL doesn’t seem to be good anywhere huh. I worked in a packaging plate years ago and DHL was a four letter word. I haven’t used them in probably 15 years.
I’m interested to hear your experience. What do you do for work? I keep thinking this is the one for me. Can it beat the Vic Spirit!
-
Well, usually DHL Works quite good for me: i did a few Months ago change my Amazon Delievery to the PacketStation as its much more easy for me: I can pick it up when im on my Way home, i dont have to be at home the whole time, etc, it did work bevor quite good, but this week was this Server Issue at DHL..
I’m Work on an BeeCeeper Suply Store: We have anything from Hivetools until Hives, and also Cosmetics whit Stuff from Bees (Propolis, Honey etc) , ..
My Pocketknives are mostly for myself pleasure, some times i use them for stuff which needs to do on the shop, ..
I have an Unimog at Home where whe some Days in the Year went to an Unimog Convention, so an Camping Toolset is also usefull ..
Also be a BeeCeeper myself..
Gesendet von iPad mit Tapatalk Pro
-
Love auto correct. I meant that the Flex is a game changer.
-
So I did decide now how to deal whit the Bit Driver; the Bitdriver for the big bits rattles quite noisy, so this will get used when I need it: I allready did put 3 tools on one side that are not that useful so can get changes for the Bit Driver ..
until I need the normal size bits, I have the small bits from ROXON which can go on the Phillips ..
I’m still wonder why this Bitdriver needs 4 slots, might be it was from the companion where the blade is a bit different ..The companion where no alternative for me as it’s got an One Hand Blade
Gesendet von iPad mit Tapatalk Pro
-
So too be save, i did exchange the Blade now whit the Saw (even though it might make much more mean injurys (did saw me a few years ago in my Fingers whit an Woodsaw (dont worry they are still at the place they have to be) ..
The Blade on an Multitool is inpraktical anyway, its not that good to hold for precize Cutting, you have to unfold every tool on this side to clean it, so better to have an Dedicated Knive ..And i did find out the Small Bit Set from Roxon fits perfectly in an Madcatz Gameboy Advance SP Game Cardridge Case ^^ (they are in fakt usefull for lots of stuff, also for Carry 2 to 3 AAA Batteries, or for Guitar Pics) ..
When i open the Pliers its feels a bit strange, but might be this is because there are Springs ..

-
I've got our review of the new Companion over in our review section. At the bottom is a link for 15% of your order.
/topic/93209
Sent from my SM-G996U using Tapatalk
-
So i did test the Mainblade on the ROXON Flex Multitool Today, seems like i could keep it the whole time away from the Multitool: its not that Sharp as i did expect ..
on the Odenwolf Mini, my Tiny Fixed Knive you could cut yourself by just look at it but on the Flex, its had its issues to cut through the Bagel (Breadroll)..Gesendet von iPad mit Tapatalk Pro
-
I had to take a sudden day trip across the country last night and was only able to bring a carry-on, so I figured I'd test a bladeless configuration of the Flex and see if TSA gave me any guff about it. I was stopped both coming and going for agents to examine the tool, but with all the attachments spread out before putting it on the conveyor, they just picked it up and did a cursory check to make sure there wasn't a blade still folded up inside the body and then waved it through with no trouble. I think this will be my new carry tool for future air travel.
Worth noting: one of the agents did ask me if the tool had a serrated saw on it when he saw me pulling it out to put in the bin. I wasn't aware those were considered knife blades, but apparently they are. Glad I picked the file instead.
[attach id=0 msg=2503989]

-
It made it through? That's awesome!

-
Im a bit dissapointed about my Tool Decissions: My Plan was to use the Flex for everything, from Skizzoring to Cutting, and also for Opening Bottles etc, but now i have it whit only the Stuff that is not on my ALOX Pioneer, and are using the Pioneer as Knive again..
The Blade on the Flex is actually not bad, but its not usefull for cutting Breadrolls..
Might be i will change this again this evening, as i dont have any Flex Tools today whit me , only them on the Multitool itself..
-
Good to read about your experiences matzesu and Cypren.
matzesu I was wondering if I’d end up trying too hard to avoid overlap. I would try to copy my Spirit toolset first. Whats your experience using the tools?
Cypren you deserve an award for bravery letting it up to TSA. They are inconsistent between airports. Same question for you: Whats your experience using the tools? Do you have a Spirit to compare the chisels and wire strippers?
-
Well, i could again get back my Toolset from last week: An Tiny Fixed Knive for the Sharp Blade if needed, and otherwise the Flex..
I did use lately the Big Bit Screwdriver for tuning the Holders of our Kitchen Drawers, worked quite good, but i got also an Issue: Some times, and i think its have something to do whit the Screwdriver, the Mechanic gets Stuck, so you have to wiggle around quite some bit too get it back running..
So i would say i will try to get it back to the Stock Toolset for EveryDay, and i can carry the tools i need some times in my Backpack
And the Saw as well as an Placeholder in another Pocket, this way i could "Unarm" the Tool if needed..
-
@Grand_Banana said:
Cypren you deserve an award for bravery letting it up to TSA. They are inconsistent between airports. Same question for you: Whats your experience using the tools? Do you have a Spirit to compare the chisels and wire strippers?I read the policies very carefully before deciding what implements to install, but one reason I wasn't too worried was that I figured that if TSA had a problem with a tool (my largest worries were the chisel and the scissors, since both of them could potentially be used as a slashing or stabbing weapon), I could likely just remove that tool and hand it over to them. Most agents aren't smurfholes as long as you're polite and understand they're just trying to do their job and comply with a set of very burdensome bureaucratic rules.
Overall I would say that I have a middling impression of the Flex. The build quality is nowhere near on the level of a Leatherman or Victorinox tool: cheap steel, poorly sharpened implements out of the box, and the opening mechanism is just plain bad, almost always requiring two hands to get the long blade tools out of the body. Additionally, I'm not sure if it's universal, but the main pliers on mine have a lot of lateral flex: the handles bend out of alignment with very little pressure (see picture), a flaw it shares with other cheap Chinese-made tools that I own like the BIBURY clones, but not any of my actual Leatherman tools.
With all of that said, the modularity is unique and I don't have any other multitools of this type that could make it through a TSA checkpoint, so it still has quite a bit of value beyond the curiosity factor. And one thing I really like about Roxon is the speed with which they're innovating: this is not anywhere near their first attempt at nailing a modular multitool design, and with each iteration, they're getting better.
I don't have a Spirit, so I can't offer any useful comparison there, sorry.
[attach id=0 msg=2504258]

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login