And so it begins.... (My adventures into Alox!)
-
@Syph007 said:
I hadn't come up with anything new for ages, just alot of remaking many variations of what Id already made. But something got my gears going again on a simple idea that's been stewing for awhile and who's time has come I think.I was getting more requests for the 93mm mod with dual openers across from the phillips driver. I normally would have to add the cost of the explorer to the build just to get the phillips driver and I really never loved that. And I cant just make a bit driver for standard 1/4 bits as that's way too thick.. but then I thought oh right that's basically like what Leatherman has on their tools. The squished bits that work ok and takes up less width.
I prototyped the adapter shape in aluminum just to get the pivot shape correct, but now I have to design the actual holder in Ti and make a retention spring to engage that little divot.
[attach id=0 msg=2516138]
[attach id=1 msg=2516138]
That is an awesome idea. Would it be able to be used across from the magnifying glass in place of the regular phillips?
-
@Sos24 said:
That is an awesome idea. Would it be able to be used across from the magnifying glass in place of the regular phillips?It will have to be thicker than a standard Phillips by 0.05" so it would be too wide to be a direct replacement. I will figure out a way to use it on a 91mm sak that though for sure. For reference the vic Phillips is 0.110" thick and a LM bit is 0.125" thick
-
@Syph007 said:
It will have to be thicker than a standard Phillips by 0.05" so it would be too wide to be a direct replacement. I will figure out a way to use it on a 91mm sak that though for sure. For reference the vic Phillips is 0.110" thick and a LM bit is 0.125" thickI can’t wait to see what you come up with.
-
First try at the middle layer. The lower limb has a nub which engages the divot in the LM bit.
Holes are for riveting together. Not sure how I will assemble final one but rivets are easy enough.
[attach id=0 msg=2516673]
[attach id=1 msg=2516673]
[attach id=2 msg=2516673]



-
That looks awesome!!
-
Oh nice!

-
Wow! I can't even imagine the thought process it took to come up with that. Looking forward to seeing the final assembled rendition.
<a href="https://media1.giphy.com" target="_blank" rel="noopener noreferrer"><img src="https://media1.giphy.com/media/v1.Y2lkPTc5MGI3NjExdGUzYTIwYnI4cHpqYnFyNXF0dTFnaGI2YWw5bDJiZnRnM2Y0YW1xciZlcD12MV9pbnRlcm5hbF9naWZfYnlfaWQmY3Q9Zw/OK27wINdQS5YQ/giphy.gif" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
That looks like an interesting idea
What worries me are lateral forces that the bit holder will have to endure while twisting screws. You know when people get stronger bits, they use it on bigger screws :ahhhLooking forward to what you come up with

-

Any chance to see the part available to amateur modders once you have enough inventory?
-
@enki_ck said:
That looks like an interesting idea
What worries me are lateral forces that the bit holder will have to endure while twisting screws. You know when people get stronger bits, they use it on bigger screws :ahhhLooking forward to what you come up with

Ya I will have to test one to failure to see how it holds up. This first try will at least give me the correct shape then I can alter the retention mechanism if I needs to be stronger.
-
Rev2 moves retention spring to the inside and more rivet holes for body to strengthen.
The spring bar needs to be a bit thicker and angled down to remove the hot spot for bend. Just about there and I can test an assembled one. I made this internal part such that I just need to make 2 liner thickness profile on each side and it can be riveted together to test.
I can make the areas around the holes more meaty if needed but its going to be a balance between keeping it small as possible but as strong as needed.
[attach id=0 msg=2516806]

-
Rev 3 of the inner part and Im 100% happy with the retention spring.
I made some side shells and did a quick knock up to give it a functional test. Holds and retains bits perfectly and the little spring moves freely inside the assembly.
[attach id=0 msg=2516830]
[attach id=1 msg=2516830]
[attach id=2 msg=2516830]
[attach id=3 msg=2516830]




-

Amazing !!
Fantastic and brilliant concept, design and build - And a great addition to any SAK.
Enki's point about the torque I guess is valid - But if it is in a screwed together SAK - Presumably this is less of an issue - Let us know how the tests go.This is going to be an expensive addition to a SAK though?

Three custom parts - plus rivets and lots and lots of work - Although I suppose once you have the design - It's just pumped out of the CNC and few whacks of the hammer to join it together ..... ;) :D :oI hope you get a commission from LM on each build - Thanks to the sales of their bits!! ;)
EDIT PS: What is the other large hole of on the outer piece? - the one next to the pivot rivet hole - Thanks
-
One more reason to get the Leatherman ratchet! :ahhh

-
That adapter looks really handy on SAK
-
Awesome concept

-
I really like it and I am inspired considered making my own.
-
That looks amazing.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login