Alox forever!
-
Gleaming edge!

-
Beautiful knife!

-
Nice looking farmer!
I see these go on eBay for anywhere from $50 (rarely this low these days) to around $100, maybe a bit higher.
It’s hard to pin down a date on these exactly, the brass liners indicate it’s likely pre-1985. I’d assume it has the small-“v” Victorinox logo.
Regardless of exact age or value, it’s a fine, solid pocket knife

-
@gustophersmob said:
Nice looking farmer!I see these go on eBay for anywhere from $50 (rarely this low these days) to around $100, maybe a bit higher.
It’s hard to pin down a date on these exactly, the brass liners indicate it’s likely pre-1985. I’d assume it has the small-“v” Victorinox logo.
Regardless of exact age or value, it’s a fine, solid pocket knife

Yes it has the small victorinox stamp on the tang. The reverse of the main blade is blank indicating it was made from late 73 to early 76. Thank you for a value update I'll need to find maybe one more like this for a family member. I've had alot of SAK in my day some rare ones some spendy ones, but after experiencing this Alox....there's just no going back to a celidor model regardless of what tools they have.

-
The blank reverse is only useful for dating the cellidor or officer knives. The alox knives with a victorinox front stamp have a blank reverse. The exceptions are soldier knives which have a date stamp on the reverse (or other 93mm alox with leftover soldier blades) or knives with an Elinox or Fischer tang stamp which have the 4 line VSSR stamp on the reverse tang.
Hope that makes sense.
-
@gustophersmob said:
The blank reverse is only useful for dating the cellidor or officer knives. The alox knives with a victorinox front stamp have a blank reverse. The exceptions are soldier knives which have a date stamp on the reverse (or other 93mm alox with leftover soldier blades) or knives with an Elinox or Fischer tang stamp which have the 4 line VSSR stamp on the reverse tang.Hope that makes sense.
Ahh that is invaluable knowledge good sir thank you! I'm glad I found this place now I need to spend 3 months reading this thread lol.

-
Here’s my only current old cross. A pioneer with an 85 dated blade.


-
@gustophersmob said:
Here’s my only current old cross. A pioneer with an 85 dated blade.Wow It's in great condition! I absolutely love it thank you soo much for sharing that beauty! Very interesting how some were dated and some weren't I've got soo much to learn on alox still, and it's been a blast so far!
-
Welcome to the forum 69Camaro - Great intro
Seems like you like Alox! So do we !! ;) ;) ;)
-
@gustophersmob said:
I don't think you can upload videos or gifs direct to MTO. You have to host it somewhere else like photobucket or Imgur and link to it.Yah i remembered back from my img host days and realized it needs to be hosted will do some work on it soon.
Edit: kinda cool pic tho haha -
@gustophersmob said:
The blank reverse is only useful for dating the cellidor or officer knives. The alox knives with a victorinox front stamp have a blank reverse. The exceptions are soldier knives which have a date stamp on the reverse (or other 93mm alox with leftover soldier blades) or knives with an Elinox or Fischer tang stamp which have the 4 line VSSR stamp on the reverse tang.Hope that makes sense.
After doing some thinking I realize the 1973 date i put on the F.A. was not correct after hearing what you said. With that being said can you guys help me determine the date of this farmer. Let me know if you need any other pictures to help get a year of manufacture. If it's just not possible I would understand.
-
@69Camaro said:
After doing some thinking I realize the 1973 date i put on the F.A. was not correct after hearing what you said. With that being said can you guys help me determine the date of this farmer. Let me know if you need any other pictures to help get a year of manufacture. If it's just not possible I would understand.I do t think it’s possible to get an exact date, the best you can do is a range. Part of the challenge, too, is that for every change there is a date range where it is phased in, meaning you can see knives with “older” features after the introduction of new ones. Plus, the changes for the 91mm cellidor line (which are pretty well documented) don’t always transfer well to the 93mm alox line.
Here are the relevant clues, as far as I know:
- can opener loses “+ pat” mark around 1970.
- bottle opener loses scraper grind around mid-1970’s
- little “v” VSSR tang stamp through 1985
- Around 1980 on the cellidor models, the saw back spring gained a little bump where the saw tip rests. Idk if this changed on the 93mm alox line.
- brass liners start to disappear around 1985.
Based on this, your knife could be anywhere from the early 60’s when they switched to the current style awl to around 1985. My guess, based on the tool finish and shape of the squares on the scales, is that this isles likely from the 80’s, though that’s not 100% dispositive.
-
I agree on @Gustophersmob 's analysis for dating this knife. It's a lovely knife, and you should feel privileged to have it.
It's obviously personal preference, but I think these do much better with a keyring and Vx nylon fob/lanyard. The chain you have on the knife could damage the Alox scales, and could also damage the blade if it fouls on it while closing.
If the original keyring was trashed, you can replace it with a Vx original replacement part and not affect the knife's value or function.
Congratulations on this fine OC Farmer!
-
@gustophersmob said:
I do t think it’s possible to get an exact date, the best you can do is a range. Part of the challenge, too, is that for every change there is a date range where it is phased in, meaning you can see knives with “older” features after the introduction of new ones. Plus, the changes for the 91mm cellidor line (which are pretty well documented) don’t always transfer well to the 93mm alox line.Here are the relevant clues, as far as I know:
- can opener loses “+ pat” mark around 1970.
- bottle opener loses scraper grind around mid-1970’s
- little “v” VSSR tang stamp through 1985
- Around 1980 on the cellidor models, the saw back spring gained a little bump where the saw tip rests. Idk if this changed on the 93mm alox line.
- brass liners start to disappear around 1985.
Based on this, your knife could be anywhere from the early 60’s when they switched to the current style awl to around 1985. My guess, based on the tool finish and shape of the squares on the scales, is that this isles likely from the 80’s, though that’s not 100% dispositive.
I just realized how I wrote this was a little messed up.
I intended that the switch to the “new” style awl happened in the early 60’s part be another point in the list and then to say in the last paragraph that based on all those items yours is from the mid-70’s to about 1985. My guess is in the 80’s.
-
Now that i have the Minichamp ALOX, how about an Look on my Entire ALOX Collection?
It’s the Minichamp, i got today, the Pioneer X ALOX Limited from 2024 and also an Limited Edition on the Hunter ALOX which is actually a nice big Knife: i though back then it where smaller when i bought it online ..
-
Loving my 64 Soldier that I carry daily. It’s my beater and gets used

-
Love to see the old stuff get used.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

