The December 2024 Utility Knife Challenge
-
Also got an Engineer PZ-58 in limited black.


-
@ReamerPunch said:
Also got an Engineer PZ-58 in limited black.
Glad to know I am not the only one bitten by a plier bug.
-
@ReamerPunch said:
I am very sorry to have jumped in after Farmer X asked you to design the badge. I was at work and bored and I thought I could save you the trouble.
But you did a great job.
Day 17
I really like this one:
I have samekind utility knife ( Stanley 99E), but only drawback on this model is that you need to unscrew it to change blade but you can store blades in it
-
Day 17
Toughbuilt 5-in-1 Folding Utility Knife TB-H4-12-IM
[attach id=0 msg=2508736]
Front, the plate is plastic[attach id=1 msg=2508736]
Back with clip, the plate is metal (steel?)I got this TB utility knife a few months ago. It is very capable and solid. It is mostly made from metal, with one side being high quality plastic. The paint is beat up on mine, and I have replaced the original double ended bit with a vessel one (65mm) and grinded down the slotted side to make it 60mm.
[attach id=2 msg=2508736]
Blade (original) having touched up with a diamond file on one side after dulled. The blade only lock closed and fully openedIt includes a blade (with wire cutter notch), a bit holder with magnet that can accommodate up to 60mm long bit when folded, including a double end PH2 and slotted and a pry bar. It also includes a metal clip on the back, and a blade storage for 2 blades with magnet.
[attach id=3 msg=2508736]
Bit driver is centered, which is a huge plus over the Milwaukee and alike. It only locks closed or fully opened, would be great if it can lock at 90 degree. Be careful if you intend to use it with a bit extender, if it is a normal full "hex" extender, I have had the magnet attracted to it and pulled out when remove the extender. No issue if you use a smaller one like the Leatherman (ratchet) extender. You can also pull it out, epoxy and put it back as well.



-
Continue
[attach id=0 msg=2508738]
The pryer is press-and-slided. Beside prying things, I use it to press lift buttons sometimes.[attach id=1 msg=2508738]
The blade storage, there is a magnet to keep the blade from falling out.[attach id=2 msg=2508738]
Everything opened and pulled out


-
Continue
Some attempt at taking it apart
[attach id=0 msg=2508739]
[attach id=1 msg=2508739]I wanted to take the bit holder part out and put one extra notch to make it locks at 90 degree, but never finish the attempt.
[attach id=2 msg=2508739]
When it was new...


-
Continue
I am very happy with this TB-H4-12-IM. It is tough as its name with just enough function I need most of the time, pairing up with a Knipex Cobra 125. If I need to take things down I can pair this duo with a bit kit and a Surge with LM extender. Then I will have 2 drivers and 2 pliers. Fit nicely in a small pouch.


-
@ReamerPunch said:
I am very sorry to have jumped in after Farmer X asked you to design the badge. I was at work and bored and I thought I could save you the trouble.
But you did a great job.
Day 17
I really like this one:
No apologies necessary at all. I contemplated telling Farmer that he should go with your design but I did say i would design something. Plus I was at work, and it was a slow day yesterday so...

I do like your real life rendition!

-
Nobody cares what I think, but that hasn't stopped me from commenting before so.... I like the purple round emblem with the white lettering. I glanced at the tombstone shaped ones the other day but haven't compared them. Either type would serve the purpose for a badge.
I got bored Sunday, and took out my old fixed blade Stanley. I didn't throw away the old dull blades, just put them back in the handles. Years ago, I suppose. Took out my medium Arkansas stone and put an edge back on the used blades in short time. I knew these things would sharpen well, but hadn't sharpened a utility knife blade in a long dreary time. The good part of a utility knife is not having to sharpen it. Toss the blade. Put in a new one. Or break off a dull section. I get it. I just like to sharpen things and had the time in this case. Best wishes. G
;) -
Day 17
I'd heard about EDCing a utility knife for a couple of years, on forums and through some videos, but I thought it was a silly idea. I've carried some pretty nice premium knives over the years so the idea of one of these little, replaceable razor blade knives just didn't do it for me. Then I selected one of them out of the Sos Surprise Box /topic/90040 because I figured the best time to try one would be when it was free. Turns out that these utility cutters are all you need for most of our daily cutting tasks such as opening packages, cutting tape, cutting string, etc.. They really are very convenient, and it is nice to replace the blade whenever it gets dull. I liked the light weight WorkPro so much that when I lost my first, I replaced it with a 3 pack. But, then again, that is the MTO way, isn't it?

-
Day 17
Opened a Pop Socket for my wife.

-
@cody6268: kinda the same here. It'll probably be lights out for me within an hour of this post.
@ReamerPunch: fantastic rendition, and you may well have me nosing around in the Pliers Rabbit Hole!
@kaevin: that ToughBuilt looks like it could be pretty handy!
@AzteCypher: sometimes a slow day at work is good...though I doubt I could get away with designing badges.
@IMR4198: I like both designs, so I'll abstain from voting on them.
@Alan K: that's a very accurate assessment!
@BPRoberts: I thought about a Pop Socket, but I ultimately rejected the idea. Probably they'd reduce my phone's suitability for back pocket carry.Day 17
I opened yet another bag of cat food. Since I failed to get an action shot, here's one of the silver EAB and Bluegrass. He may not look it, but I'm sure he's grateful.
[attach id=0 msg=2508826]
This was a close contest, like a football game with a final score of 35-36. I had to closely examine both sides of the top of the bag (this was one of those odd sort of woven plastic affairs, not paper). The Stanley cut just a hair cleaner, so it gets the win.
Utility knife record: 12-0.
Stanley record: 2-3.
DeWalt record: 3-2.
-
With apologies for two consecutive posts, it is now time to put the badge design to a vote. Do my fellow challengers prefer those designed by AzteCypher or ReamerPunch?
-
Day 17
[attach id=0 msg=2508837]
New sheepfoot blade arrived for Stanley 10-049

-
Day 18
Hao Feng Li HFL-221
[attach id=0 msg=2508843]
Front[attach id=1 msg=2508843]
BackI have already shown all the better quality cutters/utility knives. So this time the subject is this first L-size cutter I got, possibly left behind by workers at my home.
It is typical Cheap-Chinese quality. It works (to a certain degree), and it's cheap. The body has a metal rail, which has it's brand name "Hao Feng Li" (very sharp) as well as another 3 words meaning "save effort" stamped. The back also have a sticker in a recessed area showing it's brand name, and the sticker is off center. The main body handle, snapper and slider are plastic.
[attach id=2 msg=2508843]
PartsThe snapper can slide out for changing blade, however the slit has warped and very hard to be used as a snapper (if not impossible). Better off pulling out a plier which I guess is always with a house renovation worker. Beside the warping, the plastic is too weak and thin to be used anyway, which probably will get the user hurt if used.
[attach id=3 msg=2508843]
Slider and snapper. Notice the slit gets narrower in the middle, hard to jam in the blade.The slider has a little spring in it. It only moves when pressed, when it returns to original height, a metal part of it locks to the teeth of the rail.
The blade is ok, but the lines for snapping off is too shallow. One must be very careful to snap it off clean with a plier.
Overall I think this is a dirt cheap cutter that does the job and not be afraid of being stolen or lost. The slider lock design is surprisingly well done. The only thing that makes it bad is cheap plastic, the wrapping of snapper, and even if the snapper plastic is good, it would be hard to be used anyway.
I have 2 Olfa's on my way. One of them with the Tajima will replace these two hopefully.




-
Day 16: Bought a new mat from Sam's Club for the kitchen. I'm thinking about buying one of these for each entryway, as well as high-traffic areas. They're easy to clean, and the backing is made from recycled tires, so it's pretty grippy.
I first used the Carpenter's Knife to start cutting away the plastic seal, but had trouble.
[attach id=1 msg=2508844]
Grabbed an older Kobalt I keep in a coat as the handle has a cutout that allows the blade to form a strap cutter. Thus, I was able to slit away the plastic without worrying about cutting the rug.
[attach id=0 msg=2508844]
Also opened up the chicken tenders with the Stanley.
[attach id=2 msg=2508844]



-
<u>Day 17</u>
Needed some assistance ripping the plastic sheeting off these cinnamon sandies.

-
Day 18
My no name snap off cheapo.

-
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

