powerlock owners club,
-
That awl is a good one Dan! It definitely gets it done!
-
Thanks for the feedback Farmer.
I can attest that the SOG awl is one wicked little beast; I've used it on coconuts and, thanks to its length, makes having fresh coconut water a breeze!
-
Well, I was not ready for Barry's challenge (to which I'm still very sorry about not participating) but, I am for Farmer's !!!
The handle finally arrived, and went quickly to work to have my custom Powerlock Traveler (seen here with my very first PL, a black oxide B61).
[attach id=0 msg=2529730]
Inspired by JonesE, I built it using a Powergrab's pliers head and let me tell you, what a gamechanger: with only a small modification to the PL's handles, and you gain: a pommel, a magnetic bit driver, a true needlenose tip, and a sleeker appearance, and all without loosing nothing but the cap crimpers (but you will still have anvil style crimpers so, nothing big for me).
[attach id=1 msg=2529730] [attach id=2 msg=2529730]


-
Juan that's great!!

-
Due to my work, I need to have bladeless tools at work so, decided to copy the S61TR down to the robertson but with a kick: I added the v-cutter and, since the small flat driver from the can opener was broken, reprofiled the opener to a full blade one; the rest of the tools is standard SOG affair. My only gripe is that I might look for an early, round tipped file, as the spare one I had is of the scored-lines-type and is almost useless (good for my nails though!). So far, it has rekindled my likeness to the PL series, and will probably be replacing the Bladed Bladeless for work EDC. [attach id=0 msg=2529732] [attach id=1 msg=2529732]


-
Thanks Barry!
-
Juan, your modded PowerLock looks fantastic. Great job with the mod. It is always fun to make a tool your own.

JonesE
-
JonesE, Barry, thank you!

-
Those are some really cool mods, Juan. And I'll be looking forward to hosting a Power challenge; that will probably be late this year or early next year. That gives me plenty of time to add more SOGs!
-
Thank you, Farmer.

-
I've gotten a little more experience with the PowerLock, and one thing I'm not overly fond of is the way the scissors are set up.
[attach id=0 msg=2531921]
The thumb lever is oriented so that it is more or less right up against the opposing handle. (I hope that made sense.) Such positioning makes pushing the thumb lever a bit tricky. I'm almost better off deploying the pliers when I want to use the scissors. If anyone has suggestions for a work-around, I'd be interested to hear them. I'm thinking the scissors will move out to make room for a V-cutter.

-
Farmer, after I read your impressions, I went back to my Powerlocks and, sadly, found no other more-comfortable option. I seldom use them and not for long, and hadn't noticed it but you're right; if pushing against the end of the lever/handle, it gets cumbersome as the thumb hits the tool's handle end; if pushing closer to the fulcrum, not enough force is produced amd is uncomfortable for the thumb, and if turning the tool to push with the index finger, it is awkward and uncomfortable. So, yes, I think there's no way around it.

-
Juan, I think you're right. I can sorta understand why SOG engineered it that way (so the scissors don't have to be unfolded a la a Wave or Suspension NXT). Deploying the pliers while using the scissors is probably the best option for now.
-
My bladeless is proving itself today; my washer's lid switch burned in mid chore and I have a lot of laundry to do: pliers cut jumper wire, integrated bit driver removes back cover screws, file pushes cabin clips, and the v-cutter becomes a great wire stripper; needlenose helps in winding wire ends and once jumper 's in, laundry resumes!
[attach id=0 msg=2532254] [attach id=1 msg=2532254] [attach id=2 msg=2532254]


-
Well done Juan!
-
Thanks! Glad I was able to hack it and have it back, as I was just starting laundry, and that it was such an easy fix! :D
-
Wow, super cool Juan. You dang near used every implement on your PowerLock. Good job.
JonesE
-
Thanks, JonesE, I almost did; too bad the washer didn't came with Robertson screws
!

-
HACK UPDATE!
seeing how the jumper worked, decided to take out the burnt connector, clean it, and reprofile it to become a solid jumper, protected by the OE housing. Worked great! This time, only the pliers and the file were used. [attach id=0 msg=2532276]
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
