Sad SAK Saturday
-
@Juan el Boricua said:
Thundah, perhaps using wet or dry sandpaper you may? I've done some, and has had "respectable" results going from 600, 1000, 1500, 2000, and a final polish with a metal polishing cream( in my case, Blue Magic Metal Polishing Cream); I also use a solution of dishwashing liquid and water for lubricant, and to prevent the paper from clogging.
Here's my most "extreme case", an Explorer whose blades were gouged; I try to pick the gouge's remnants in the pictures. [attach id=0 msg=2500238] [attach id=1 msg=2500238]Thank you for the tip, Juan. Very impressive polishing work you have done there!
-
@Juan el Boricua said:
Thundah, perhaps using wet or dry sandpaper you may? I've done some, and has had "respectable" results going from 600, 1000, 1500, 2000, and a final polish with a metal polishing cream( in my case, Blue Magic Metal Polishing Cream); I also use a solution of dishwashing liquid and water for lubricant, and to prevent the paper from clogging.
Here's my most "extreme case", an Explorer whose blades were gouged; I try to pick the gouge's remnants in the pictures. [attach id=0 msg=2500238] [attach id=1 msg=2500238] -
Sad Wenger rode along in my coat pocket today. This is it along with my usual walking stick/pole cutter/unfriendly critter whacker. The Wenger did a good job of not cutting this deadfall. Best wishes. Gary
;) [attach id=0 msg=2509345]
-
I assume the deadfall was handled with a chainsaw?
-
Yes. I do some stuff myself, but anymore I just hire it out. Especially the bigger stuff. I bought the pole cutter at a flea market for $2 a number of years ago. It has been sharpened quite a few times, and the rope has been replaced by me once. I have a saw that will fit it, but it makes it more unhandy to use. It actually makes quite a good walking staff, and the hook is handy to fish out trash from ditches or to pull down branches. I use it year-round. Best wishes. Gary
;) -
This thread has just joined the SAK Clubs stickie

/topic/71172
-
Thanks, H-Man. Best wishes. G

-
Just a couple of sad SDs. The need some polishing up, oiling, sharpening, and some fresh scales. I'm debating if I should use them for spare parts or bring them back to life.

-
You know, those things wouldn't look half bad with some leather glued to them. Might even let the brass rivets show through after you polish them up some. Make a really comfortable neck carry Classic. Best wishes. G

-
Bring 'em back to life!

-
-
I'm sure you could come up with something better than me. I was thinking about using a single piece of thicker leather for a scale. Something like you might use for a dog collar. Naturally you can skive down to any thickness. So the leather would lie flat, was where I came up with the idea of punching holes in the leather to let the brass rivets show. Something like contact cement to bond. The up side could be stamped with a basketweave tool and dyed of course. Could look okay. Could look tacky. Depends on the skill of the worker and maybe some luck.
Talking of wrapping a beat up or broken scale, I have seen labels like a beer bottle or candy wrapper type glued on to regular scales. It can look really good. Those types of labels aren't thick, so there wouldn't be any need to sand the old scales down much, if at all. Best wishes. G

PS I saw an old Camco Kamp king type knife with leather handles glued on. It wasn't pretty, but worked okay. The workman who did it wasn't very good. I personally had a Western Boy Scout fixed blade that had leather slab handles. It had a full tang, so these weren't the stacked washer type. It actually was quite functional. I must have been crazy to let it go. G
-


This poor guy is from a grab bag of knives I recently purchased. The pen blade has been over sharpened on a grinder. The large blade has been expertly sharpened to the point it is as sharp as the spine. I'm going to attempt reviving it.My attempt at the Crock Sticks didn't work. The angle is off on the "edge".
Sadly it is a late 1980's Tinker that's otherwise in good shape.

-
Looks like that one has a lot of potential. Could be you will end up with a very nice old Tinker. Be sure to let us know how it turns out. Best wishes. G

-
Here's my Sad SAK entry for today, a Cyclist. Well, maybe half as sad. But there's still some sadness there.

-
I like the mini alligator wrench. If you ever need to adjust an alligator, you should be good. Sad? Yeah, duct tape wouldn't do much for that one. It's a shame how Wenger's new owners just left everyone out in the cold on replacement scales. They could have made lots of easy money by stockpiling some. Best wishes. G

-
Any source for Wenger parts? I don't need any just yet... -
@IMR4198 said:
I like the mini alligator wrench. If you ever need to adjust an alligator, you should be good. Sad? Yeah, duct tape wouldn't do much for that one. It's a shame how Wenger's new owners just left everyone out in the cold on replacement scales. They could have made lots of easy money by stockpiling some. Best wishes. G

That's true, and exactly why I rarely carry my Wenger. ... Toothpick and tweezers also. I wish Victorinox would have left Wenger alone, or at least not discontinued the 85mm line.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

