SAKs & Coffee
-
The Hydra is one cool blade! Not sure about Microtech making office knives though. After all, Mr Wick used a CT ;)
Sent from my iPhone using Tapatalk
-
@old Lefty said:
The Hydra is one cool blade! Not sure about Microtech making office knives though. After all, Mr Wick used a CT ;)Sent from my iPhone using Tapatalk
It's very true what made Microtech famous, was the fact it was seen in John Wick. The Troodon and Ultratech used in the films were high end expensive non fantasy military tactile knives. Most of Microtechs line up would fall into this category save the Halo 5 and 6 which imo are fantasy style military tactical knives. Other than that though these are expensive pieces usually meant for high end clientele. That being said lots of regular Joe's like me carry them, beat the heck out of them, use them every day sort of thing. Tony had more of a military mindset coming strait from the armed services to make knives. His son probably grew up playing halo and watching movies like Doom this had an effect on his knife making ability I feel. So the designs are worlds apart. They was I looked at it was, I could walk into a office interview and if I had a all black ultratech in my pocket it wouldn't garner any attention it would just look like a pen. If I had my red hydra with high vis lanyard sticking out of my pocket people are going to start to ask questions in that environment. That kinda where I was going with it.
He wore a business suit and tie lol, not dressed in casual. Even though yes it was a bulletproof suit, it was a suit. -
@AzteCypher said:
Wow! Very cool. Never heard of them until now.That's right on, there's alot to learn about them and they are great knives just like any good ol SAK
-
^^
Thanks for the explanation! Granted my experience on Microtechs don’t go further than owning a CT.
Also, the show of pocket clip had not entered my mind but makes sense.
Maybe its just me, but I don’t clip my knives but rather carry them in front trouser or jacket’s pen/cigar holder pocket.
I even go as far as remove them when feasible. A good example would be Spydies Vallotton sub-hilt, removing the clip improved the looks appr. 1911 times :)Sent from my iPhone using Tapatalk
-
@old Lefty said:
^^
Thanks for the explanation! Granted my experience on Microtechs don’t go further than owning a CT.
Also, the show of pocket clip had not entered my mind but makes sense.
Maybe its just me, but I don’t clip my knives but rather carry them in front trouser or jacket’s pen/cigar holder pocket.
I even go as far as remove them when feasible. A good example would be Spydies Vallotton sub-hilt, removing the clip improved the looks appr. 1911 times :)Sent from my iPhone using Tapatalk
Yes glad I could elaborate on what I was trying to go for lol. Now I'm on a mission I've got get a few knives sharpened this morning. There's my version of a Johnny knife in this photo. Enjoy! Best of wishes Cam.

-
Real coffee today. I think. Folgers from a little plastic tube. Handy to carry. Black Bijou. Best wishes. [attach id=0 msg=2514430]

-
I love that coffee Gary! I usually keep a box around for when I want a fast cup. When I was in the Army, we used to get packets of Taster's Choice in the MRE's. I don't think I've ever had a better cup than one of those after being out in the field for a couple of weeks.
-
You know Barry, I heard the definition of an outdoorsman was someone who would complain about the coffee that his wife made at home. Then he would boil up coffee with creek water in a rusty can, filter it through an old red bandana and say it was gooooood. Best wishes. G

-
Sounds about right Gary! I gotta say my wife breaks the mold. Mrs. R can brew up a great pot of coffee ☕☕
-
The Taster's Choice MRE coffee was kinda hit-and-miss. I think those I had access to came with standard Type I or Type III. More recent ones have Bill's Brew.
-
Coffee is brewing. I found a bunch of K-cups for the nice handy Keurig coffee maker. That I don't have. Used Wenger to cut open a K-cup. The blade sharpened up nicely with just a few strokes on a medium Arkansas. I said I would try the combo tool on a can. The thing doesn't have a sharpened edge. I wouldn't categorically state that the combo wouldn't work on ANY can, but it wouldn't work on the one I used as a test subject. Not sharp enough to pierce the can lid. I hooked it on and pulled hard as I dared. Just a little dent. Any harder could have led to a catestrophic chassis failure scenario. Didn't want that since I like the knife. Probably would open a bottle okay. Best wishes. G
[attach id=0 msg=2514789] [attach id=1 msg=2514789]

-
Good morning Gary! It's cold enough for a couple of cups here. We got down to -6 after I took a pic at -3. Love that Wenger! ☕☕
-
Morning fellas! We were at -11° F last night when I went to bed and now up to 30°F now with the Chinook winds. I'm not sure which is worse, the frigid temps or the wind. At least some of this ice should melt today. It's a big cup kind of morning, just like every other morning [emoji1787]

Sent from my SM-S908U using Tapatalk
-
🥶🥶🥶 We don't have the winds here but I'll be glad to see Spring! Great pic!
-
Only got down to 10F here. I feel like a piker. I like that big green Stanley mug. Probably made a mistake when I didn't take friend MTSAK up on his kind offer of a Buck knife loan for that challenge. Everyone seems to be having fun. Good to hear MTSAK and Barry are amongst the living.
Be that as it may, I failed to mention the coffee brand used this morning. K-cup says this is Donut Shop coffee. Great Value (Wmart) brand. It is good. I can get about 2 cups of the desired concentration from one K-cup. I think of K-cup as being a short form of Kowboy Koffee. I might still have an antique percolator out in a storage building? I did have a modern plastic one, but it could have gotten tossed. So, it's boiled water in a small pot filtered through a paper towel for me. Best wishes. G

-
@IMR4198 said:
Only got down to 10F here. I feel like a piker. I like that big green Stanley mug. Probably made a mistake when I didn't take friend MTSAK up on his kind offer of a Buck knife loan for that challenge. Everyone seems to be having fun. Good to hear MTSAK and Barry are amongst the living.
Be that as it may, I failed to mention the coffee brand used this morning. K-cup says this is Donut Shop coffee. Great Value (Wmart) brand. It is good. I can get about 2 cups of the desired concentration from one K-cup. I think of K-cup as being a short form of Kowboy Koffee. I might still have an antique percolator out in a storage building? I did have a modern plastic one, but it could have gotten tossed. So, it's boiled water in a small pot filtered through a paper towel for me. Best wishes. G

A man's gotta do what a man's gotta do when it comes to coffee! The offer for the Buck still stands if you just want to fiddle with one!
-
You are a pal, Montana. There wouldn't be any point to getting one now, I suppose. I appreciate the offer anyway. I have scratched around and found a couple of combo blade items for the soon coming February Combo Blade Challenge. I also took a look at the MacGyver thing and the Key Chain affair. I could sign up for one or maybe both of them.
I am a little surprised at how little interest the MacGyver (and also the keychain deal) are realizing. I thought MTO was full of wannabe MacGyveristas. I watched S01 E02 of the Richard Dean Anderson original series. Hadn't seen one in years. I forgot about the duct tape usage. I watched part of an episode of the newer series, but didn't like it much. Best wishes. G

-
Folgers and Climber. Another cold morning but life's simple pleasures are the best. G :D [attach id=0 msg=2515259]

-
You're absolutely right Gary! Great pic!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login