MacGyver Challenge - April
-
Some cool gear floating around. Looking to see what y'awl come up with.
Day 1
Carrying a Rainier today. I used the awl and cap-lifter to punch the chip out on this expired credit card.
[attach id=0 msg=2525350]
Wrapped the card in duct tape for my duct tape carry.
[attach id=1 msg=2525350]
Lengthwise seemed to make more sense, since the width of my tape roll is about the same as the card in this orientation.
Awlso pictured, my MacGyver Model 1 MT. I was going to get a bigger one, but I found this on the floor on the way into work. I decided to embrace the serendipity.
I admit that I was skeptical of the duct tape carry. Well, son of a gun, I actually used some today. I use these ropes to teach my kids knots sometimes. I duct tape one end, partially because when you need to do 30 or so at a time it's a lot quicker/easier than whipping it, and partially because "burnt end" and "duct tape end" are an easy way to call the ends for kids who don't know anything about rope.
One of the duct tape pieces slipped off, so I pulled the card out of my wallet, unwrapped a couple inches, and back in business.
[attach id=2 msg=2525350]



-
Day 1
Decided on Serrated Spartan for this challenge.i added a straight pin and micro screwdriver to the corn screw. The paper clip is on the key ring and I have a small roll of duct tape that I will pocket carry. So far just used the main blade to cut a loose string of of some pants. This is going to be a really fun challenge!!

-
Hello everybody. I hope late arrivals are accepted, so allow me to add my name to the list:
- ReamerPunch
- old Lefty
- ThisAlarm7
- Explorer
- Grand_Banana
- lazar
- pa_strunk
- BPRoberts
- Sos24
- IMR4198
- MTSAK
- Humayd A R Mahomedy
- SteveP
- Kaevin
- Pacu
- marlowe221
- Fireman
- Ozark75
- SteeleJ1976
- David Bowen
- Storm
- Mr.ToolJunkie
- Dane
- hsherzfeld
- AzteCypher
- Gra_farmer
- Echotech
- LoopCutter
- m47mu74nt
- Antti Lammi
- meserie
This is my first challenge - I just couldn't miss The MacGyver Challenge.
[attach id=0 msg=2525367]
So here is my trusty Explorer - my first SAK, which I have bought while on a short family trip to Austria, in the winter between 2008 and 2009. It has served me well since then, and hopefully it will continue to do so.
The paperclip is wrapped around a segment of a bamboo skewer, as part of an experiment that I did recently with the 6th graders, to demonstrate the effects of static electricity.
The tape is wrapped around an IKEA pencil, which I had just sharpened using the Director. The Director is a more recent acquisition, and it has been revitalized by the nice people at Victorinox last year. Interestingly, they (probably) changed the liners under the stainless scales, but decided to drill them to match the hole that had been drilled through the whole knife. The initial hole had been poorly executed, so the scales and the liners were bent in its vicinity (who would drill through a Director, anyway?).
The pencil sharpening is a habit that I took up mostly from my Grandfather, who always used to carry a nice, simple little pocket knife similar to the Excelsior / Pocket Pal / Popular.Since I haven't properly introduced myself yet - despite having lurked around this forum for some time - let me wish all you fine folks here a happy challenge and all the best!

meserie
-
Day 2
Tinker large SD helping get into a switchboard cabinet . Usually an alox man, the red cellidor scales are really turning my head 😍
[attach id=0 msg=2525369]
-
@ReamerPunch said:
Clipper looks like he needs a break.
Indeed he does. That's why he was in retirement. I've honestly had that clip for years. Just can't put him out to pasture.
<u>Addition to Day1</u>
Had to swap out the water valve on our washer. Needed to pry off those connectors without breaking them. The Super Tinker came in clutch. Bear in mind, this washer is only 3yrs old. They don't make them like they used to.

-
Day One of Mac Challenge
Vic Handyman, some duct packed flat for carry and my paperclip

Used the SAK to trim duct for ease of carry.

-
@ReamerPunch said:
I need a chunky yellow friend!
Everyone needs a chunky yellow friend!
-
Day 1
Here’s how I carry the required items for the MacGyver challenge every day.
[attach id=0 msg=2525404]
The duct tape is wrapped around an old library card. The SAK is a Spartan. I use the paper clips as a money clip, etc.
No uses to report today.

-
Day 2
Snipped off a label

-
Day 1
Picture of the pocket carry. I have a larger amount of standard Duck tape in my edc bag, but for my pocket, just carrying about 24in of the 1in version.Even though I had a lighter, I thought I’d use the my SAK w/Firefly for lighting my alcohol stove. Made me think that this challenge is probably a good one to make a soda can alcohol stove using a SAK.


-
Agent 4198 password dogbone. Leave assignment data in usual manner. Protocol yellow. Normal equipment load today including SAK with sleeping gas scale module, Papermate stick pen with micro laser and silver fabric adhesive strip. Paperclip/ lock pick. Ready for action. Wait.... what's that hissing sound.... Ulp, SAK has..a...... leak.........

[attach id=0 msg=2525283]I must have missed the Felix Immler episode where he added the sleeping gas scale. Damn...
-
Day 1:
Kicking off the challenge with a pic of the tools for the month - SwissChamp with paperclip stored next to the corkscrew and a wrap of Gorilla Tape.
Let's see what the month brings!

-
Day 2:

-
💥DAY 01💥

this challenge really snuck up on me!


figured I'd start this one off in true MacGyver fashion with this 84 mm tinker Small from 1985. You'll notice the larger ultra vintage MacGyver multitool is such an early model that it's actually starting to rust. there's no tang stamps so it's hard to pin down the exact year.
i've chosen biodegradable paper tape rolled up upon itself. I prefer this tape carry because its quite strong but it can be torn easily. the adhesive is made of potato starch so it makes for a great fire starter that doesn't have a terrible smell.
We've got a good group here and I don't remember who said it but I think the saying goes...
With a little bit of imagination, anything is possible

-
Day 2
Today's carry.
Wrapped some re-used duct tape around a stick snapped off a RAT test cotton bud rod. And wrapped it around the silver paper clip on the key chain.

-
Day 2
In this episode, my Manager peeled a couple oranges for me, so who's really the boss?

Purple paperclip was used to clean the Manager's end (yeah, maybe he's the boss after all).
Grey duck tape standing by.
-
<u>DAY 2</u> Climber , paperclip, and Bic pen (weapon, chest tube, etc) with T Rex tape and Coban (first aid).
[attach id=0 msg=2525445]

-
Day 2
Spartan, tape and paperclip ready for whatever challenges today throws at me/them.

-
Day 2
Agent 4198 reporting. Password toadstool. Yellow protocol. Loss of sealant integrity in the sleeping gas module resulted in a much needed rest yesterday. I heard of it happening once before with an agent. Unfortunately, his SAK had a laughing gas module leak. Field agents had to strap him to a chair with duct tape and slap him with wet towels. Nerve gas? Only the 00 series agents get that stuff. Like 007, right? License to kill goes with 00. The 01s get a license to maim, 02s get license to beat up, etc. 41 series agents like me only get a license to annoy. Enough shop talk. Time for another photo.[attach id=0 msg=2525449]

-
Day 2.
The SAK in the MacGyver tool armory.
[attach id=0 msg=2525454]
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login