Cowboy Club
-
It's on Page 8, second from the top, of available awards under "your profile". It's officially the "Discontinued and SAK/Multitool" challenge.
-
@Barry Rowland said:
It's on Page 8, second from the top, of available awards under "your profile". It's officially the "Discontinued and SAK/Multitool" challenge.Thanks Barry. Didn't know how that worked. I had only read about the 30 day challenges. That sounds so much fun. Will definitely do that.
-
The Cowboy is not a SAK we see everyday. I guess you do, since you own one. :D
-
I get why there aren't too many of them out there. I guess it is a rather strange set-up? A backside Philips on a 111 mm is perhaps not the most sought after tool on a SAK, and when it is one of only a few save the blade, I get, that the demand for such a knife is limited. I'm obviously very pleased with mine though. A 111 mm so slim and light is a pleasure to carry and use.
-
i just noticed that the entire 111mm lineup has the liner lock now. please tell me i'm wrong
-
I think you are right Styx. Unfortunately. :-[ I don't know if the standard Sentinel might still have the side lock, but I doubt it.

-
going by the pictures, it doesn't
-
@styx said:
i just noticed that the entire 111mm lineup has the liner lock now. please tell me i'm wronghttps://sakwiki.com/tiki-index.php?page=Victorinox+111mm
Last paragraph. Looks like you are a bit behind the times!!
;) :)You can also check here and here:
https://sakwiki.com/tiki-index.php?page=Victorinox+111mm+Slide+Lock+Models
https://sakwiki.com/tiki-index.php?page=Victorinox+111mm+Liner+Lock+Models
And the individual pages of the slide-lock models.This was quite a big project for the Wiki!!
-
@Dane said:
Is the Outrider so bad when it comes to bulkiness?
I'm starting to get used to the Workchamp, and that just about crosses the line of actually being too big for pocket carry for my comfort.It's actually fine for me TBH.
Although it does depend on the trousers ..... Jeans and working or hiking shorts are fine.
Would not want to carry in suit/office work trousers and maybe not even chinos@Dane said:
..... What bothers me a bit more is the backspring awl ..... I can't help to wonder if an inline version would offer better control? I also reckon that the added length will be helpful? .... an inline awl would give me the possibility to make deeper holes and access harder-to-reach spots on my projects .... but I think I would prefer the grip and handling of an inline awl when whittling and doing woodcraft.For that reason, an Alox with an inline awl is my planned next purchase when I'm visiting a Vic store shortly. I just can't seem to agree with myself which Alox it will be though? .......
I am a big fan of the back-spring awl and its probably my third most used tool after scissors and big blade.
I use it mainly for pilot holes when drilling +++ or to make a complete hole in something.However, you are going to love the inline awl, and as you say it will be much better suited for your uses.
Good luck with the Alox decision .... And you know what we say here at MTo? ??? Buy them awl!! :o -
Mine too, in that order. On the ones with sewing eyes my wife can sew with the awl, and crochet with the hook.
-

PS. Thanks to this club, and page, the Cowboy Wiki page has had a small refresh

-
@Dane said:
For that reason, an Alox with an inline awl is my planned next purchase when I'm visiting a Vic store shortly. I just can't seem to agree with myself which Alox it will be though?
I'm leaning towards the Harvester at the moment, since the small pruner blade on this could be interesting for whittling. But I'm also considering Farmer X or Pioneer X, for the scissors obviously, perhaps combined with an Alox 2, which also has the pruner blade. Then I can have both scissors and pruner blade. I'll probably only be able to decide when I'm at the store where I can hold them in my hands. :)Pioneer Harvester/Swiss Army 7 is a brilliant woods/whittling SAK. Main blade, pruning blade, saw, and inline awl all come in handy. Thick enough to get a good grip on, but not so thick or heavy as to be awkward to use or carry. Smooth back springs and no key ring make it very comfortable in hand.
Add a Classic or even better, a Rambler, and you’ll be covered for scissors, plus a few bonus tools.
-
@Huntsman said:
https://sakwiki.com/tiki-index.php?page=Victorinox+111mm
Last paragraph. Looks like you are a bit behind the times!!
;) :)You can also check here and here:
https://sakwiki.com/tiki-index.php?page=Victorinox+111mm+Slide+Lock+Models
https://sakwiki.com/tiki-index.php?page=Victorinox+111mm+Liner+Lock+Models
And the individual pages of the slide-lock models.This was quite a big project for the Wiki!!
makes sense. haven't looked at the 111mm models in a very long time. only fairly recently the Outrider and Snetinel/Alpineer have peaked my interest since the '08 Soldier and Hunter were a bit out of touch for my needs
-
@Huntsman said:
I am a big fan of the back-spring awl and its probably my third most used tool after scissors and big blade.
I use it mainly for pilot holes when drilling +++ or to make a complete hole in something.However, you are going to love the inline awl, and as you say it will be much better suited for your uses.
Good luck with the Alox decision .... And you know what we say here at MTo? ??? Buy them awl!! :oI have also been way pleased with the backspring awl. It's also one of my most used tools. I kind of see it as a third whittling blade, specifically for making holes. It saves me a lot of time and effort when whittling chains for example. I don't really understand the bad press, the backspring tools sometimes get. I think they function really well, and I do appreciate them. Especially the awl.
I actually never before thought that the awl could be any different. It only occurred to me after I began to get a bit more into SAk's and started following this forum. I have always been pleased with the awl and like the way it handles between the fingers, when holding it in a fist. It lends itself to good control and handles some heavy tasks.
I'm yet to try the inline awl. I'll let you know, when I get the chance.
And thanks Nate J.
I will probably search for a Harvester now. It seems to tick many of the boxes, I look for in a SAK. :D -
@nate j said:
Pioneer Harvester/Swiss Army 7 is a brilliant woods/whittling SAK. Main blade, pruning blade, saw, and inline awl all come in handy. Thick enough to get a good grip on, but not so thick or heavy as to be awkward to use or carry. Smooth back springs and no key ring make it very comfortable in hand.Add a Classic or even better, a Rambler, and you’ll be covered for scissors, plus a few bonus tools.
Thanks Nate J.
I really appreciate it. This makes me what to order one straight away. :D It's all the things I look for. Just wonder if the pruner blade can reasonably replace my most used small blade?
And if I can maintain, sharpen and strop the curved pruner blade? I guess I can learn. ::) :D -
PS. Thanks to this club, and page, the Cowboy Wiki page has had a small refresh

That's awesome.
Thanks Huntsman. I'm glad the Cowboy gets a bit of shine. :D What's the update? I can't tell even though i read through the page a couple of times. ::) -
****Oh the changes were very very minor
Just some shuffling around and formattingIf you’d really like to check:
Click on the History button at the bottom of the page.
Then on the next page select any two versions - eg the last two - then press the Compare button!
-
@Dane said:
Thanks Nate J.
I really appreciate it. This makes me what to order one straight away. :D It's all the things I look for. Just wonder if the pruner blade can reasonably replace my most used small blade?
And if I can maintain, sharpen and strop the curved pruner blade? I guess I can learn. ::) :D
D!What’s your most used small blade now?
-
@nate j said:
D!What’s your most used small blade now?
The small one on the other SAK's. I wonder if the pruner blade is slim enough for detail work when whittling?
The curve on it makes me think it would be quite good for chip carving types of work, but not so much for reaching hard to reach spots due to the width of it from the edge to the spine. -
@Huntsman said:
****Oh the changes were very very minor
Just some shuffling around and formattingIf you’d really like to check:
Click on the History button at the bottom of the page.Then on the next page select any two versions - eg the last two - then press the Compare button!

Cool, Huntsman. Thanks.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login