I need a new MT
-
My absolute must-haves are pliers, flat head sd, and phillips head sd.
Really want, but could do without...scissors, bottle opener and can opener.
Not important all...knife blade.
I want to buy new. I don't want used. I don't want anything out of production.
Something nice, maybe high-endish. I want a quality tool. Nothing tacticool.
-
A Free P2 would fit your criteria, but I don’t know if they’re still available on Amazon where you are. Better scissors than the knifeless Rebar (or any other Leatherman except the Surge)
I’ve got one Gerber, one SOG, one Victorinox Swisstool, and over twenty Leathermans. I think that tells you what brand I’d recommend.
-
I don't really have any recommendations, but I remembered you are a CASE Peanut fan. Best wishes. G
:D [attach id=0 msg=2505768]
-
I saw Crunchie's recommendation and looked to see if P2 was still available. AXXXXX listed them for $90 as a Black Friday special. $39 dollars off. Best wishes. G

-
Both of my suggestions have a plain edge knife but are more or less what you are wanting (one has more than you want the other on the lower side) The Curl is basically a smaller Wave and the other suggestions I have the Skeletool Cx
the Cx is a bit nicer as it has an upgraded blade but the Curl has more features
they both do have bit drivers instead of dedicated drivers and that may be a deal breaker for you
The Cx is also available in several colors now
the regular Skeletool could also be recommended but it has a combo blade vs the plain edge 
-
So far I'm thinking maybe a Rebar, Bond, Wingman or Sidekick.
I am likely going to end up with something that has a few extra tools. It does not appear that anyone makes a MT with such a bare-bones tool offering. With that being said, I could possibly expand my search...and end up with functions I don't need, but that's just how it is I suppose.
As an additional note, I do not want to go the bit driver route at all.
Keeping in mind one of my priorities is quality. Is Leatherman that much better than the other brands? Should I be looking at Gerber, SOG, or Victorinox also? Are their other brands worth looking into?
-
Of those four. Rebar, Bond,
Wingman, Sidekick. Best wishes. G
:( -
Of those 2 that are left, I would 100% go with the Rebar
they are a great tool and I carried one for many years to work daily and it never let me down
the Bond is great but the Rebar isn't much bigger or heavier but has a lot more tools and they all lock 
-
If it's going to live in your desk drawer it might as well be a nice tool with a complete loadout. Since you don't care about a blade, I would also suggest the knifeless Rebar, but I would also look into the Victorinox Spirit X just because it is a very well thought out tool that is nicely finished and has smooth edges which makes it very comfortable to use. I'm carrying one now.

-
I had almost settled on the Leatherman Bond. Noone was suggesting Victorinox, and I had already decided against Gerber and SOG.
But, since Mr Alan K spoke up and suggested the Spirit X I thought I would take a look. Checked out a few vids on youtube and now I am thinking hhmmmm.....
-
Leatherman Rebar or Bond for pocket or belt with a Leatherman Micra on the keychain.
Both still in production and actually, those Micra scissors have a whole different size and spring setup more reminiscent of the PST II. Best little multitool scissors on the market.
-
Wingman, Sidekick, Rev quality really is lesser than the Rebar, Wave, Surge type of Leatherman tool.
By the way, if this thing is going to live in your desk drawer and not really be carried? Get the Surge.
Great scissors, great plyers, great screwdriver sets with swappable bits. I know you dont want the bit driver route, but it's a thought. With a good spring, I've yet to lose a bit.
-
@Ozark75 said:
I had almost settled on the Leatherman Bond. Noone was suggesting Victorinox, and I had already decided against Gerber and SOG.But, since Mr Alan K spoke up and suggested the Spirit X I thought I would take a look. Checked out a few vids on youtube and now I am thinking hhmmmm.....
Get both!


-
You missed your cue, Alan. If someone is torn between two items, you have to say, "Buy both of them." I think that is in the MTO rules somewhere...... ? Best wishes. G

-
Fixed it.

-
Good work, Alan. I forget how many it takes to get your Enabler Badge. You might already have enough. Best wishes. G

-
I do own a Wingman, and another multi from that same frame style. I like them just fine. However, you did say you wanted to buy a top-tier tool. The Wingman, Sidekick, etc. are more of an economy venture for Leatherman. They are sturdy and usable but have a few shortcomings. The file is short, not a full profile Phillips driver, slot driver is thick and too big for a lot of screws. It takes a lot of break-in to work some of the stiffness out. Pocket clip is wiggly. If you try to tighten it, the blade is hard to open. Not everyone likes the combo blade. The handles have a very wide splay when you are using the pliers. That's why I marked through the Wingman and Sidekick in my previous comment. Best wishes. G

-
@IMR4198 said:
Good work, Alan. I forget how many it takes to get your Enabler Badge. You might already have enough. Best wishes. G

Well guess what? I might just get both. The PST belonged to my father, so it has sentimental value. It might go to the safe.
So, now I'm thinking Gerber in the car, Spirit X in the kitchen drawer, Bond at the office and PST put away for safe keeping.
-
Sounds like a plan. Best wishes. G

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login