ST 300 owners club
-
-
Talk about great shape :o great job tracking the old version CC down as well

What datecodes are in it
I think they only made them like that for 6 months or so :ahhh -
Thanks Poncho, Date codes are 1009, 1109. I truly lucked into this one.
JonesE
-
Awesome and thanks
Glad you lucked int it

-
Black oxide and cap crimper...

My black oxide ST300 is probably gonna need a bath in blue Dawn pretty soon.
-
@JonesE said:
Happy STS everyone. Pick up another B.O. ST300 CC this past week. Pretty much in stellar condition for a 15 year old tool. Did my standard cleaning with isopropyl alchohol. A quick lube do the pivots. The a quick sharpening of the plain edge blade. Now good as new and ready for some new adventures.Nice score !
-
Hi all,
I'm considering modding my Swisstool X by replacing its plier head with that from the ST 300 / Surge (did it before with the Spirit and the Rebar, which went reasonably well).
Now, before I buy the ST 300 plier head (or the whole MT), I'd like to know some important dimensions in order to know that the thing will actually fit in the Swisstool frame. I've found all the relevant dimensions except one: the thickness of the plier head. So my question: does someone know the thickness of the ST 300 plier head?
Based on some measurements taken of pictures, I've figured that it should be around 5/16" (8mm), but there is too big of an error in these.
Would be greatly appreciated.
Greetings,
Koen -
Is there anyone in the ST300 group who did a swap of the T-shank of the EOD version to the ST300M? Is it a one on one swap? I could be without the normal screwdriver in favour of the T-shank so I can use metal saws and larger wood saw.
-
Modded my spare BO ST300M today. Swapped in the Bosch T shank saw exchanger from and EOD model in for the Carbon Scrapper, and swapped in the an awl for the small flat driver. I think I will like this one much more now.
Sorry for the crappy pic. I am no photographer.
Was just asking about this mod, should have scrolled back! Is it an easy swap like taking out the old and inserting the new or does it need some more work? I got the ST300M, thinking about buying the EOD model and swapping it and then selling the EOD model again
This is the way.
-
All the tools will have the same pivot end

Thickness of tools and placement in the handle wpuld be the only thing that you will have to think about

Good luck with the mod and let us know what you end up doing

-
@Koen said:
Hi all,
I'm considering modding my Swisstool X by replacing its plier head with that from the ST 300 / Surge (did it before with the Spirit and the Rebar, which went reasonably well).
Now, before I buy the ST 300 plier head (or the whole MT), I'd like to know some important dimensions in order to know that the thing will actually fit in the Swisstool frame. I've found all the relevant dimensions except one: the thickness of the plier head. So my question: does someone know the thickness of the ST 300 plier head?
Based on some measurements taken of pictures, I've figured that it should be around 5/16" (8mm), but there is too big of an error in these.
Would be greatly appreciated.
Greetings,
KoenThe plier head of both are very close in thickness to each other

Sorry for the late reply

-
I'd love to see the pics! That sounds like a great idea.
@Koen said:
Hi all,
I'm considering modding my Swisstool X by replacing its plier head with that from the ST 300 / Surge (did it before with the Spirit and the Rebar, which went reasonably well).
Now, before I buy the ST 300 plier head (or the whole MT), I'd like to know some important dimensions in order to know that the thing will actually fit in the Swisstool frame. I've found all the relevant dimensions except one: the thickness of the plier head. So my question: does someone know the thickness of the ST 300 plier head?
Based on some measurements taken of pictures, I've figured that it should be around 5/16" (8mm), but there is too big of an error in these.
Would be greatly appreciated.
Greetings,
Koen -
@Desmodromic said:
Is there anyone in the ST300 group who did a swap of the T-shank of the EOD version to the ST300M? Is it a one on one swap? I could be without the normal screwdriver in favour of the T-shank so I can use metal saws and larger wood saw.Hi Desmodromic, I just saw your post in which you referenced an ST300M I modded a year or so ago. Yes, the mod is relatively straight forward. I removed the carbon scraper/awl and the small flat driver and swapped in the t-shank adapter and awl from the EOD version. To make your life easier, get a Pivot Tool for a Benchmade Knife this makes aligning all of the washers, shims, and tools so much easier. Also don’t forget to get the wrenches for the Leatherman Pivot Bolts. My first mod on a Rebar, I used vise grips to remove the pivot bolts and instantly regretted it.
JonesE
-
The knurled screw wrenches make modding so much easier :ahhh They are definitely worth buying for even one mod but once you get them you can also use them to loosen and tighten the pivots of all LM tools that have them to whatever tension works best for you 8) 
-
@JonesE said:
Hi Desmodromic, I just saw your post in which you referenced an ST300M I modded a year or so ago. Yes, the mod is relatively straight forward. I removed the carbon scraper/awl and the small flat driver and swapped in the t-shank adapter and awl from the EOD version. To make your life easier, get a Pivot Tool for a Benchmade Knife this makes aligning all of the washers, shims, and tools so much easier. Also don’t forget to get the wrenches for the Leatherman Pivot Bolts. My first mod on a Rebar, I used vise grips to remove the pivot bolts and instantly regretted it.JonesE
Thanks for your reply Jones, really appreciate it. I just saw a nice second hand (returned) EOD version on Amazon for €80 so I will get that to salvage the parts. Will also take your advice as to get some of those wrenches.
Ben
-
now i want my ST300 back to whole, since i broked my ST300 awl in summer i dissambled it. i cannot send it to warranty anymore since its in pieces and screws are modded they wont repair it anymore (sended email to warranty and they said they wont fix it). Now my only option is to buy new awl to it and assemble it.
-
Best of luck Antti in finding a replacement awl. I just looked through my parts stash and I don’t have a spare awl otherwise I would have sent you one.
JonesE
-
After years of on and off lurking I'm finally cool enough to join the club 8)
Scored an absolute pristine condition black cap crimper ST300 last week. I don't think it was ever used other than being removed from the box; the pliers were still factory stiff and the blades are flawless and razor sharp! Just gave it a wipe with a thin layer of oil and it's good to go.



My plan with it was to disassemble it and combine it with parts from a 300M and an EOD. I do want the cap crimper functionality on it but don't want to sacrifice the regular plier jaws like the EOD does so this would have been ideal.
However, since it's in such a good condition and the plier head is out of production, I don't think I'll have the heart to destroy it and I'll have to go back to my initial plan of combining just an EOD and a 300M. :P -
@Skivvy Roll said:
After years of on and off lurking I'm finally cool enough to join the club 8)Scored an absolute pristine condition black cap crimper ST300 last week. I don't think it was ever used other than being removed from the box; the pliers were still factory stiff and the blades are flawless and razor sharp! Just gave it a wipe with a thin layer of oil and it's good to go.



My plan with it was to disassemble it and combine it with parts from a 300M and an EOD. I do want the cap crimper functionality on it but don't want to sacrifice the regular plier jaws like the EOD does so this would have been ideal.
However, since it's in such a good condition and the plier head is out of production, I don't think I'll have the heart to destroy it and I'll have to go back to my initial plan of combining just an EOD and a 300M. :PGood plan, these are relatively rare.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


