The December 2024 Utility Knife Challenge
-
Good work on the blade and scale swaps. The one with the black blade is a good contender for the Feb. combo edge challenge.

-
Day 27
Used the WorkPro to open a pill for the cat.
-
Stopped by the hardware store and grabbed some Lenox utility knife blades and a Klein micro bit screwdriver.
JonesE
Nice! I've had that same Klein model for almost a month, and it's almost perfect. Lowe's sold out quickly, so they're obviously popular. I like the Snap-On mini prybar as a prybar, but a small pocketable multi-bit driver has been a headache. I don't like the Picquic handle. Wera has some nice options, but they're not sold in stores (still am ordering one). PB Swiss is absolutely perfect, but they make Snap-On seem cheap. Thus, $15 and most bits I need on a regular basis (I admit, I do use two sizes of hex on it every now and then) was just what I needed.
-
Day 25:
Opened a feed sack for the sheep.
[attach id=0 msg=2510252]

-
Day 26: more of the same as I finished unloading the car prior to a trip to the dump and Dollar General.
Cat food:
[attach id=0 msg=2510255]
Chicken corn:
[attach id=1 msg=2510255]


-
Day 27
[attach id=0 msg=2510260]
Recycle day. Cut box s down.

-
Day 27
Took the tag off a pair of pants for my wife.

-
<u>Day 27</u>
Broke down some boxes for recycling this evening and opened up some batteries to fix a musical ornament.


-
Day 28

-
Day 28
NT cutter S202
Printers are machine sent from hell to torture us, refusing to print in black when 1 color is low. Cutting open a package which failed to tear open.


-
Save for trying to get Cody to take some sheep photos (especially if there happen to be any lambs about), I am going to eschew mentions in favor of catching up and making a PSA. I have finally contacted a moderator about getting a badge approved. Hopefully they can get it done quickly.
Day 27 (catching up)
The EAB probably could have cut the last of the lasagna in half, but cleanup would have been awful. Better to use a dedicated paring knife.
[attach id=0 msg=2510351]
[attach id=1 msg=2510351]
Day 28
Time to dispatch some cardboard. Each piece was cut with and across the corrugations. Both blades performed so well that the result was another tie.
[attach id=2 msg=2510351]
Utility knife record: 22-1.
Stanley record: 3-4-3.
DeWalt record: 4-3-3..jpg)
.jpg)

-
Day 28
Got Pumpkin a couple new toys and cut the tags off. Hurray for post holiday clearance.

-
Day 28
Family Christmas get together this evening. And, despite telling them multiple times, “Do not buy me any gifts!, I have what I need!”
Nope, I received new pullover 1/2 zip shirts, three Carhart trousers, (my wardrobe is dated), car wash tickets and this box!!!!
[attach id=0 msg=2510363]
Containing a NUGGET ICE MAKER, countertop model. Something I do not have…

-
@BPRoberts said:
Day 28Got Pumpkin a couple new toys and cut the tags off. Hurray for post holiday clearance.
I normally buy most of my Breyer horses in January, when Tractor Supply usually has things at 50% off. They did that the day after Christmas here, and I was surprised to find they'd sold about 80% of the toys they had just a week before Christmas--normally, most of the stuff they have sits around a month or so.
-
NT cutter S202
Printers are machine sent from hell to torture us, refusing to print in black when 1 color is low. Cutting open a package which failed to tear open.
Especially Epsons. My Workforce WF-3820 bricked itself during a firmware update, and I couldn't fix it. Ended up just buying a cheap Canon all-in-one from Walmart.
Sam's Club has the tank printers on sale, but after my last experience, I'm skeptical of buying another.
-
Day 27: Well, nothing.
[attach id=0 msg=2510366]

-
@cody6268 said:
Especially Epsons. My Workforce WF-3820 bricked itself during a firmware update, and I couldn't fix it. Ended up just buying a cheap Canon all-in-one from Walmart.Sam's Club has the tank printers on sale, but after my last experience, I'm skeptical of buying another.
And if you try to unblock the print head it just uses like 1/8 of ink in a brand new ink. I tried to unblock the black and cyan last time, 2 attempts, and used all 5 color 1/4 totally.
That's just money down the drain.
-
Day 28
Another cigar cut, this time with the WorkPro. Nothing special. Just a cheap, hand rolled Nicaraguan, like the last one. Here in south Florida you can buy these basic, every day smokes in any gas station for about a buck and a half. Special occasion smokes are a bit pricier.

-
@kaevin said:
Printers are machine sent from hell to torture us....This is why our HP printer is blocked from talking back to the mother ship. I don't trust it.
<u>Day 28</u>
The EAB was busy today. First, I needed to cut up some carrots for our rabbit.

Then it needed to cut open a new package.....

-
Day 29
Can't believe the challenge is almost over.
My son demands to make a Christmas tree on the back from his holiday workbook
NT A-500RP, Olfa LTD-04 and SDI 0444C-K
Comparing them while cutting/tracing the outline of the christmas tree.
Ergonomics:
0444C comfortable.
A-500 excellent comfortable and stable.
LTD-04 the squarish edge is less comfortable.Blades:
0444C 30' pointy but less sharp than the other two.
A-500 NT 58' very sharp.
LTD04 Excell black 58' very sharpLocking strength
All are sufficientFlex of tips
None exhibit any flexI am not surprised I prefer A-500RP. Too bad didn't have the chance to try the 0.2mm blade.



Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
