And so it begins.... (My adventures into Alox!)
-
Have you thought about doing 111mm mods?
Sent from my iPhone using Tapatalk
-

Can the 93mm in-line awl be put in a 58mm SAK? -
Not sure but it sure would be interesting to see :D

-
@ReamerPunch said:

Can the 93mm in-line awl be put in a 58mm SAK?Sure can.
-
How easy would it be to have this as a SAK scale?
And how cool? :ahhh
-
I hadn't come up with anything new for ages, just alot of remaking many variations of what Id already made. But something got my gears going again on a simple idea that's been stewing for awhile and who's time has come I think.
I was getting more requests for the 93mm mod with dual openers across from the phillips driver. I normally would have to add the cost of the explorer to the build just to get the phillips driver and I really never loved that. And I cant just make a bit driver for standard 1/4 bits as that's way too thick.. but then I thought oh right that's basically like what Leatherman has on their tools. The squished bits that work ok and takes up less width.
I prototyped the adapter shape in aluminum just to get the pivot shape correct, but now I have to design the actual holder in Ti and make a retention spring to engage that little divot.
[attach id=0 msg=2516138]
[attach id=1 msg=2516138]


-
@Syph007 said:
I hadn't come up with anything new for ages, just alot of remaking many variations of what Id already made. But something got my gears going again on a simple idea that's been stewing for awhile and who's time has come I think.I was getting more requests for the 93mm mod with dual openers across from the phillips driver. I normally would have to add the cost of the explorer to the build just to get the phillips driver and I really never loved that. And I cant just make a bit driver for standard 1/4 bits as that's way too thick.. but then I thought oh right that's basically like what Leatherman has on their tools. The squished bits that work ok and takes up less width.
I prototyped the adapter shape in aluminum just to get the pivot shape correct, but now I have to design the actual holder in Ti and make a retention spring to engage that little divot.
[attach id=0 msg=2516138]
[attach id=1 msg=2516138]
Very cool, can't wait to see the final design!
Also, what do I gotta do to get some of those custom drawers you make for 84mm's?
-

Syph007 has posted again - We missed you
You seemed to have disappeared off the face of the earth :oCouple of queries/clarifications.
How come you can't just make a Phillips driver? - As one fits there already ie your previous mods
So what you are doing is creating a bit holder that takes LM bits - Yes ? ???
If so, that is very cool, a great idea (as usual from you), gives more flexibility, and is a nice mashup of LM and Vic!!
But how does the CNC mill cut out the hole in the adapter?
As well as the spring challenge you mentionAnyway hopefully all will be revealed in this thread ....... Just like the old days :D :ahhh
And hope all well with you, and your modding business and the cabin !
-
Oh wow! That's pretty cool. That's an artistic engineering mind right there.
-
It would cost me more to make a phillips driver since it would need to be steel and heat treated. Also they wear and get broken. Nice to be able to replace it and also use other bits. I need a red robertson more than a phillips. I could also make a thicker drawer or other means to hold a couple more bits in the scale.
Ya this should hold any LM bit. They are easily available on amazon for a low price.
I cant make the adapter from solid Ti it would be insanely expensive to buy material that thick. It will be made of 3 layers likely riveted together. The center layer will have a retention spring the same style I use for my fold out drawer. Never had one of those fail before.
Business is good, I do more work during these months vs summer as I like to be in the woods. I will have my cabin finished this year for sure. All I got done last year was to finish the roof and put in windows.
I'm doing my first knife show in Toronto this April. I wasnt sure about it but from doing this for over ten years I have literally buckets full of brand new parts. My plan is to make tons of simple SAks with all the different scales I make and sell them for a lower price to get them into use. I'll made some fancy ones too but if I go and can sell 100 or so I'd call that a success. A table at the show was only $175 which isn't bad at all.
Cheers
@Huntsman said:

Syph007 has posted again - We missed you
You seemed to have disappeared off the face of the earth :oCouple of queries/clarifications.
How come you can't just make a Phillips driver? - As one fits there already ie your previous mods
So what you are doing is creating a bit holder that takes LM bits - Yes ? ???
If so, that is very cool, a great idea (as usual from you), gives more flexibility, and is a nice mashup of LM and Vic!!
But how does the CNC mill cut out the hole in the adapter?
As well as the spring challenge you mentionAnyway hopefully all will be revealed in this thread ....... Just like the old days :D :ahhh
And hope all well with you, and your modding business and the cabin !
-
-
Thanks for the update buddy - It all sounds great
Good luck with the show - I am sure it will be fantastic and can't wait to see the adapter evolve
You're amazing!!!
-
@Syph007 said:
I hadn't come up with anything new for ages, just alot of remaking many variations of what Id already made. But something got my gears going again on a simple idea that's been stewing for awhile and who's time has come I think.I was getting more requests for the 93mm mod with dual openers across from the phillips driver. I normally would have to add the cost of the explorer to the build just to get the phillips driver and I really never loved that. And I cant just make a bit driver for standard 1/4 bits as that's way too thick.. but then I thought oh right that's basically like what Leatherman has on their tools. The squished bits that work ok and takes up less width.
I prototyped the adapter shape in aluminum just to get the pivot shape correct, but now I have to design the actual holder in Ti and make a retention spring to engage that little divot.
[attach id=0 msg=2516138]
[attach id=1 msg=2516138]
That is an awesome idea. Would it be able to be used across from the magnifying glass in place of the regular phillips?
-
@Sos24 said:
That is an awesome idea. Would it be able to be used across from the magnifying glass in place of the regular phillips?It will have to be thicker than a standard Phillips by 0.05" so it would be too wide to be a direct replacement. I will figure out a way to use it on a 91mm sak that though for sure. For reference the vic Phillips is 0.110" thick and a LM bit is 0.125" thick
-
@Syph007 said:
It will have to be thicker than a standard Phillips by 0.05" so it would be too wide to be a direct replacement. I will figure out a way to use it on a 91mm sak that though for sure. For reference the vic Phillips is 0.110" thick and a LM bit is 0.125" thickI can’t wait to see what you come up with.
-
First try at the middle layer. The lower limb has a nub which engages the divot in the LM bit.
Holes are for riveting together. Not sure how I will assemble final one but rivets are easy enough.
[attach id=0 msg=2516673]
[attach id=1 msg=2516673]
[attach id=2 msg=2516673]



-
That looks awesome!!
-
Oh nice!

-
Wow! I can't even imagine the thought process it took to come up with that. Looking forward to seeing the final assembled rendition.
<a href="https://media1.giphy.com" target="_blank" rel="noopener noreferrer"><img src="https://media1.giphy.com/media/v1.Y2lkPTc5MGI3NjExdGUzYTIwYnI4cHpqYnFyNXF0dTFnaGI2YWw5bDJiZnRnM2Y0YW1xciZlcD12MV9pbnRlcm5hbF9naWZfYnlfaWQmY3Q9Zw/OK27wINdQS5YQ/giphy.gif" alt="banner" style="max-width: 100%; height: auto;" /></a>
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login