MacGyver Challenge - April
-
Day 30
Last day with classic sd scissor use.
I had been carrying the classic SD for quite some months. It has been very handy and very easy to carry on keychain. The added tapes had occasional use. The tapes are very handy when they saved the day.
The tweezers and toothpick were great help. Never did I realized I use them that much until this challenge.
This and the bond challenge. I will not forget. These two challenges happened when there were some big changes going on for me. This was one of the low point I was struggling through.
Some part of the blade seems to have chipped when viewing against light source. I wonder if it is time for me to sharpen it...
I thought I would buy one or more Sak through this challenge. But strangely that did not happen. Or I was either really not motivated to do it or too busy.
-
Day 30
[attach id=0 msg=2529494]
This CHALLENGE was surprisingly educational as well as entertaining for this old codger!

I learned that I like the 91mm models as much as I do my 84mm units.
I acquired a few more models than I thought I would. The picture above is of the SAKs I know I will rely on going forward as common tools, that one or two will find in a pocket.
These include left to right, SPORTSMAN, SPARTAN, TINKER 91, CLIMBER, and COMPACT.
THE TINKER will be paired with the CLIMBER, in a sheath
As a pack kit. The TINKER replacing a SE Spartan.The SPORTSMAN will see pocket duty replacing the EVO10, same tools just slimed carry.
The TECH SPARTAN looks good and is most functional for my needs. And the COMPACT, for carry to meetings or social events. The pen feature will be handy for forms or notes.
I did enjoy awl the posts by awl! Even reread many more than once.
eBay was my friend this month as I did acquire a couple models at bargain buy it now pricing, including a model I had desired just for metal file but did not like the new price. A less than $30 option appeared, and I received a very very good MOUNTAINEER, that had a dull blade and a little bit of tack on a scissor blade.
I never really watched MacGyver in the 80s, have tried a few episodes recently but just not holding my interest.
Thank you ReamerPunch for hosting.

PS: Last night, I did actually use the PAPERCLIP and the wrap of tape. I will need to recreate and share later today. The resulting creation went home with a granddaughters friend who had a cast on her arm, broke on the weekend. I MacGYVERED a tool to make her life a tad less stressful. Standby…

-
Last day with classic sd scissor use.
I had been carrying the classic SD for quite some months. It has been very handy and very easy to carry on keychain. The added tapes had occasional use. The tapes are very handy when they saved the day.
The tweezers and toothpick were great help. Never did I realized I use them that much until this challenge.
This and the bond challenge. I will not forget. These two challenges happened when there were some big changes going on for me. This was one of the low point I was struggling through.
Some part of the blade seems to have chipped when viewing against light source. I wonder if it is time for me to sharpen it...
I thought I would buy one or more Sak through this challenge. But strangely that did not happen. Or I was either really not motivated to do it or too busy.Badge awarded

-
Day 30 follow up
As mentioned I did finally had a need for the paper clip (large) and duct tape.
As I shared at daughter’s last night for dinner, a friend of granddaughter visited, right wrist and hand in a cast. Result of a fall this past weekend.
She shared that she needed to get up early so her sister could button her work shirt and her fingers were still numb from the injury.
I told her I could help her and did reshape my paper clip, while she rolled her eyes, and granddaughter said hold on he is sometimes clever in strange ways.
I then unrolled the tape about 4 inch’s and then laid the reshaped clip onto the tape and then roll it up.
This is a make shift button threader, can be used to pull a button through the hole, to fasten. Or, can guide a button out of the hole to unfasten.
[attach id=0 msg=2529507]
the tool
[attach id=1 msg=2529507]
insert through button hole and grab the button.
[attach id=2 msg=2529507]
pull the tool and button through hole. Slide tool from under button.I have finger dysterity issues myself and have a few of store bought items laying around the house. But, a pain if traveling if I forget to pack one and the paper lip idea helped my last trip. The tape makes a better option to grip. 😉



-
I'll have to check, but I think that using duct tape and a paper clip both in tool making deserves gold braid to go with your MacGyver badge. I wonder if anybody ever tried to button something with the parcel hook on a SAK? Best wishes. G

-

Now I never thought of the parcel hook, it maybe too thick, depending on how tight button is to fabric and also size of button hole.
Now I am curious.
The one I made last night, went home with the young lady!
Had to locate a second large paper clip and then duplicated my project for the pictures. Also, shirt was from my summer clothing collection😜
-
@LoopCutter said:
Day 30 follow upAs mentioned I did finally had a need for the paper clip (large) and duct tape.
As I shared at daughter’s last night for dinner, a friend of granddaughter visited, right wrist and hand in a cast. Result of a fall this past weekend.
She shared that she needed to get up early so her sister could button her work shirt and her fingers were still numb from the injury.
I told her I could help her and did reshape my paper clip, while she rolled her eyes, and granddaughter said hold on he is sometimes clever in strange ways.
I then unrolled the tape about 4 inch’s and then laid the reshaped clip onto the tape and then roll it up.
This is a make shift button threader, can be used to pull a button through the hole, to fasten. Or, can guide a button out of the hole to unfasten.
You're a genius! I wish I had thought of that when I broke my hand.

-
Day 30
[attach id=0 msg=2529514]
-
Beautiful. Your first 30 day challenge badge. Was it fun? Best wishes. Gary

-
Some really cool 'Gyvering this month. I'll probably keep carrying the duct tape card, and I just left the paperclip on there. As awlways, an SAK challenge is nice. I own however many bigger, flashier, more "professional" multis, but I'm happy to carry a nice Huntsman or something 90% of the time.
Day 30
One of my few SAKs older than MacGyver, this Angler?Fisherman? has the file phillips. Would probably convert off of team corkscrew if Vic brought them back.
Thanks for hosting RP! See a bunch of you over in the Green challenge tomorrow.

-
👍 that is a nice feature BPRoberts. I have not seen that feature, EVER!
-
@LoopCutter said:
Day 30 follow upAs mentioned I did finally had a need for the paper clip (large) and duct tape.
As I shared at daughter’s last night for dinner, a friend of granddaughter visited, right wrist and hand in a cast. Result of a fall this past weekend.
She shared that she needed to get up early so her sister could button her work shirt and her fingers were still numb from the injury.
I told her I could help her and did reshape my paper clip, while she rolled her eyes, and granddaughter said hold on he is sometimes clever in strange ways.
I then unrolled the tape about 4 inch’s and then laid the reshaped clip onto the tape and then roll it up.
This is a make shift button threader, can be used to pull a button through the hole, to fasten. Or, can guide a button out of the hole to unfasten.
[attach id=0 msg=2529507]
the tool
[attach id=1 msg=2529507]
insert through button hole and grab the button.
[attach id=2 msg=2529507]
pull the tool and button through hole. Slide tool from under button.I have finger dysterity issues myself and have a few of store bought items laying around the house. But, a pain if traveling if I forget to pack one and the paper lip idea helped my last trip. The tape makes a better option to grip. 😉
Very ingenious LC

-
@LoopCutter said:
👍 that is a nice feature BPRoberts. I have not seen that feature, EVER!According to the wiki, it was a thing from sometimes in the 50s to the 70s, so a narrow enough (and old enough) band that they're not super common. That knife also has the clip point blade and metal tabbed tweezers. I think the only major 91mm tool version that I don't have any examples of is the long nail file. Maybe someday...

-
Day 30:
I feel like I didnt accomplish much this month with my SAK, tape, and paperclip. I used my various SAKs every day, used the tape a few times, and never needed a paperclip for anything outside of clipping papers at my desk. Its been a fun one and I'll see many of you tomorrow for Green Meanie.
[attach id=0 msg=2529541]
-
Got to remember that the real MacGyver didn't disarm a thermonuclear device, rescue a spy from a gulag, or fight a giant in a fake sasquatch suit every day either. He only saved the world once a week on CBS. The other six days of the week he taught school. Pretty heroic in a different way. Different sort of challenge doing that. Same requirements. Be prepared for anything. Think on your feet. Don't give up in hopeless situations. That's a hero. Best wishes. G

-
Day 30
My trusty Spartan was the main SAk for this challenge and did not use the paperclip or duct tape. I did come closer to using the PC for its intended proper this week, but ended up not needing to Auth the papers I was organizing. BUT. I think i will carry both our add to my EDC for when the time arrives.
This was a fun challenge and I enjoyed the ingenuity of many of you. Good stuff.

-
@gra_farmer said:
Your posts were quite off the wall
I was close to wetting myself with laughter a few times

They were great reads.@MTSAK said:
Day 30:
I feel like I didnt accomplish much this month with my SAK, tape, and paperclip. I used my various SAKs every day, used the tape a few times, and never needed a paperclip for anything outside of clipping papers at my desk. Its been a fun one and I'll see many of you tomorrow for Green Meanie.
[attach id=0 msg=2529541]Nice carry
@LoopCutter said:
Day 30 follow upAs mentioned I did finally had a need for the paper clip (large) and duct tape.
As I shared at daughter’s last night for dinner, a friend of granddaughter visited, right wrist and hand in a cast. Result of a fall this past weekend.
She shared that she needed to get up early so her sister could button her work shirt and her fingers were still numb from the injury.
I told her I could help her and did reshape my paper clip, while she rolled her eyes, and granddaughter said hold on he is sometimes clever in strange ways.
I then unrolled the tape about 4 inch’s and then laid the reshaped clip onto the tape and then roll it up.
This is a make shift button threader, can be used to pull a button through the hole, to fasten. Or, can guide a button out of the hole to unfasten.
[attach id=0 msg=2529507]
the tool
[attach id=1 msg=2529507]
insert through button hole and grab the button.
[attach id=2 msg=2529507]
pull the tool and button through hole. Slide tool from under button.I have finger dysterity issues myself and have a few of store bought items laying around the house. But, a pain if traveling if I forget to pack one and the paper lip idea helped my last trip. The tape makes a better option to grip. 😉
So was the little girl happy. I know as a little one, I would have loved something like that especially considering it would help be more independent while injured.
-
Day 30
My outdoor Farmer X Spydernox accompanied me when setting up my Cape tent.
-
Day 30:
Last day, with a week Wenger that is no more (Victorinox Evo)
[attach id=0 msg=2529558](Edit: picture was take in time, but I fell asleep with the post half written and not sent xD)

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login