Alox forever!
-
@SubMY said:
Sorry to jump in but that is a brilliant idea, I'm doing a challenge this month and have all my other knives locked up, but I have a solo that's been sitting around that I'm thinking I need to do this to.Although I'm wondering if perhaps doing a "two face" easy open with only one scale cut low would give you enough purchase while helping to lessen the hotshots it creates.

That’s a clever idea.

In its stock form I can pinch the blade open, though just barely, so I think any relief of the scale would help make it easier, even just on one side. And it does seem like one side would be less of a hot spot.
I think the biggest issue would be doing the mod without damaging the scale you want to leave alone. Unless you disassemble the knife to do it, which I wouldn’t want to do, personally. You’d need a pretty steady hand to grind one scale without nicking the other.
-
@Swisster said:
seems like it would be a hotspot on the knife if used for any real length of time. I does make it easier to open and looks good but ...........That photo is of my knife. I made the EO notch with a Dremel sanding drum, then polished it a bit.
I’ve noticed no “hot spots,” but I generally don’t use any folding knife for an extended period. I pull it out, cut the thing, and drop it back in my pocket.
-
Just picked up this Old Cross Electrician. It's definitely worked for a living before ending up in an antique shop curio cabinet. Off for a long soak in some warm water now.

-
@Frailer said:
That photo is of my knife. I made the EO notch with a Dremel sanding drum, then polished it a bit.I’ve noticed no “hot spots,” but I generally don’t use any folding knife for an extended period. I pull it out, cut the thing, and drop it back in my pocket.
That was an awesome mod!

Sorry I used your pic without permission/credit. I had saved it awhile ago and couldn't remember where I found it :-\
-
@gustophersmob said:
Sorry I used your pic without permission/credit. I had saved it awhile ago and couldn't remember where I found it :-\No apology necessary, and no permission required. I wish I could remember whose photo I used to help figure out exactly where to put the notch.
-
@gustophersmob said:
Looks like its still got a lot of life in it!
it's lost the very tip of the main blade and been roughly reprofiled. Hopefully I can do a better job. Lots of scuffing on most of the tools. I'll give them a rub back but keep it honest. Alox has a little bit of wear but is mostly just grubby. -
@Frailer said:
That photo is of my knife. I made the EO notch with a Dremel sanding drum, then polished it a bit.I’ve noticed no “hot spots,” but I generally don’t use any folding knife for an extended period. I pull it out, cut the thing, and drop it back in my pocket.
It's a very neatly excited job.

-
@Farmer X said:
Those blades have seen their share of use...is the tip of the electrician's blade rounded a bit, or is that a trick of the camera? Regardless, that's a pretty nice find!
No, you're right. Tip on the electrian blade is definitely rounded out. I've yet to sharpen anything but I have managed to polish the more superficial scuffs out. I don't need it to look brand new, just a little more cared for.
-
One of my personal favourites. I do like the pop of the red shield.

-
Mine too!

-
-
You and me both. Talk about a grail SAK!

-
My newest Alox, the Bantam. Love how slim it is.

-
Well because the Skizzors and the Mainblade on my Roxon Flex works more so semi , (they cut but the Mainblade could be sharper and better to hold, and the Skizzors tend to get stuff as this Spring is a bit flimmsy ) i did decide to still corry the Roxon, but whit Phillips, BitDriver, Wood and Metal Saw instead of the Rimer, Bottle, Canopener, Blade and Scizzors, and the other Tools are now on my ALOX Pioneer LE 2024 in this sorth of Gold or Brass Color ..
I really hope Victorinox will some time in the future bring an Alox whit Back Tools (Korgscrew)..
-
I’ve been carrying my Pioneer for a couple days now off and on. I still can’t believe it started as a SAK I thought I’d never enjoy carrying and quickly turned into a favorite.
[attach id=0 msg=2513874]
It’s seen some harder use over the last year, been a repeat user during the Alox challenges, and just these last couple days I’ve noticed the wear on it. I’ve kept a decent edge on the blade, except the tip, but it’s not quite as good as it could be. The knife doesn’t look as bad as I thought it should. The can opener is still sharp but has seen better days. The flat head has been used a lot and shows it. And the awl has been slightly reprofiled when resharpened. It has also been used extensively.
[attach id=1 msg=2513874]
[attach id=2 msg=2513874]
Perhaps this thread should be Alox [will last] forever. It’ll likely outlast me that’s for sure.



Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
