Victorinox 91mm Tools Evolution
-
Double cut file on 84mm from 1950s. Shown in FB group [emoji15]


-
Very nice duo!

-
Nice example! We probably need an 84mm Tools Evolution thread!
-
@MiniChamp said:
Back to 91mm: Since I don't recall ever seeing a 91mm SAK with a Phillips + crab-claw can opener combination (and since you didn't say anything on that), I believe that if such SAKs exist, they are very rare. Hence, it seems extremely unlikely to me that 91mm SAKs with a Phillips SD existed (other than prototypes, maybe) at any time before 1950.The problem with this logic is that it assumes pretty heavily that Phillips were as numerous as corkscrews when they first went into production. With 84mm crab claw knives, it seems pretty clear that they were less than say 20% of total production in that timeframe...perhaps less than 10%.
I was pretty sure I've seen them on 91mm...this one is from a post by jnoxyd earlier this year:

Not sure if it's his...a friend's...or just a pic that was archived.

Regarding the type designations, I think the '2a' phillips should really be '1b' and the '1b' should be '1c' based on the forging and metallurgy and chronologically when they first show up. Perhaps 1a and 1b should actually be placeholders 'pwar' and post '51 versions that should have the angled draft. 2a should be the no can-key and 2b should be the can key, etc.
I also don't know if I mentioned that my US.PAT.PEND 84mm is double cut too.
I'm just gonna throw this out there...has anyone considered that the 1b style could have also been used on purpose between the 2b and 3? Two unrelated production changes I'm tracking point in this direction. I expect use of the 1b type after that was to dispose of existing stock in advertising and Hoffritz knives.
-
Nice one Kamakiri

-
@kamakiri said:
I was pretty sure I've seen them on 91mm...this one is from a post by jnoxyd earlier this year:
??? This image shows an 84mm (more precisely, 83mm) SAK, so...?!?!?!

Regarding the type designations, I think the '2a' phillips should really be '1b' and the '1b' should be '1c'...
The core 1-5 type designations come from SAAM's 91mm Tools Evolution site. I doubt if it would be a good idea to introduce incompatible type designations that are based on a different methodology.
-
Hi guys. I am going to fresh a bit this thread talking about modern variant of the Ph SD (v.5 by this thread classification).
As I have detected there were two sub-variants of it (5a and 5b :))
Profile of 5a variant (it is green at the picture below) had different convergent angle of the planes, smooth tip of the SD. The tip of 5b variant (it is red at the picture) is flat like tiny cross, and has another variant of planes convergent angle.
At the photo you can see both variants of SD: modern one (5a) is on the left side, the most modern one (5b) is on the right. Maybe the photo is not presentable enough, but in reality you can distinguish them easily if you compare two knives next to each other.
As I could detect, the conversion happened approx. in 2002-2005. At the least, I have not seen 5a SD on knives produced later than 2005 and 5b one before 2002.

-
@MiniChamp said:
Yes!
Cool!
Thanks! 
Finally got MiniChamps brilliant Phillips evolution diagram in the Wiki - Apologies for the delay
https://sakwiki.com/tiki-index.php?page=Screwdriver-Phillips
... via a link on the page -
Hi Huntsman! Maybe it’s better to post it right on the page instead of this group photo? Just my thoughts.

-
I hate you lot - >:( - Giving me work to do - Then I do it - Then you make me adjust it (ref Nemanja recently)

However I do agree with you -
Although I had a problem putting it at the top of the page, as that is a generic section and the diagram is Vic- So I put it in the Vic section - But removed JBs image from the top anyway - as it is awlready on the page in an enlarged version below (and also is Vic specific !! ;) )
What do you think? It's a little cramped -
I however want it to be 'perfect' - So still happy to make further changes - Despite the comment above ;)
-
Make SAKWIKI Great !
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login