The December 2024 Utility Knife Challenge
-
Day 9
Engineer pliers in Orange!

And a freebie Hello Kitty ziplock bag.
The Fiskars mini utility knife... well, it sucks. Very heavy, very long, too thick. The blade holder has play in both opened and closed positions.
If you want a small folding utility blade, get the Gerber EAB or something similar.
-
@ReamerPunch said:
Day 9Engineer pliers in Orange!

And a freebie Hello Kitty ziplock bag.
The Fiskars mini utility knife... well, it sucks. Very heavy, very long, too thick. The blade holder has play in both opened and closed positions.
If you want a small folding utility blade, get the Gerber EAB or something similar.I like those engineer pliers, first time to see an orange one and it comes with a matching cover!

-
Disappointed to hear about the Fiskars Mini Utility Knife because I like the looks of it. I guess you really have to be mindful of the intended end user of something like that before you buy it. The Fiskars Mini is obviously meant for crafters and not anyone who is going to beat the hell out of it cutting up boxes, cutting shipping wrap off pallets or stripping cable all day.

-
Dozed off before I could do my posting yesterday.
<u>Day 8</u>
Just a few tasks to get done around the house, such as opening up a new package of paper plates.

Opening up a present for the wife.

Used the EAB as a thin flat edge to get the burned out bulbs out of this candy cane strand. Still have two more strands to do today.

-
Day 9
Got a Stanley utility knife with me today. The model is a 10-779 Dynagrip. I picked this one up sometime in the mid 90s. This one is a made in the U.S.A. model. I did a Quick Look and surprisingly it is still in production, but like all things Stanley Black and Decker, now made in China.
When I found it yesterday while cleaning the garage, I must have put it way in a hurry. It was pretty filthy. So last night I disassembled it and gave it a through cleaning and got rid of the years of accumulated guck. I found the blade was still a Stanley blade, so I swapped it around putting the fresh edge forward. Not surprisingly, I didn’t have any spare blades in the handle.
In looking over the Stanley, I was happy to enjoy how ergonomic it is since it has been a very long time since this one has seen the light of day. The yellow paint makes it very easy to find and the rubber inserts give it a sure grip with wet or oily hands. This one is not the smoothest with retracting and extending the blade. I noticed that the interior of the knife is painted the same yellow as the exterior. The more I use it use it the it is becoming easier to deploy the blade. It is starting to wear down the paint in the blade channel. I am amazed at how thick the paint is on this knife.
I know some of you have been posting your Stanley utility knives and I have enjoyed seeing them. If you have an old Stanley, please post it. I would like to see it.
-
DAY 9 Another old Stanley that lives in my truck.
[attach id=0 msg=2507958]

-
Day 09
The green beast again. USA made 10-079 used it today to slash open another package.

-
Day 9
No knife action today.
My 3 were handy and within reach.
[attach id=0 msg=2507989]

-
Day 9
Replaced a cover plate. Not super thrilled with the driver. It's hard to deploy, doesn't lock in position well, and it's off the centerline, which makes it awkward to use. It does detent at 90 degrees, which is probably the better position for it.

-
I'm not gonna ramble today, both because it's late here and the photo will be of some interest...
Day 9
Since comis appears to be on hiatus, I asked AzteCypher to help with badge design. Here's my basic idea. Apologies for my complete lack of artistic skill.
[attach id=0 msg=2507997]
Utility knife record: 7-0.

-
Day 10
NT Cutter A-500RP[attach id=0 msg=2507999]
Front[attach id=1 msg=2507999]
Back
A-size plastic handle cutter with 5 blade cartridge. This is the middle grade 5-blade cartridge A size cutter. The entry only plastic model being A-551/A-552, middle A-500RP and top metal being A-1000RP. The mechanism is brought from the larger L-size model L-700RP and L-2000P (6 blades). This model seems to be discontinued and disappeared from NT-cutter's catalogue completely, which is understandable as the price difference between it and the metal bodied A-1000RP is not much. If someone only want to "save some money" while wanting to try if a cartridge model is desired, s/he will go for the A-551 instead.The A-500RP comes in two colorway, bright red/red or black/red. The one I have is in black and red. The handle is made from plastic, which actually is not a bad thing. It has a curvy top for added comfort, and some "cuts" at the top and bottom for adding grip. The plastic itself is high quality with matted satin finish, giving a pleasant feel to hold. And plastic give it a warm touch instead of cold metal touch to it. It has some weight to it despite having plastic handle. It feels secure to hold.
[attach id=2 msg=2507999]
Top[attach id=3 msg=2507999]
Bottom



-
Continue 1
The core body part is stainless steel and attached to the plastic with a screw and nut. At the tip of the core part, the stainless steel sheet is slightly bended inward again in the middle to help stabilizing the blade, it has virtually no sideway play when used with regular 0.38mm blade.
[attach id=0 msg=2508000]
TipThe end part of cartridge and end cap lock are plastic. The end cap does not have a snapper built in, but it comes with a separated big red triangle snapper piece. The cartridge itself is made from a piece of stainless steel with a little spring hook, wrapped around the end cap part. They are not separable.
[attach id=1 msg=2508000]
[attach id=2 msg=2508000]
Front of parts[attach id=3 msg=2508000]
Back of parts



-
Continue 2
The mechanism works in this way. The spring in the cartridge keeps unused blade in place. When the slider is pushed all the way to the front, the spring in the front part pushes the metal in slider slightly upward to dis-engage the slider from the blade.
[attach id=0 msg=2508001]And after the user pulls out the used blade...
[attach id=1 msg=2508001]... and push the slider all the way back, the spring in the middle of the main body lifts the blade up beyond the retaining spring of the cartridge to make the blade engage to the slider.
[attach id=2 msg=2508001]To remove the cartridge the lock needs to be pressed at the back towards the front and the cartridge can be pulled out and reload all the blades needed.
[attach id=3 msg=2508001]



-
Day 8:
Went to Advance Auto to buy some washer fluid, and came across an interesting contender, the Coast DX125.
First thoughts are that it's SUPER lightweight--probably the lightest one I've had. Rattles some, but that was fixed by swapping the thin cheap included blade for a Craftsman USA blade. I also like the nylon handle compared to metal. But, the plastic push-button release for blade change feels flimsy.
[attach id=0 msg=2508003]
Personally though, my favorite small utility knives are the Stanley 10-049 and the Gerber EAB. They're both small, light, and just plain work. And not crappy in the least.
Bought an Airfix Quick Build Lambo Huracan kit at Lowe's today. They had this one and the Raptor, and I've already got the former. These go together kind of like LEGO. I prefer these, as most model kit companies in the US either keep using old tooling, or acquire old tooling. The kit molds that companies like AMT use often is from the '50s and '60s, and is worn-out. Plus, the plastics they use are cheap. Thus, the pieces don't fit together well without a lot of cutting and sanding, and they often end up warped, requiring a lot of tape, clamps, and rubber bands to ensure they stay in position while gluing--even supposedly "Snap Fit" kits require glue. These kits go together rather well, and look good. The stickers used don't stick well, however. I'm planning on replacing the intake trim with paint, as well as painting the brakes.
Used the Coast to clean up the mirrors, wheels, and tires--all of which came on sprues and still needed a little work after my flush cutters.
[attach id=2 msg=2508003]
[attach id=1 msg=2508003]



-
Continue 3
[attach id=0 msg=2508004]
Spring pieces in the bodyI always wanted to have the NT cartridge metal (A-1000RP). But I could only find this plastic middle model. So I bought it first and got the A-1000RP many years later (I think more than 10 years). Due to the cartridge, the A-500RP is thick, but it is very ergonomic because of the thickness and curved plastic body. Together with the fun/cool factor of cartridge and the stability of the blade thanks to the tip design, it is always a joy to cut something with it especially for precision work. It only has two/three drawbacks. First, due to the mechanism, one would like to keep it clean from dirt. Second, the satin finish is easy to damage/scratched. And lastly it cannot flip mount the blade due to the reload mechanism (only if you are left handed user). But I like to keep this always in my bag, knowing I always have a trusted, well designed cutter with extra blades with me. I highly recommend this A-500RP and A-300GR if anyone is looking for quality light duty snap blade cutter.
[attach id=1 msg=2508004]


-
<u>Day 9</u>
Used the EAB to cut open a package of carabiners for something I picked up from the Surprise GAW Box.

-
Day 10
My Olfa autolock snap-off. I keep it in my Maxpedition Micro.

-
@ReamerPunch said:
Day 10My Olfa autolock snap-off. I keep it in my Maxpedition Micro.
Nice tool pouch and SVR-1 there

-
@Farmer X said:
I'm not gonna ramble today, both because it's late here and the photo will be of some interest...Day 9
Since comis appears to be on hiatus, I asked AzteCypher to help with badge design. Here's my basic idea. Apologies for my complete lack of artistic skill.
[attach id=0 msg=2507997]
Utility knife record: 7-0.
Somehow it reminds me of the NHK mascot Domo-kun https://domokun.fandom.com/wiki/Domo
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
