The December 2024 Utility Knife Challenge
-
Day 3:
Recently learned Walmart had two different Benchmade Bugout clones--partial liners (just like the real deal) and unknown steel with white handles for $5, and D2, skeleton liners, and orange for $10.
Thus, I bought a few extra as Christmas gifts when people show up. D2 for people I'm closer to, budget for others. I had selected Tuesday, assuming WM would just ship them to me. They ended up having someone deliver it from the store just a few minutes ago.
I have to admit, these certainly don't feel like a $5 knife. Can't wait to see how the D2 one will be.
[attach id=0 msg=2507387]

-
Day 3
Continuing on with the Milwaukee Fastback and PST combo. The fastback has a handy clip that supports tip down carry. It is a deep carry clip which I like. However, I do have a strong preference for tip up carry. It is one of the things I would change if I could. It also has a handy lanyard loop on the clip side should you need it. One thing I should note is that the handle is plastic. I really thought I would hate a plastic handle, but I am now prefering it on a utility knife. The reason is that when the outside temperature drops the handle is more comfortable than a ice cold aluminum handle.
JonesE
-
@Fireman said:
That's a great duo of tools. I've got a Milwaukee Fastback, but not the one with the screwdriver. However, my wife was just asking about what I want for Xmas... ;)Thanks Fireman, If you are able to pick one up I think you will really enjoy it. I think it is one of the better Multitool utility knives out there. I have lost a couple. I think I now have two or three scattered around the garage and truck.
JonesE
-
Day 3
Opened some extra blades that will presumably come in handy later during the challenge.

-
This will be but a brief post...I have to steel myself for payment of phone bill and a hefty gas/electric bill. But y'awl are doing great!

Day 3
I used the black topo EAB to open a bag of cat food. Of course, the action shot was a blurry mess.
Tommy wasn't too keen to look at the camera, but I'm sure he's grateful to have his food.[attach id=0 msg=2507401]
Utility knife record: 3-0.

-
Day 4
Neiko 00678A
Yeah, maybe skip this and get something else.
It's a pivot lock (button lock, but the button is the pivot). But it cannot be opened with one hand. Pressing the button unlocks it, but it is incredibly stiff, so it does not flick open. But you can close it with one hand, so there's that.It holds two bits, but they left space above them(presumably to allow a finger to fit behind the bits and unfold them) that the bits can slide back and forth in their holder. And they're loose in there.
The pocket clip is a very shallow carry. Almost half the tool would stick out of the pocket. Absolutely terrible. It could have gone to a dozen other positions and been ok.
It holds three spare blades. And it works to cut things. Not uncomfortable in the hand. But the design choices are questionable. I regret getting it. I thought it was a copy of the Hart utility knife, but the Hart is much better.



-
Day 4
Last of the MUJI cutter series (that I have). This is an updated design that is able to mount the blade the other way such that it is OK to operate with left or right hand. It is still the same minimalistic design but changed the slider to white. And the "dot" in the slider is smaller to make flipped mounting possible. Tip of the main body is updated to symmetry as well.
As said earlier MUJI often asks manufacturers to make their own version. This left/right hand feature is also seen in NT cutter. So I suspect it is OEM by NT cutter, but it is only my speculation.
[attach id=0 msg=2507417]
Front[attach id=3 msg=2507417]
Back[attach id=1 msg=2507417]
Disassembled[attach id=2 msg=2507417]
Back of parts



-
... Continue
[attach id=0 msg=2507418]
Normal mounting of blade (right hand)[attach id=1 msg=2507418]
Flipped mounting (left hand)Overall it is a reliable auto lock light duty cutter with pleasing look.
[attach id=2 msg=2507418]
Shot with other MUJI Cutters I have.



-
<u>Day 3</u>
The breaking down of boxes has commenced. I suspect I'll be doing a lot of this during this challenge along with cutting down cardboard so that it fits in the recycling bin.

-
@Fireman said:
<u>DAY 3</u> I've got a couple of these knives that say Project Source on the handle. I think I must have bought them for my wife to lose instead of my good ones.[attach id=0 msg=2507327]
I agree, this is also why I have tossed cutters around the flat.
@ReamerPunch said:
Day 4Neiko 00678A
Yeah, maybe skip this and get something else.
It's a pivot lock (button lock, but the button is the pivot). But it cannot be opened with one hand. Pressing the button unlocks it, but it is incredibly stiff, so it does not flick open. But you can close it with one hand, so there's that.It holds two bits, but they left space above them(presumably to allow a finger to fit behind the bits and unfold them) that the bits can slide back and forth in their holder. And they're loose in there.
The pocket clip is a very shallow carry. Almost half the tool would stick out of the pocket. Absolutely terrible. It could have gone to a dozen other positions and been ok.
It holds three spare blades. And it works to cut things. Not uncomfortable in the hand. But the design choices are questionable. I regret getting it. I thought it was a copy of the Hart utility knife, but the Hart is much better.
This is the first time I see a utility knife a bit holder designed this way.
-
@kaevin said:
This is the first time I see a utility knife a bit holder designed this way.It's the same thing on the Kershaw Select Fire knife. And the Hart utility knife, and probably others. The Neiko is the only one I have with that kind of holder. On other knives it is probably ok. On the Neiko it's not.
-
<u>DAY 4</u> Mossy Oak cutter vs packing tape.
[attach id=0 msg=2507444]

-
Day 04
The Work Pro, which looks just like Fireman's Mossy Oak, helped add fluid to a Zippo.
-
Day 4
Late afternoon snack with hot coffee.
[attach id=0 msg=2507476]
My knife sliced open the Christmas Cake cellophane.

-
@ReamerPunch: I'll heed your advice. Seems that one could use a couple-few rethinks.
@kaevin: I like the ability to replace the snap-off blade!
@AzteCypher: I'll get to some cardboard soon enough. But today was not that day.
@Fireman: no doubt the packing tape lost!
@Alan K: I used to refill a Zippo with astonishing regularity. Now I can't remember the last time I did so.
@LoopCutter: looks interesting! Did it have any mint flavoring to it?
Day 4
Today's mail presented an opportunity to see how the EAB handled letter opening.
[attach id=0 msg=2507496]
Owing to the manner in which the blade was mounted...not that great. But a win is a win.
[attach id=1 msg=2507496]
Utility knife record: 4-0.
.jpg)
.jpg)
-
-
“ LoopCutter: looks interesting! Did it have any mint flavoring to it?”
@ Farmer X - no this is a Lil Debby Tree Cake. I bought a couple packages for the holidays. May actually last me till Easter if I am not hosting visitors.
-
Day 4
Opening...
[attach id=0 msg=2507509]An encyclopedia set from the year we got married (I wanted a set for that giant bookshelf. I let Mrs. Roberts pick the year.)


-
@BPRoberts said:
An encyclopedia setI had a set of those in about 1972. That was the closest thing we had to an internet back then.

Excellent pics and uses, peoples.

-
Day 5
Another day of Kaevin mumbling about his snap off utility cutters.Today this cutter is very similar to the ones before. It is made by Taiwanese stationary company SDI. The locals call it "hand brand".
SDI 0439C
[attach id=0 msg=2507513]
Front[attach id=1 msg=2507513]
BackThis is a classic stainless steel design. The stainless steel body has "STAINLESS STEEL" stamped in the front and "SDI" stamped on the back. There is a hole in the body, which I guess has something to do with tooling or manufacturing process. The body seems to be made from a polished sheet, bent to shape and the sanded to the brushed look.
The original sticker with SDI Logo and things in red on the black slider just stand out too much to my taste and I have torn it off.
The snapper is polished or nickel plated. I cant tell which is the case).
[attach id=2 msg=2507513]
Parts
It originally comes with a 30 degree blade but it was used up and replaced with a 3M titanium coated 45 degree.[attach id=3 msg=2507513]
Back of parts



Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

