Spirit owners club
-
@matzesu said:
Whe do Beekeeping, yes, raising did they by themself, there are quite independent Animal ^^How often should i check the Screw from my Clip? Now 2 weeks after i got the Tool, its seems to hold up quite well,
its also said the Metall on this Screw is not the best so i have to take care not to "screw it" ..If you are concerned about the screws coming out, possibly use some blue Loctite on the threads.
-
Good day to have a Spirit on me. We went to replace our grill and the new one was just a tad too tall to clear the back of the van. So, used the Phillips driver to separate the grill portion and leg base.
I then used it to disassemble the old grill for the dump. Used the Phillips driver to remove all the screws, scissors to clip the gas line zip ties, and pliers to pull them out.
[attach id=0 msg=2531763]
[attach id=1 msg=2531763]


-
Great job GB! Those scissors are great for cutting thicker things like zip ties.
-
Luckily Spirit had all tools needed GB

-
Great summary of your SPIRIT’s accomplishments!
And, just imagine how much that tool resembles a fine piece of art. A excellent piece of form and function in today’s world. 😎
-
Thanks, awl. It’s a piece of art and a solid tool for sure. My Spirit XC has seen a fair amount of work in the short time I’ve had it and it holds up like new. Vic didn’t invent the PBMT but certainly took it to the next level.
-
Very nice use...it is still one of my favorite MT' s out there...near perfect tool set and beautiful to boot!
-
It has everything I can think of, especially with a bit kit and corkscrew. I've used it a bunch of times out in the woods. It has a look and feel all it's own. There's an online vendor who calls it the Ferrari of multitools. I wore mine to work last night. -
I wonder if i get any benefits Pocketcarrying the Spirit X, and my Huntsman together? , Booth have about the same Toolset beside the Hook and the Huntsman is a bit more confortable to hold during Blade Work, its not like the Huntsman adds Metric Tonnes of Extra Weight..
-
That is one question you must sort out for your own!
The Huntsman lacks a pliers combo.
But you said you carry the bit kit in and EDC pouch.
I during the summer months will carry my SPIRIT, or REBAR or SIGNAL in my CrossBody bag. A SPARTAN in the pocket.
Yet, I always try my best to have a Plier kit within reach.
There is no wrong or correct way!
-
So from the Logic its dosnt make much sense, the Spirits got every Tool and more the Huntsman got, , from an SAK Fan Perpespictive, its make sense as i have now also this nice Blue Huntsman whit me and the awesome Swisstool ..
An Different Idea where to take the Pioneer X Alox and the Minichamp whit me, this is a much nicer SAK as the Huntsman Plastic Bomber ..
-
@LoopCutter said:
That is one question you must sort out for your own!The Huntsman lacks a pliers combo.
But you said you carry the bit kit in and EDC pouch.
I during the summer months will carry my SPIRIT, or REBAR or SIGNAL in my CrossBody bag. A SPARTAN in the pocket.
Yet, I always try my best to have a Plier kit within reach.
There is no wrong or correct way!
no right or wrong way matzesu. I typically carry a Spirit XC with the serrated blade something with a plain edge is helpful. An alox Solo or a Waiter is a great combo without any overlap. Or go big with the non Alox Solo that has the 108 or 111mm blade. If you can find it the Alox 2 with the hawkbill blade is also a good add to the spirit. -
Well i think i go now for Spirit X, ROXON Flex Companion whit Scraper, Hook Blade (Belt Cutter), Comp, and Ruler, and my Minichamp whit the Blue Scales and booth Scale Tools .. ,
The Spirit is an SAK on his own, even whit Korkscrew .. , the only stuff its dosnt have are the Scale Tools ..
-
@matzesu said:
Well i think i go now for Spirit X, ROXON Flex Companion whit Scraper, Hook Blade (Belt Cutter), Comp, and Ruler, and my Minichamp whit the Blue Scales and booth Scale Tools .. ,The Spirit is an SAK on his own, even whit Korkscrew .. , the only stuff its dosnt have are the Scale Tools ..
I would only carry the Spirit if it has scale tools. A ruler would be nice. I’ve seen some mods of snap on adds for the swisstool to hold scale tools and laser etched ruler on the saw. My brother in law has a laser and I’ve always wanted to give it a shot.
-
We had some water coming from beneath the kick back under the sink. Nothing is leaking so now we think a kid spilled some water and it just looked like a leak. That meant I had to pull off the kickback and then reattach. Out comes the hammer and Spirit. I also got to use my new Olight pen with the pencil nub to mark holes to see them better. The graphite doesn’t reflect light as well as a carpenters pencil so didn’t really help marking the holes.
[attach id=0 msg=2532196]

-
As this Pocket Carry Clip for my Pioneer X Alox is not that secure, i did decide to carry only the SpiritX and the Roxon Companion, they have all the same Toolset, and the Blade on the Spirit is even Lockable ..
This new Knifelaw in Germany dosnt allowed any knife in Weapon Prohibition Zones or Trainstations anyway, so its dosnt matter if its Locket or Not, only for my own Working Security because Victorinox Blades are quite sharp despite the Knifes are the most friendly Knifes you can get.. -
Spirit and bitkit
[attach id=0 msg=2532686]

-
Very nice!!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login