powerlock owners club,
-
Nice wat to describe it, Farmer, and I've also found that the pull method works better.
-
And I've been pretty impressed with the PowerLock thus far. It's scarcely left the "fifth pocket" of my Carhartts since it arrived! -
Outstanding!
-
I'm glad you like the PowerLock. It is a work horse.
-
Here's another reason why I really like my Powerlocks. Out of ALL my handtools (including my hoarding of KBMT's and PBMT's), the one driver that fitted like a glove in the pivot bolt of my "new" Champion was the one from the can opener/driver combo from a Powerlock: no play, right size, as if made for it; loved it!

[attach id=0 msg=2533878] [attach id=1 msg=2533878]

-
Very cool looking PowerLock Juan. I really like the black oxide handle with stainless tools and hardware. Glad the small flat driver woks on your Vic.
JonesE
-
on awl counts! -
Thank you both, JonesE and Farmer, for your kind words and support.

-
This one is due for a

I cut up another old T-shirt today. The PowerLock's scissors didn't work well on the fabric. That's not an entirely surprising result, as it's been my experience that they work best at the tips. Generally speaking, scissors cut best on fabric when it's close to the pivot.
[attach id=0 msg=2545142]
The blade did better, but it left a lot of stray threads. I suspect the serrations weren't designed with old T-shirts in mine. There is not a doubt in my mind that I would have had better results with a plain edge.
[attach id=1 msg=2545142]
I am still planning on swapping out the scissors and blade. And I still like the PowerLock quite a bit.

![PowerLock_Owners'Club_27_September_2025(1)[1].jpg](/assets/uploads/_imported_attachments/migrated/590911_PowerLock_Owners'_Club_27_September_2025_(1)%5B1%5D.jpg)
![PowerLock_Owners'Club_37_September_2025(2)[1].jpg](/assets/uploads/_imported_attachments/migrated/590912_PowerLock_Owners'_Club_37_September_2025_(2)%5B1%5D.jpg)
-
on both Dan. The scissors aren't bad, but not Vic's. -
Hey Farmer, It is great to see some one posting about their PowerLock. Great test today with the shirt.
JonesE
-
Thanks, guys!

-
Sharing my newest addition to my PowerLock family. Hoping if you know what model number it would be would be appreciated. This one does not have the scissors, 1/4” driver, or v-cutter. The large tool load out is, plain blade, serrated blade, saw, and three sided file. The small tool load out is bottle opener, large flat driver, can opener, Philips driver, and awl. I got lucky on this one, don’t think it was ever carried. Only blemish I could find after cleaning and lubing the pivots was a small scratch under the O on the handle with the SOG stamp.
JonesE
-
That sheath looks good too! Ones in that condition seem to be harder and harder to find these days.
-
Thanks Barry, I think I got lucky on this one. This was an opportunistic pick up. I am happy to have it. I got another one coming so stay tuned.
JonesE
-
Kudos on such a nice find JonesE! It looks like an early S/B60; here's a link to a B60
PowerLock Ver.1 B60 - ONLYSOG
As one of the original multi-tools manufacturers, we have learned quite a bit over the years. Like how to make the toughest tools with patented gear driven compound leverage mechanisms. You have let us know, that quick access is a must. Just flip our tools out with one hand and see for yourself how well we[...]
ONLYSOG (onlysog.com)
-
@Juan el Boricua said:
Kudos on such a nice find JonesE! It looks like an early S/B60; here's a link to a B60
PowerLock Ver.1 B60 - ONLYSOG
As one of the original multi-tools manufacturers, we have learned quite a bit over the years. Like how to make the toughest tools with patented gear driven compound leverage mechanisms. You have let us know, that quick access is a must. Just flip our tools out with one hand and see for yourself how well we[...]
ONLYSOG (onlysog.com)
Thanks Juan, That matches exactly what I have except for the black oxide. It gets confusing since when I checked the MTO wiki it lists a S60 as having partial serrated blade, scissors and the 1/4 adapter. The S61 is listed with cap crimper which mine has. In the end, it is in stock configuration, it just may not have a model number. Thanks for looking and providing a link.
JonesE
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

