Budget multitool mod
-
Translated via Google, so if something is not quite right, sorry. ;)
Hello everyone, I made a mod for a budget Chinese multitool.
[attach id=0 msg=2514723]
From improvised means and with the help of simple tools: a vice, a hand saw for metal, a drill, files and sandpaper.Video https://youtu.be/I5hqmIkhSDQ
Modifications to factory tools:
- knife - blade shape changed and bevels re-sharpened
- scissors - blunt tip removed
- file - tip re-sharpened into a chisel
- wood saw - tip ground down, thickness reduced
- strap cutter - moved to the outside, tip sharpened for prying
- can and bottle openers unchanged - for now
- Phillips screwdriver - thinned for interaction with adjacent screwdrivers, a groove for the jigsaw shank was also cut
- pliers - a cut was made to fix the handle opening at 90 degrees, and I got into this angle, but over time the groove wore down a little and there is no exact 90 anymore, but there is an intermediate fixation.
- awl - a groove was sawn like a Victorinox, I like the "drilling" control better, although the Chinese sharpened the awl in the other direction, it is a bit inconvenient.
Also, most of the washers between the internal tools were given to get more space and to raise all the tools at the same time
What was added from my own:
- bit holder - was cut from a bit extension. Drilled to fit on the tool axis, but since it was impossible to fix the axis on both sides of the holder, cuts were made in the frame and in the holder to reduce the pressure on the axis during twisting, also to prevent the holder from turning. In order to be able to tighten the axis screw, a hole was drilled from the outside. And a magnet from headphones fits well into this recess.
Also, the depth of the bit seat was shortened, for less protrusion beyond the tool. - a metal saw - I took an ordinary metal saw blade (the ideal hole is 4 mm), broke off the excess, leaving the maximum length, and filed it down so that the lock was accessible and did not interfere with the slots for opening the wood saw + a hook for a nail. I sawed through the frame with the same blade so that it sat without play
- a watchmaker's flat screwdriver from a bicycle spoke
- a scraper-pickler from a bicycle spoke
In order to be able to insert these removable tools, I replaced the spacer washers with a smaller diameter, I took them from the rollers of a bicycle chain. - a ring for a lace - instead of putting an ordinary washer, I put one with two holes and sawed a hook for a nail in it.
- a curly knife - a tool was added under the file, initially I conceived it as a seam ripper, but later it turned out to be also convenient for cutting holes of any diameter in materials such as rubber, leather, a kind of punching, where an awl is not able to pick out anything, and the main knife makes a very large hole. the tip in it is thin but not sharp, especially to more confidently rip seams without fear of piercing materials
- a large flat screwdriver - there is nothing particularly interesting here except that initially it was conceived wider, but then I had to grind it down to implement a holder for a 1/4 square.
- a thin flat screwdriver - great for screws in electrical connectors, both flat and Phillips screws. Together with a Phillips screwdriver, all three tools fill 4 sides of a 1/4 square, and 3 corners, the fit is very tight and without backlash.
- hook - I use it for twisting wire, if, for example, you need to twist a thin wire to get a thicker one, and many other options. in combination with an awl, an excellent wire stripper turned out. The one on the can opener did not suit me at all. Also, a second seat for a jigsaw holder was ground down on the hook
- jigsaw holder - since this option is rarely a chance for me, there is no point in taking up space with a saw holder among other tools, so it was decided to make the multi-tool itself with this holder. The saws are held tightly, they hold the cuts for tearing out, and in the vertical plane they hold the compression of the handles. You need to hold them tightly, but nothing unrealistic.
- tweezers - instead of putting washers on the sides, I had an idea to cut two halves of tweezers out of a stainless steel ruler, so there will be a gap inside from the main tools + saw through a lock to fix the two halves in one position (I actually loosened one a little during production, by fractions of a millimeter,
so sometimes I have to adjust it, but you can always fix it, but I won't do it yet, you can already use it quite successfully). It is removed by friction against other tools. The halves can also be used separately as thin picks or nail picks. - compass - as a result of installing a bit holder and an awl in opposite halves of the handles, it became possible to implement a compass, you only need a pencil stub that is ground down into two brushes on a knife file to fit into the bit holder, now you don't need to look for round pieces to round corners or cut holes.
- A hole punch - it was made by moving the strap cutter to the outside, it hasn't been used in practice yet.
There was also room for a Swiss toothpick, sometimes I use it to clean the charging socket, since it's plastic.
Well, a safety pin fits well under the knife. If before, when I got a splinter, I always went for a Swiss Army Knife, now I have a full set against splinters in the multi-tool.
In general, my idea pursued the following goals: - independence of the tool - carrying the tool without a case, all the screwdrivers and saws I need should be on board, without carrying a case with sets of bits or saws, but if necessary, they can be used, holders are always on board.
- use the space of the multi-tool as much as possible.
- functionality should be expanded beyond the multi-tool itself, or a combination of tools.
- try to preserve the factory dimensions and appearance.
- try to fit new tools in harmony with the native ones.
The material for making my tools was old unnecessary kitchen knives made of stainless steel of different thicknesses.

-
Good job.
-
That looks handy tool, seems that you improved tool to your liking. Nice job.

-
Welcome aboard! Very nice work! Thanks for sharing!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login