What did you use your Leatherman for today?
-
@Crunchie64 said:
Sounds nasty!I think I’d be fixing that with paraffin, a match, and an insurance claim.
TBH I didn't know if I could place it back one piece and working. But it is better than just let them sit in a bag forever. Now I am pretty confident there is no roach in the X220.
-
Took some old rotten garden furniture apart this afternoon.
The P4 was fine for most of it, but for the really stubborn bits, I broke out the Crunch too.
[attach id=0 msg=2525018]

-
What I can see in the photo doesn't look bad. I guess it rotted at the points that it touched the ground?
-
@Farmer X said:
What I can see in the photo doesn't look bad. I guess it rotted at the points that it touched the ground?Actually, no.
I got it third-hand, passed through a couple of family members.
It spent about five years getting more and more overgrown by brambles and other weeds, so there are patches of rot on just about every section.
A shame, because it’s a nice chunky chair.
-
@Crunchie64 said:
Took some old rotten garden furniture apart this afternoon.The P4 was fine for most of it, but for the really stubborn bits, I broke out the Crunch too.
[attach id=0 msg=2525018]
Nice photo Crunchie! 
-
@KevCarter said:
Nice photo Crunchie! 
Thanks.
It was the first day of British Summer Time, and an absolutely beautiful day.
-
@Crunchie64 said:
Took some old rotten garden furniture apart this afternoon.The P4 was fine for most of it, but for the really stubborn bits, I broke out the Crunch too.
[attach id=0 msg=2525018]

For a smallish tool the Crunch is surprisingly robust, and when you really need locking pliers normal pliers just can't do the job.
-
Happy Easter to those who celebrate 🎊.
My wife asked me to open a bottle of kombucha for her
[attach id=0 msg=2528019]and since I already had a cap lifter ready - I used it to poke a hole in a coconut
[attach id=1 msg=2528019]Worked really well. But. I wanted to mix some protein with coconut juice, so in order to be able to easily pour juice into the shaker I needed two holes. Awl to the rescue.
Glad I made this custom Wave - it's gonna be 10 years since I received it as gift from my mom - after all the years of use and quite a few mods - it has a really special place in my heart and I use it every now and again
.
[attach id=2 msg=2528019]


-
Happy Easter Oleksandr to you and your family!
-
Hope you had a great Easter, and good to see you again. Hope all is at least okay with you and yours!

-
@in_sympathy said:
Thank you my friend, thankfully we are indeed more or less safe and doing okay, considering the situation.Good to be back 😃 hope you’re having great times 👍🏻
We’ve not met Sir, and I just noticed where you are from. I can’t pretend to know or understand what you and your family are experiencing, but my thoughts are with you.

-
Unfortunately as we got in the car to take Mrs Alarm 7 out to the Outback for Mother's Day dinner the dreaded TPMS light came out and the car said the left rear tire lost pressure. Sure enough, screw. Never changed the tire myself yet on this newer (awesome) VW we got, the manual said a wire thing came with the kit to pull the lugnut cover off. We got the car gently used, it was not in evidence. No matter...Wave to the rescue. Worked great.



-
I wound up doing the same thing with my Beetle tire. I couldn't find that hubcap remover to save me! Once everything was put back together, it turned up....in the glovebox

-
Good to hear you were able to install your (space saver) spare and continue on. A lot of cars don't come with a spare any more which means for many tyre failures you will need to be taken away with a flat-top recovery truck.
In my VW Golf the lug bolt cover remover was with the spare wheel, jack etc in the boot. It is just a piece of wire with an L shape (to hook on the inside of the cover) and a round circle for a finger to pull on.
PSA After the tyre place has repaired your tyre, then loosen and re-tighten all the lug bolts to make sure they weren't over-tightened by a gorilla using too many ugga-duggas on the air-wrench when installing the fixed tyre.
-
@Barry Rowland said:
I wound up doing the same thing with my Beetle tire. I couldn't find that hubcap remover to save me! Once everything was put back together, it turned up....in the glovebox
I tore the car apart but I'll bet like you I find it when everything is said and done :ahhh
@gregozedobe said:
Good to hear you were able to install your (space saver) spare and continue on. A lot of cars don't come with a spare any more which means for many tyre failures you will need to be taken away with a flat-top recovery truck.In my VW Golf the lug bolt cover remover was with the spare wheel, jack etc in the boot. It is just a piece of wire with an L shape (to hook on the inside of the cover) and a round circle for a finger to pull on.
PSA After the tyre place has repaired your tyre, then loosen and re-tighten all the lug bolts to make sure they weren't over-tightened by a gorilla using too many ugga-duggas on the air-wrench when installing the fixed tyre.
Happily the car had everything BUT this spare tire wise....and always good advice RE the tightening.
-
Fixed (bandaided) the oakley latch ex glasses "sock" (left arm) . It's splitting at one end. Cut a piece of heatshrink with surge and cricket helped to shrink to size. That should hold up well before (if I can) get the replacements.
It also answer my wife why I am carrying strange things and my stuffs are mostly black.


-
My Surge helped me today car repairing, pliers was helpful holding nut while installing bolts in place, last tightening was done by proper tools.
[attach id=0 msg=2532072]

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login