What tool did you carry today?
-
Lately I've been leaving my shabby SAK at home more, and when I need pliers I take the trusty Gerber, but when I don't want to burden my pockets, the rusty old Scout knife, because it does have a decent phillips screwdriver. Shown here but not carried, is a wrench I was reminded of by a post upthread about Bahco Swedish adjustable wrenches. Way back in the wayback days, SAAB cars carried a tool kit (as did Peugeots, whose kit was superb, as you'd expect since Peugeot was a major tool manufacturer), and in it was a rather nice Bahco wrench. It's rather unusual in that its handle is a small tire lever! I can''t quite imagine that being very handy on a car tire especially since there was only the one, but there it is. The post above reminds me that I should brush this one up a little and throw some oil at it.
[attach id=0 msg=2533340]
e.t.a. little known trivia. For some odd reason, back in the 1960's Saabs used SAE threads and bolt sizes, rather than metric. I never found out why. And an addtional bit: this wrench reads "Volvo" on one side, but I know for sure that it was originally in the tool kit for a 1961 Saab!

-
@bruto said:
e.t.a. little known trivia. For some odd reason, back in the 1960's Saabs used SAE threads and bolt sizes, rather than metric. I never found out why.Bruto, Aerospace fasteners were commonly SAE during this time period. Saab also produces aircraft so this is probably why you see SAE fasteners in older Saab cars.
JonesE
-
That makes sense. My dad had a couple of the old "cornpopper" Saabs (two stroke,three cylinder) back in the 60's, when Saab was still quite actively an aircraft company. I did some of my driving learning on the '61, which was quite an interesting car. Because it had freewheeling, you could pass going down a hill at idle. It was also notorious for understeering. If you tried to power through a turn, it would plow straight ahead, but if you backed off the gas, it would pop back into line. Later he gave his first one to my sister, and bought a '65, which had its own quirk: it blew smoke rings at idle. We also discovered, owing to a mechanic's mistake, that if you adjusted the timing in the wrong direction, the engine would run backwards. Unfortunately the other thing we learned was that the roller bearing bottom end could fail suddenly and catastrophically. The transition from "funny noise" to "tow it to the junkyard" was negligible.
The manufacturer touted the simplicity of its valveless engine, with "only seven moving parts." Seeing the ad on TV one night my dad remarked, "yeah, six squirrels and a cat with a whip."
-
Today with Passenger & Flatiron
[attach id=0 msg=2533480]

-
All this in my pockets (besides the little tool with 3D printed scales I'm assembling).

-
Got back from overseas on Tuesday and was asked by my mate to help do some stuff (her husband is laid up up in bed with a knackered back)
I used my mini rachet type thing & universal socket to sort out their garden lights and then my Oknife (courtesy of Grant & the Maxpedition GAW) to open the packaging on their new under counter fridge-freezer)
Awl went well



-
Today solo carried my SwissChamp
[attach id=0 msg=2533868]

-
-
Great Pic Antti. Really like your lanyard on the SwissChamp.

JonesE
-
The landlord is replacing the windows so I had to remove smurf in order that it didn't get in the way.
The front bedroom now has new windows so I replaced some floating shelves assisted by the Ratchey and Slicey things (this is a good combo)
I suspect when we move out it will be a go to set up (awlso has a Vic' MT & various other bits ;))
Have a great rest of weekend awl



-
Finally talked myself into buying the Multiforce today at Walmart, and putting a garden cart together, already heavily used the pliers, serrated blade, and scissors.
Used to be, inexpensive multitools sucked Poor steel, barely functional tools, and terrible fit/finish. Not anymore. I actually like this one, and typically, I'm a bit picky.
I'd argue the Multiforce is 80% of the Wave in quality at maybe 30-40% ($40 vs. $120 @ MSRP, and $100 on sale) of the cost. Plus, you can stick standard bits in it without an adapter, or even rob the bits out of an inexpensive 10-in-1 driver. Saw cuts great, scissors are every bit as good as the Waves, and the file is actually functional for once (files seem to be among the hardest tools to get right on cheap multis) and the diamond side is really coarse for quick sharpening of gardening tools when I leave my Diafold at the house. And the blades are very sharp.
Sheath, however--get a decent one. While it has a belt/waistband clip--it's flimsy.
[attach id=0 msg=2533889]

-
Good stuff guys!
Carrying two of my relatively new used acquisitions: Cybertool and Free P4. The watch is another of my own builds.

-
Some great carries lately, y'awl!

-
Today carry SwissChamp
[attach id=0 msg=2534445]

-
Two tools
One is 33 years old. The other one is new.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



