The December 2024 Utility Knife Challenge
-
Day 29
Roxon S501U with utility blade.

-
-
Day 29
No use for the Green Beast today.

-
@BPRoberts: awlways good to see Pumpkin!

@LoopCutter: unless it's a style I don't care for, I wouldn't turn down a new pair of Carharrts!

@cody6268: when I was obsessively collecting Hot Wheels, I referred to late December and January as the "toy doldrums." Amazingly, I found what seems to be a very recently released Lego set at Meijer today.
@Alan K: cheap or not, I bet it was a good smoke!
@AzteCypher @kaevin: no doubt your efforts were appreciated!
@ReamerPunch @JonesE: lookin' pretty good!
Day 29
I found another bus transfer in a sweatshirt that is now disused (and I can't bear to cut it up into rags). This presented the last opportunity for Stanley vs. DeWalt blade testing. Both did equally well. The conclusion: DeWalt blades work slightly better for my needs, but Stanley are still worth keeping around.
[attach id=0 msg=2510490]
Utility knife record: 22-1.
Stanley record: 3-4-4.
DeWalt record: 4-3-4.Spoiler:
Tomorrow y'awl shall see two utility knives that have heretofore been unseen. And we should hopefully have a badge approved soon. Just please do not get me started on printers.
-
Day 29
With the interior Christmas decorations taken care of yesterday, my plan was to take down the exterior lights today. Well, it has been raining all day here so that didn’t go as planned. So, I switched focus and started filling nail holes and patching some drywall in the hallway and living room. My wife and I had talked about starting this project after the holidays, but I guess now is as good of time as ever.
JonesE
-
@cody6268 Sorry I missed your comment the day before about the Klein 32611P pocket screwdriver. I agree that it is very useful. I am presently surprised by how good it is. For, $15.00 it has been the best tool purchase of 2024 for me. The onboard bit storage with reversible bits, the pickup magnet in the removable bit shank, and its compact size make this an easy edc carry in a shirt pocket.
I haven’t tried the Snap-on pocket prybars, but I do have the Snap-on pocket screwdriver with the slotted shank. I also have the shader valve remover and spark plug gappier. Although, I haven’t used either of those last two in the past decade.
Picture for size comparisons.
-
<u>Day 29</u>
The Valet Auto Strop Razor utility knife cleaned up very well. I managed to clean up the old blade as well but it does have some light pitting. Going to try and see how well I can sharpen the blade. It would make a good key chain or neck carry.




-
Nice job AC on the clean up and polish on the razor knife.

-
Day 29
Visited the museum at the old Bethlehem Steel complex. I wonder how many of us have knives made from steel made there.
[attach id=0 msg=2510524]
Gift shop had some pens that might be of interest this month.
[attach id=1 msg=2510524]


-
Day 28; fingernail duty.
The "tape piercer" makes a really good nail cleaner.
[attach id=0 msg=2510539]
Also was surprised to find the fairly recent Matchbox Working Rigs crane at Walmart today, hidden amongst the umpteen spray rigs no one buys.
[attach id=1 msg=2510539]


-
Day 29
[attach id=0 msg=2510540]
My strep for the month.

-
Day 30
More bottle recycling duty

-
Day 30
Changing of the guard.
This utility knife will be returned to the kit.My SAK and Stockman will resume pocket duty.
[attach id=0 msg=2510582]
My other utility knife has been returned to it tool bag and the Gerber pry will find a new home in junk drawer in the kitchen to scrape lottery tickets requiring such action.
Interesting challenge, the thirty days seemed to take longer, maybe because I did not have to much time spent pondering which implement was getting duty.
Congratulations to awl who completed. And, to Dan for hosting. Excellent job.

-
Day 30
Continued removing pictures and paintings from the walls of the living room, dining room, and hallway. Did more filling and sanding of the repairs I did yesterday. I really do not like drywall dust. I really like how fresh and clean a room looks after new primer and paint. I guess I struggle with the journey from one stage to another. I am going to let the dust from this morning’s sanding settle and do one more cleaning before I start in on priming the ceiling and walls this afternoon.
I just wanted to say thank you Dan for hosting the challenge this month. Using the Stanley brought back fond memories of my Dad and Grandpa and made me appreciate the time I got to spend with them. I also wanted to say thank you to all who join in the challenge. It was fun seeing what everyone got up to this past month. I especially enjoyed learning about all of the different type of utility knives you all used. I also wanted to say to thank to Kaevin for his detailed posts on the many different snap blade utility knives. I really am not familiar with this type of knife, so I found it interesting learning the differences between the many different ones he posted.
Thank you awl and I wish you a Happy New Year!
-
<u>Day 30</u>
Finally putting the Valet Auto Strop to good use by opening up a pack of Field Books.

Thanks to Dan for hosting this challenge. It was fun seeing all the different choices of utility knives out there. I never would've learned about the Valet Auto Strop if it wasn't for this challenge.
Cheers!

-
@JonesE: considering your location, I'm completely unsurprised that it rained all day.
@AzteCypher: that Valet Auto Strop is pretty cool!
@BPRoberts: that would be a neat place to visit!
@cody6268: "peg-warmers" are something else I remember well from my die-cast collecting days.
@kaevin: I have a few bottles and a lot of cans that should be turned in for refund...
@LoopCutter: great bones on that Stockman! I assume it's a 75?
And now it's time for some final thoughts on the utility knives. They are less than ideal for kitchen duty, but they handled every other task I threw at them quite well. Being able to change blades to better suit the task at hand, or when they get dull, is a great bonus. This challenge was a hell of a lot of fun. I'm pleased to have hosted it and honored to have had such a great group of fellow challengers!

And just a quick update: the badge hasn't gotten the green light as of this post. Hopefully soon. I still have plans to do a giveaway for those who earn a badge, but again, that's contingent upon my being able to procure the intended prize.
Now to briefly switch to the phone used for photography and post the day 30 photo.
-
Day 30
Here are two that waited until today to show themselves. If memory serves me correctly, I bought the Champion Quality Tools job not long after relocating to Michigan. It's seen quite a lot of use, and the screw at the top of the blade slot has to be tightened periodically. The bright green Stanley is a more recent addition that sat neglected for a while. It got a dose of spray disinfectant before the photo was taken. Bith of these live in my "home tools" box and could use new blades.

[attach id=0 msg=2510620]
The final tally...
Utility knife record: 22-1.
Stanley record: 3-4-4.
DeWalt record: 4-3-4.
-
Day 31
NT cutter AR30D-WB
[attach id=0 msg=2510623]
In packageYes I just remembered it is a 30 day challenge, but December has 31 days. So here is an extra entry and I promise it is the last cutter I buy, in 2024.
This is one of the 3 colors of their 30 degree with color body A sized cutter from NT cutter released in June 2024. Stone grey SG, Leavy green LG and Wood beige WB. Features a plastic shell over the stainless steel rail. Fill mount is possible and it is designed to be easy to hold on both left or right hands.
[attach id=1 msg=2510623]
Front[attach id=2 msg=2510623]
Back[attach id=3 msg=2510623]
Blade out



-
Day 30
Here we are on the last day. Thanks to Dan for hosting and to all who participated, whether they completed or not. I enjoyed seeing everyone's selected utility knives being used for various tasks. I liked carrying a utility knife as they were more than up to most of my daily cutting needs. A lot of my cutting needs involves puttering around in the yard and I found that the utility knives don't work on palm fronds and can't trim the hedges, but they did suffice at opening bags of soil and mulch. Today I used the WorkPro to open an insulated pack from the pharmacy containing refrigerated meds.The black, no name cutter is a solid EDC that is very capable and comfortable to use. The WorkPro was my favorite utility knife for pocket carry because it is so light that it was barely noticeable in my pocket. The Stanley would be my first choice for heavy duty use such as cutting up carpeting which I didn't need to do during the challenge, but I have used it for that purpose before. The flat sliding box cutter slips easily in a shirt pocket and would be my first choice for office use if I had to open packages all day.


-
Continue
[attach id=3 msg=2510625]
[attach id=2 msg=2510625]
Top and bottom with anti slip design near to the tip[attach id=0 msg=2510625]
Front of parts[attach id=1 msg=2510625]
Back of partsThis cutter is a bit polygon/squarish. Sets it apart from the more streamlined designs like A300, A500. Comparing to the A1000 its outline is still very hard and straight. It's almost like NT speaking in Olfa language. And it's very light given it's plastic shell. If there is something embossed on the back, it will look better, like the lines on the back of A300 or just the brand name and model number.
Somehow I think the slider may fit the STL-ONE and alike.
It have been hard to choose between this and the PMGA-EVO2 (an all black A300GRP with 30 degree black blade). But lastly I decided to get this as this is another body shape and design. The muted tones of all 3 colorway are pleasant as well and posed a hard decision to choose 1 out of three.




Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



