Gerber Mr. Pinchy Multi Plier Club
-
@gregozedobe said:
But don't be fooled, even with a spring those scissors are pretty useless... later on when Fiskars got involved the Gerber scissors were vastly improved.it will be right , but i will prefer to fix that even if i never use it , just to have a good condition tool . i have too a mp600 diesel with the fiskars scissors on it and a mp400, it's a very smaller scissors , but it does the job
any idea where to find the parts ?
-
Might have to try and modify a Victorinox spring. Going to be hard to find an original spring, probably. Best wishes. G
:( -
you're probably right about the spring , i will try to order spring from victorinox and try to adapt
here my fiskars



-

As for the new spring, maybe try U.S. eBay? I'm sure a suitable donor Gerber would show up sooner or later. And there are always work-arounds if a seller will not ship outside the U.S. ;)
-
Welcome aboard! You have some great Gerbers!
-
Nice combo buddy!
-
Thanks Barry !

-
Great pic buddy! We got some snow here last night too.
-
Thanks buddy !

-
I got my first Mr. Pinchy a few days ago. I think it is a very cool looking vintage multitool. Seems to be unused, too. But I am wondering if it is common that the handles stand crookedly to each other?
[attach id=0 msg=2524857]
-
Hi all! Finally I've found old MP (I think it's 2 gen?) . it's old good tool from times when Gerber have awl and wire stripper. But I have problem with pliers. Central screw every time try to tighten when open an close pliers. I've loosen it but it tighten again. What can I do?
Thanks :) -
[attach id=0 msg=2532303] [attach id=1 msg=2532303]


-
Hi Andrew97, I would use blue loctite threadlocker on the threads of the pivot screw. Make sure the threads are clean, apply a bit of thread locker to the pivot screw and thread the pivot together and set the desired tension in the jaw. The key here is once you have set the pivot tension, let the threadlocker cure over night. Then reinstall it plierjaw back in your tool. I use this method to set the pivot tension on many of my knives. Good luck and please report back if this worked for you.
JonesE
-
Hello JonesE, thank you, will try it and make report about results. What i can say now it's awesome tool like old Schrade ST or Bear & Son not EDC toy but good working tool.
-
And it's me again:) Threadlocker works well, problems solved thank you again!
-
Hi Andrew97, So happy it worked for you. I appreciate you letting us know. Hopefully, this will be of assistance to others in the future if they have the same issue. I don’t know if anyone said this but welcome to the forum. It is great to have you here.
JonesE
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


