~ The Legendary PST Challenge November 2024 ~
-
Day 5
Starting the day with a long slow distance run (17km) at 4am. Took a shower, and commuted to a restaurant near to office and have the coffee fix (coffee/tea/milk mix) along with the PST.
[attach id=0 msg=2503246]This was not expected. When I moved, with this PST, I cut the zip tie which held the AC adapter of a small TV set in sleeping room, accidentally cut the DC wire of it as well. So here the PST is off to fix what is wrong, stripping the wire with the wire cutter.
[attach id=1 msg=2503246]Then adjusted the my goot px201 soldering iron with it's small slotted driver.
[attach id=2 msg=2503246]And the adapter is fixed with some solder, tape and heat shrink. And it is now only 9:30am, still a long day ahead!




-
Day 4

Not much use today, used it to slice some cheese at lunch. Multitools aren't my favorite to use with food as they're a pain to clean if you get then to dirty. But I'm dedicated to using it

-
ignore this
-
Great use of the small screwdriver!
@kaevin said:
Day 5
Starting the day with a long slow distance run (17km) at 4am. Took a shower, and commuted to a restaurant near to office and have the coffee fix (coffee/tea/milk mix) along with the PST.
[attach id=0 msg=2503246]This was not expected. When I moved, with this PST, I cut the zip tie which held the AC adapter of a small TV set in sleeping room, accidentally cut the DC wire of it as well. So here the PST is off to fix what is wrong, stripping the wire with the wire cutter.
[attach id=1 msg=2503246]Then adjusted the my goot px201 soldering iron with it's small slotted driver.
[attach id=2 msg=2503246]And the adapter is fixed with some solder, tape and heat shrink. And it is now only 9:30am, still a long day ahead!
-
@gra_farmer: a real Mini (not the BMW thing) is one of my dream cars. I'd love to see a photo of your Dad's Mini!
@mvp: was it a new multi?
@Barry Rowland: hammer time!

@VICMAN: I was doing some flashlight shopping this morning. The Tini looks pretty interesting. And I slept kinda badly last night. Should do better tonight, though.
@LoopCutter: that JPST looks better than mine!
@SteveC: hair removal is a constant at my house, too. Is Cassie a heavy shedder?
@FolderBeholder: I like your watch, too!

@SubMY: I typically limit my multi food prep to can opening. Because I use my ST300s at work, their openers are unlikely to see use (unless I give them a very deep cleaning).
Another great day, y'awl!

Day 4
:D
[attach id=0 msg=2503251]

[attach id=1 msg=2503251]
The opener handled the can pretty well. In case anyone is interested, the can contained Campbell's Chunky soup: cheesy jalapeño burger with bacon bits.
[attach id=2 msg=2503251]
This time I managed to not drop the tool in the can. :D
.jpg)
.jpg)
.jpg)
-
Day 4
Here is a fuzzy picture of the PST file in use:

A circuit breaker for a pool spa had not been making good contact with the busbar for a while. When an electrical contact point starts failing, the resistance of the electrical circuit at that point increases and heat is generated. The heat increases the rate of oxidation, which increases the resistance of the contact point even more. This eventually causes damage to the circuit breaker and the busbar.
In this case, the busbar had not been damaged but did need some oxidation removed. The nonaggressive single cut side of the PST file was just what I needed to clean up the busbar.
-
Some really great PST and non-PST related posts in this thread!

Day 4:
Only real use today was removing the draft guard. Not sure if I’ll get to add the new one tonight. I tried first using the Minichamp flathead and spatula for that challenge and the PST medium driver had to step in.
[attach id=0 msg=2503254]

-
-
Didn’t need to fix anything today so I only used it to open some eBay and Amazon packages.

-
Day 4 of 30
Used blade to open air filter package what i received today.
[attach id=0 msg=2503274]

-
Really liking the new additions to the PST 1.5, so far

I am really digging the pocket clip on this thing and the blade deploys well and after a bit of sharpening, the blade is sharp now :o :D
I have the Executive with me out of habit


Great mod ! I did something similar, except For my own PST2.1, I drilled a hole in the scales so that the metal tab could nest correctly ; the clip doesn't wiggle side to side that way and the clip is parallel to the scales and hugs them better, IMHO.
[attach id=0 msg=2503278]
It's close to perfect for me, every day carry in my wallet for sure. Because of a better tool set (scissors, file, serrated edge), it beats the Sideclip in everything (except for style of course).
-
@Frenchephaistos said:
Great mod ! I did something similar, except For my own PST2.1, I drilled a hole in the scales so that the metal tab could nest correctly ; the clip doesn't wiggle side to side that way and the clip is parallel to the scales and hugs them better, IMHO.
[attach id=0 msg=2503278]
It's close to perfect for me, every day carry in my wallet for sure. Because of a better tool set (scissors, file, serrated edge), it beats the Sideclip in everything (except for style of course).That would definitely help all wiggle :o Mine, so far, hasn't really had a problem because I bent the tab and it put some tension against the handle
and
that the PST II toolset is superior to the SideClip but the SideClip does have that cool factor 8) 
-
Awesome Day 4 pics, all and a great end for that day

Great start for us again, kaevin for Day 5
Glad you were able to fix that cord as well :ahhh 
-
Day 5 of 30
Office day today! PST helped me to open a PEPSI after lunch!
-

@Farmer X said:
@gra_farmer: a real Mini (not the BMW thing) is one of my dream cars. I'd love to see a photo of your Dad's Mini!@mvp: was it a new multi?
@Barry Rowland: hammer time!

@VICMAN: I was doing some flashlight shopping this morning. The Tini looks pretty interesting. And I slept kinda badly last night. Should do better tonight, though.
@LoopCutter: that JPST looks better than mine!
@SteveC: hair removal is a constant at my house, too. Is Cassie a heavy shedder?
@FolderBeholder: I like your watch, too!

@SubMY: I typically limit my multi food prep to can opening. Because I use my ST300s at work, their openers are unlikely to see use (unless I give them a very deep cleaning).
Another great day, y'awl!

Day 4
:D
[attach id=0 msg=2503251]

[attach id=1 msg=2503251]
The opener handled the can pretty well. In case anyone is interested, the can contained Campbell's Chunky soup: cheesy jalapeño burger with bacon bits.
[attach id=2 msg=2503251]
This time I managed to not drop the tool in the can. :D
-
Day 5: Cutting zip straps used to secure our dog run.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
