The December 2024 Utility Knife Challenge
-
Thanks for the badge RP!

-
Thank you ReamerPunch!
JonesE
-
-
-
@Alan K: I can't recall when I last saw a palm tree.

@kaevin: you have quite the collection of cutters! :o Glad you enjoyed the challenge.
@LoopCutter: Case sure does a nice job with their bone!

@cody6268: Wenger can openers are awesome!

@BPRoberts: good to see the little Prybrid surprised you in a good way!

@ReamerPunch: thank you again for the badge, and I think all nine who completed the challenge have been awarded!

@AzteCypher: I sure do like CornNuts!

Based on the list in this post, here are those who completed the challenge and aren't me. This is the order in which everyone signed up, and the numbers will be used to determine the winner.
- Alan K.
- AzteCypher
- LoopCutter
- ReamerPunch
- kaevin
- JonesE
- cody6268
- BPRoberts
Now to pick the winner and add a couple of photos!
-
And here we go...
[attach id=0 msg=2510828]
Cody6268 is our winner! Cody, I'm not sure if I have your address, so please PM it to me just in case. I'll get your Gerber EAB Topos on the way as soon as humanly possible. (I have to work on Saturday, so I'll do my very best to make it happen on Thursday or Friday.)
And now for those new photos...
Day 31
Inspired by JonesE, I purchased this today.
[attach id=1 msg=2510828]
It's a Milwaukee Fastback, bearing the number 48-22-1501. The metal handle gives it a nice heft, and the blade opens and locks into place easily...just a push of the button and a roll of my wrist. I suspect some adjustment may be needed, as blade retention isn't as secure as I'd like. The cord cutter notch likely would have worked better if it wasn't so close to the blade tip. And I haven't figured out how works the scoring assist (not that I have much use for such a thing). So far, it's acquitting itself nicely.
[attach id=2 msg=2510828]
Thanks again to everyone for making this such a terrific challenge!


.jpg)
.jpg)
-
Congratulations Cody!

Thanks for the give away and for hosting, Farmer X! This was tremendous fun!
-
Day 30:
Spent the day on Flight Simulator: 2020 and some model train repair (more on that during the Buck challenge--I'll have to go by a new hobby shop to get some parts before I keep going). Had the Coast and Knipex for the train stuff, ancient Magellan GPS unit (for pulling up some saved coordinates) and Xbox controller on my desk.
I honestly found little a utility knife couldn't do, and I love the ability to swap out chipped blades instead of spending half a day repairing damage. I'm glad Farmer X hosted this challenge, as most of mine spend their days in toolboxes or as second potato--not my normal cutting tool (which as of late, is becoming more and more towards fixed blades around the farm). I'm surprised at how well they performed. The thin blades cut much better than a thicker pocketknife blade. Plus, I'm not afraid to scrape, or cut things that might quickly dull a regular blade.
So far:
Stanley. One of my favorites. Light, thin, and rugged. Easy to unlock as well. While the blades are hard to find (only a small farm supply sells them), they sharpen up well.
Valet. For light use, you can't go wrong. Weighs effectively zilch, is paper thin, and takes single-edge razor blades (need to order some without the reinforcement). That being said, the near-century old carbon steel blade in it still holds an excellent edge.
Klein. My work knife these days, and the one I often use the most due to the screwdriver. It is heavy, though.
Coast--pretty lightweight, but flimsy compared to the EAB.
EAB. Carried one for years. Personally, it's my recommendation for a first utility knife. Since my current one is still MIA, I'm grateful Farmer X has given me one of his.
Olfas.A little long for pocket carry, but light and very well made. I'm going to try a solid blade (non-snap off) in the larger one, as it's very easy to use one-handed. Thus, I can use it as a regular retractable blade knife.
[attach id=0 msg=2510849]

-
@ReamerPunch said:
Posted on December 31.
Nice one! :D
I enjoyed all the different models you posted.
I think I'll look into NT. I've been getting lots of Japanese tools from Amazon JP so I'll see what NT tools I can get.Speaking of NT
Discovered this a while back, it is interesting.[attach id=0 msg=2510864]
[attach id=1 msg=2510864]
RES-1200GP I think it is discontinued. More like a seat belt cutter and glass breaker with extra cutter function. I don't have a car to throw one into so, I will pass this one.Japanese also have a "middle size" between the light duty A size and L large size, they call it middle size H. And there is an extra large size as well. H and XL blades are hard to come by though.


-
Thanks Jones, Fx and RP. I'm glad that you enjoyed my posts.
Here the snap off ones are the major, and trapezoid utility blades are minority.
Thanks to you guys I've learnt about the Valet Auto Strop, Olfa CTN-1 (and get one myself) and also the Stanley 10-049 and many more.
-
Congrats everyone for badge, this was great to see so many diffrent utility knife in use.
-
Happy New Year everyone and congratulations to Cody!

-
Congrats Cody and thanks RP!
-
Congrats Cody!
-
Congrats Cody.
-
Thanks for joining and I enjoyed your pictures and thorough overviews. For snap-off, only have two Olfas, and a Tajima, and my no name cheap stuff. I'll look around and get more brands. And more Olfa.

-
I can definitely see myself picking up an Olfa, too. And I'm kinda hoping RP didn't drag me into the Engineer Rabbit Hole. :D
-
I'm just posting my stuff...

In all seriousness, thePZ-57 tiny one with black handles is just great. Ergonomics, gripping strength, design. It's something that you won't use all the time, but once you need it, you really need it.
I'm not saying go buy one. I am saying that Amazon Japan has amazing prices. The PZ-22, the cheapest Engineer screw plier, is down at $6 US. And they have a massive stock of Engineer things that I have not seen in Amazon US or Aus. And PB Swiss, SK11, Anex, Vessel, Tone, Wera, it's crazy. And two options for shipping: regular, and DHL expedited. My 4 orders have taken 4-5 days from ordering, to my door.
The PZ-58, the most popular model, was $30 USD a year ago. I got it at $22, a couple weeks ago I saw it at $17. I've seen all of them drop in price. That's why I got almost all Engineer standard models.
But I'm not saying go buy one. Definitely don't go buy one. ::)
-
Seriously, if you are curious and want one just to have, go and watch some reviews on the different models. Last Best Tool has some nice reviews on most models.
If you see Vampliers reviews, Engineer is the OEM and they make the same models under their own brand, so if you want a Vamplier, Engineer will have the same exact tool for around 2/3 the price, probably lower.
-
Finally got to use the cigar cutter on the Valet Auto Strop. It did a decent job but I need to work on my technique for next time.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
And I ain't done yet...a little bonus will be posted not long after I get home. 