Minichamp November to Remember Challenge 2024
-
I haven't been hunting in years. Still trying to get my bow arm back after some nerve issues.
<u>Day 9</u>
Had another watch I had to swap batteries out on. I swear everyone's watch goes out at once.

Forgot to post this yesterday too.
Main blade x 4
Flat head x 2
Nail file x 3
Phillips x 1
Orange peeler x 1
Emergency blade x 1
Scissors x 1 -
Day 8
Had to take a sudden red-eye flight out of town yesterday and couldn't take any blades with me, so this is a make-up post. Just a shot of the MC after opening a package of sheets for laser cutting.
[attach id=0 msg=2503988]
Day 9
When I got back tonight I found that apparently all of the packages I had incoming that were delayed throughout the week due to weather must have been delivered right after I left for the airport.
[attach id=1 msg=2503988]


-
Day 9
Small blade to open a package of new flannel sheets.

-
Day 10
MiniChamp playing outside with a friend. "Come back inside for lunch. And don't get dirty." Best wishes. G
[attach id=0 msg=2503994]
-
Day 9:
Internet was out last night, so this is from end of the day. Thankfully not a lot of use and a quiet day yesterday. In the PST thread I show using the file and Phillips driver. All I did for house work was hang a coat rod. For the MC, I could’ve gotten away with a signature lite using the scissors, nail file, blade, and pen and LED.
[attach id=0 msg=2504010]
Tools used:
Flat head x2
Ruler x1
Pen x5
LED x3
Phillips x4
Cap lifter x1
Scissors x3
Nail file x2
Spatula x3
Main blade x4
Emergency blade x2
-
Birds in my backyard. Reminds me.... I might want to buy a turkey this week? Best wishes. G
[attach id=0 msg=2504016]
-
@Explorer said:
some extenuating circumstances have arisen and I must gracefully bow out of this challenge.apologies!

Maybe Bella will still find a MC use and log in
@MrToolJunkie said:
Day 8Finally used the cuticle pusher tool! I think it was Grand Banana who mentioned using it for a screw and I gave it a try on some plug covers I installed after a repairing drywall and tiles. It worked perfectly for small slotted screws. A new discovery!!
I can’t recall who suggested it to me. Maybe AzteCypher or Farmer X? Sorry, I can’t find it in the thread.
Plug covers would be the perfect use. I’ll have to try that.
@AzteCypher said:
<u>Day 9</u>Had another watch I had to swap batteries out on. I swear everyone's watch goes out at once.
I haven’t used my MC to open watches, but you’re right, I’ve got like 10 watches that need new batteries.
@Farmer X said:
Flow chart... :D And somehow I wish I had a little spring behind my house.
I thought that was great too! We looked at a house with a stream that ran through the back of the lot. It would’ve been perfect if it wasn’t starting to erode… somewhere up river the flood plain flow changed. -
@G-Dizzle: what did you bag?
@AzteCypher: that's usually how it goes!
@Cypren: that's a lot of cardboard to break down!
@MrToolJunkie: I need some new sheets, but apparently one can't buy a set without a fitted sheet.
@IMR4198: they look like they had fun! :D And did you get yourself some turkey?
@Grand_Banana: I didn't suggest the spatula as screwdriver thing. Though I may have found a good use for it.
Great work, y'awl!

-
My thoughts today are to pick up a frozen turkey. There is a spring turkey season here, but no way to legally convert one of these in my back yard into provender. These are the wildest and most cautious of critters, but they have seen me so many times that they don't regard me as a threat. Might just find a good deal on a ham instead. Either one is too much for one person, but the possums and raccoons help out with leftovers. Best wishes. G
:ahhh -
Day 10:
Used the MC blade and scissors to open a few things. Not much for today.
[attach id=0 msg=2504142]

-
Day 10: One of these does not match the others.
[attach id=0 msg=2504163]
-
<u>Day 10</u>
Just package opening duties today.


-
Day 10
Testing and fixing some print issues with stringing and layer misalignment this evening. Minichamp served as a prying tool, scraper and knife while doing it.
[attach id=0 msg=2504175]

-
What do you print on?
-
Day 11
Mini in the mail room. Planning. Organizing. Coordinating. Controlling. Opening junk mail. Thinking about breakfast. Oops. That last one was just me. Hold down the fort Mini, while I go crack a couple of eggs and make some toast. Best wishes. G
:D [attach id=0 msg=2504182]
-
Day 10
Forgot to post yesterday... but opened several clamps shell packages with the package opener.

-
@Grand_Banana: sometimes a slow day is a good day!
@G-Dizzle: nice buck...and I didn't know Morakniv made kitchen cutlery.
@AzteCypher: what did you get? New multis?
@Cypren: hope you have that sorted out by now.
@IMR4198: I'm just glad the political propaganda is out for now! Breakfast for me is still counterfeit Pop-Tarts and coffee.
@MrToolJunkie: I hate those things. I open them with a utility knife if at all possible; they're kinda rough on blades.
Great work, y'awl!

-
@AzteCypher said:
What do you print on?Bambu X1C. It was packed in storage with a bunch of our belongings from the move and I just set it back up a few days ago, so there was some maintenance that needed to be done: lubricating screws, retensioning belts, recalibrating vibration compensation and so on. Plus I've been trying to figure out what of my filament survived the move and what was just too damaged from the humidity, so the spool dryer is running around the clock. The latest tests I've been running have been doing well, though, so I think it's pretty much back in action.
-
Day 11
The package opener is getting a workout this week. Opening a package...worked great.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
