Signal owner's club
-
Poncho took the words right outta my mouth! -
Dan, I've had a great time with the Signal you sent me. It's come in handy a pile of times! For what I do anymore, the tool set is pretty much ideal.
-
I wear mine all the time. It came in handy tonight at work when the guide for a sliding shelf broke loose. A screw was jammed in the track. The blue Signal's pliers retrieved it. I also used the hammer to bend down a piece of said track.
Like the saying goes, "I have a Leatherman, I can help!"
-
Congratulations Barry on your TOPO Green SIGNAL!
I am moving my AQUA SIGNAL to be part of my kit. To be carried in a waist pack that accompanies me daily.
I have found a Sheath it fits within, a Nylon / Velcro style with side loops and rear pocket.
[attach id=0 msg=2521225]
The bit kit is overkill, I will likely pick up one slide that carries the smaller selection. The one pictured is 1 of 2 from the 21 bit kit.

-
Thanks Gordon! I like that sheath. I miss the older Leatherman sheaths that had a pocket for a bit kit.
I'm rarely without my blue Signal! It's come in handy so often.
-
Another SIGNAL arrived today, still has the BO dust on the implements
[attach id=0 msg=2522803]
[attach id=1 msg=2522803]
(Auction site find, a very good bargain, 100% better than listed pictures)


-
Wow, that one looks like new LC, great find!

-
Thank you FoBe.Worth the wait, tracking through USPS system, had two days missing in New Jersey, then arrived in Indianapolis, and set for 2 more days, as if lost! This morning repots indicated out for delivery!
Definitely worth the wait! 😁
-
Beautiful find Gordon!
-
Thank you both very much.
This Coyote Tan SIGNAL was received in as much new condition it it was in a factory package.
The sellers pictures, presented a good specimen, yet the received model was excellent.
I am very happy and feel almost guilty putting to use in my waist bag for day hikes and other excursions in my adventures.
I first will need to bath it to remove the BO dust and then lubricate. Today was likely the first time the implements were deployed with the exception of the blade or saw.
Suspect it may have been a gift, the recipient had no interest or gratitude receiving. A true shame.
Handles date stamp indicate 11 23 for those interested.
-
What a great find!

-
@LoopCutter said:
Thank you both very much.This Coyote Tan SIGNAL was received in as much new condition it it was in a factory package.
The sellers pictures, presented a good specimen, yet the received model was excellent.
I am very happy and feel almost guilty putting to use in my waist bag for day hikes and other excursions in my adventures.
I first will need to bath it to remove the BO dust and then lubricate. Today was likely the first time the implements were deployed with the exception of the blade or saw.
Suspect it may have been a gift, the recipient had no interest or gratitude receiving. A true shame.
Handles date stamp indicate 11 23 for those interested.
LC, I'm just learning. May I ask about your preferred lubrication product and method?

-
@KevCarter said:
LC, I'm just learning. May I ask about your preferred lubrication product and method?
There are a few, but for the most part, for pivot lube I have used a product named KPL, and can be found on Amazon.
If I know I plan to use for food duty, I stick with plain food grade Mineral Oil, the type I treat my cutting board that I made in 1968 of Cherry for my GrandMother’s Christmas gift. Now mine since she past away several years ago. I have any dipped stubborn restoration and soak to make sure all points are covered, and then repeat a bath in Warm water and Dawn Blue to release any stubborn gunk.
Then after drying, then only administer Mineral Oil to the points that move. And always remove any excess from handles inside and out. No sense catching dirt or lint. -
Same here Gordon. I gave my blue Signal a bath and mineral oil last week. It was getting a wee bit dirty from all the use it's seen.
-
@LoopCutter said:
There are a few, but for the most part, for pivot lube I have used a product named KPL, and can be found on Amazon.If I know I plan to use for food duty, I stick with plain food grade Mineral Oil, the type I treat my cutting board that I made in 1968 of Cherry for my GrandMother’s Christmas gift. Now mine since she past away several years ago. I have any dipped stubborn restoration and soak to make sure all points are covered, and then repeat a bath in Warm water and Dawn Blue to release any stubborn gunk.
Then after drying, then only administer Mineral Oil to the points that move. And always remove any excess from handles inside and out. No sense catching dirt or lint.@Barry Rowland said:
Same here Gordon. I gave my blue Signal a bath and mineral oil last week. It was getting a wee bit dirty from all the use it's seen.Thank you very much guys!

-
HAPPY ST. PADDY’s DAY 
GREEN you say, should be worn if you wish to avoid a pinch

[attach id=0 msg=2523222]
[attach id=1 msg=2523222]



-
Right you are Gordon and back at ya!


-
Great pics, LC and Barry

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login