Is something coming...?
-
David, I just wanted to follow up with you and see if you were able to get your pivot adjusted to your liking? For the blade rubbing the handle, here is a trick I learned many years ago to help center the blades on a Benchmade. After you have the pivot adjusted to your desired tension. Open the knife and make sure the blade is locked. Point the knife away from you with the spine towards the floor . Firmly grasp the handle. Then carefully flex the blade in the direction that it was contacting or closest to the scale. This will shift the blade over. Close the blade and recheck the center. You may need to do this a couple of times to get it to center.
JonesE
-
Here's the teardown, the liner spring is on a pin and tucked under part of the handle. The lock itself is solid and it sits in front of the spring. I honestly thought stuff was held together etc but no it's just machined tightly. I have not resolved the blade rub and I've tried a few things to no avail. I'll continue to tinker and see if I can remedy things. Other than the blade rub I'm growing to love the knife.
[attach id=0 msg=2537805]
[attach id=1 msg=2537805]

-
Put a gut hook on that thing and it'd be a great hunting knife
-
More on possible wave alpha
https://m.youtube.com/watch?v=YBdiEwVuKks -
A thumb stud for opening on the blade instead of the cut out. Interesting. Best wishes. G

-
LM's hole implementation has never been as good as Vic or Spydie's, but that stud doesn't look very handy...
-
@BPRoberts said:
LM's hole implementation has never been as good as Vic or Spydie's, but that stud doesn't look very handy...I actually prefer the hole because thumb studs can get in the way. Although, I'm not minding the thumb stud on the Arc.
-
Yeah, I'm also pro hole. Just wish we could get a rounder one.
-
@cdcengineer said:
More on possible wave alphaThis video is pretty interesting - The guy is talking about the new Wave as if this is actually how it will be
Whereas, all it is based on is a Reddit image ???
Although the image looks pretty genuine and I guess the speculation has been around for a while!I was also puzzled by the Magnacut blade - as I thought that was reserved for premium models
-
@Huntsman said:
This video is pretty interesting - The guy is talking about the new Wave as if this is actually how it will be
Whereas, all it is based on is a Reddit image ???
Although the image looks pretty genuine and I guess the speculation has been around for a while!I was also puzzled by the Magnacut blade - as I thought that was reserved for premium models
I was wondering the same thing. The market is so flooded with cheap multitools, I suspect that Leatherman is putting a lot of focus on premium tools. Hopefully they will continue to make new, more affordable tools as well.
-
I think we have to see the Wave Alpha as a Charge replacement rather than a direct Wave+ successor.
That would explain the premium steel.
The rumours I saw months ago mentioned three new members of the family called the Alpha, Sport, and something else. -
Many social media comments have hypothesized that the supposed "leak" of the Alpha Wave pics was timed to distract from the almost universal thumbs down on Leatherman's recent knife release.
I don't like being Mr. Grumpy, but if the Alpha is a Wave/Charge with Magnacut and G10 for $300, its another yawner.

I recently bought a NexTool S11 Pro (pics in the Reviews forum) which is more or less like the former Leatherman PS4. It was $29 with excellent design and manufacturing, and gives me more fun and leg tingle than another super-spendy MT.
Even so, I may be like Brother Rich and buy one anyway.
:ahhh -
@powernoodle said:
Even so, I may be like Brother Rich and buy one anyway.
:ahhhGuilty as charged

I’m actually more interested in the new scissor design for the Wave. I assume it’s going to be a slightly smaller version of how the Surge is set up. If that’s the case, they’ll have to remove one of the larger tools, and it better not be the diamond coated file

-
It's weird, and kind of disappointing, to see Roxon and Nextool slowly turning into the next big multitool companies. At first, it was just nice to get half decent budget tools, and rerelases of old designs that the other companies had retired. But now they're starting to actually innovate (double plier/scissor tools, modular flex, etc.) more than Leatherman too. Gerber's still chugging along with their small/speSmurfpillst multitools, but their last big release was the Dual Force years ago.
-
Assuming that these are not fake, what do you think? I love the change to the scissors, but I'm not happy with it replacing the serrated blade. I would had rather lost the saw. That said, it's much better than losing the diamond-coated file. The addition of the awl is very cool too! Overall, I really like it, but nothing I need.


-
Well, I think it looks like a worthy successor to the Charge G10. And Wave Plus. Are we going to be loosing the Titanium scales from the Charge TTi? I am good with loosing the serrated blade to gain upgrades scissors like the Suge. I am sorry, but I still don’t get the point of having powdered high end blade steel in a Multitool. 420HC works very well with its easy sharpening.
JonesE
-
According to the original rumors (that appear to be legitimate now), there will be several versions of the Wave. The lower-end Wave will likely keep the 420HC blade. The Wave "Alpha" is supposed to be the high-end Wave which is really what the Charge is now.
-
Ok, so the Charge name is going away. I guess Leatherman feels that the Charge name is confusing potential customers and wants to simplify the wave series. I am glad you stated the Wave will have an entry level model. My first real Multitool was the first generation wave back in 98.
JonesE
-
If those pics are real, it’s absolutely the tool that I have been waiting years for them to make.
-
@JonesE said:
I am sorry, but I still don’t get the point of having powdered high end blade steel in a Multitool.In my view, it is marketing and geared toward the pocket jewelry purchaser. You will not be seeing these on the job site, largely because The Workin' Man doesn't want to abuse and lose a $275 MT.
Subject to more data and less speculating on my part :ahhh, the G10 Wave pictured is not that much different than the OG Supertool and Wave. At least in terms of overall function. Plier, knife, drivers, etc.
It is somewhat akin to Glock introducing a new generation every few years, where it recycles "features" like finger grooves, grip pattern or rifling that it previously implemented and removed. Its always basically the same Glock, with superficial tweaks. My Gen5 G17 is almost indistinguishable from my Gen 2. Same with Leatherman. Superficial tweaks to the same basic MT that has been around for 30 years.
But Leatherman, Glock et al., have to do this to (appear to) shake up the market, just as your local supermarket completely rearranges the interior layout from time to time. They do it because it works, though the food (or the basic Glock or MT) remains the same.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login