111mm Super Club
-
Nice one Gareth

-
One hand sentinel I made wood scales for a few years back.

-
Second 111mm and love it. First one 2 layer cheese knife, great as well. Best layer in outrider maybe scissors plus small phillips. Understood this is a smallest 111mm with scissors. I would get 3 layer if would be available. So without a saw. As for edc really not must. For outdoors usually have more then edc.
Second great upon 91mm is larger locking flat. So with blade and flat these are reasons to update from 91mm to 111mm for me. You can do same. But with this I feel can do same thing better. So size does matter. But still for me Ok size to pocket carry. Actually better then expected. So have only one tool. I have carried larger blade and smaller keychain tool. But this as one tool to replace two seems to be easier carry. Even maybe more weight then example cheese knife plus LM squirt.
Plus as well that blade is not at edge. Without saw it would be in middle. Now almost middle.
But why 4 layer is Ok? Cork screw is with saw. And for that can get a fire ant kit. Back of the saw is great to fire a fire stick. So this fourth layer, saw plus cork screw is actually quite good add on. For bushcraft. So for those tasks this is a good carry.
For my edc can opener tool to look next. Emergency larger phillips. Could be better for that. Wenger style opener better to work as package opener. Small flat should be small so this is not great but will do in some cases. One thing it is great for is to snap open things. Add image from this. So no need to use blade. One big plus with multitools that no need to risk a blade to tasks.
So overall. Very good set of tools. And a longer size will make tasks easier as simple as cut bun. Still with EDC want to have scissors. So outrider is quite much best option have found. And sure will get a lot of usage.
Lähetetty minun motorola edge laitteesta Tapatalkilla


-

@temo said:
Second 111mm and love it. First one 2 layer cheese knife, great as well. Best layer in outrider maybe scissors plus small phillips. Understood this is a smallest 111mm with scissors. I would get 3 layer if would be available. So without a saw. As for edc really not must. For outdoors usually have more then edc.Second great upon 91mm is larger locking flat. So with blade and flat these are reasons to update from 91mm to 111mm for me. You can do same. But with this I feel can do same thing better. So size does matter. But still for me Ok size to pocket carry. Actually better then expected. So have only one tool. I have carried larger blade and smaller keychain tool. But this as one tool to replace two seems to be easier carry. Even maybe more weight then example cheese knife plus LM squirt.
Plus as well that blade is not at edge. Without saw it would be in middle. Now almost middle.
But why 4 layer is Ok? Cork screw is with saw. And for that can get a fire ant kit. Back of the saw is great to fire a fire stick. So this fourth layer, saw plus cork screw is actually quite good add on. For bushcraft. So for those tasks this is a good carry.
For my edc can opener tool to look next. Emergency larger phillips. Could be better for that. Wenger style opener better to work as package opener. Small flat should be small so this is not great but will do in some cases. One thing it is great for is to snap open things. Add image from this. So no need to use blade. One big plus with multitools that no need to risk a blade to tasks.
So overall. Very good set of tools. And a longer size will make tasks easier as simple as cut bun. Still with EDC want to have scissors. So outrider is quite much best option have found. And sure will get a lot of usage.
Lähetetty minun motorola edge laitteesta Tapatalkilla
-
I can say this chisel ground in cheese knife does cut better then normal. Sure half serrated as well will help. But also straight part one sided. Usually avoided these but seems to work very well for some tasks. I could think easy to sharpen as well. Yet no need to.
Lähetetty minun SM-F721B laitteesta Tapatalkilla


-
@temo said:
I can say this chisel ground in cheese knife does cut better then normal. Sure half serrated as well will help. But also straight part one sided. Usually avoided these but seems to work very well for some tasks. I could think easy to sharpen as well. Yet no need to.Lähetetty minun SM-F721B laitteesta Tapatalkilla
I really like Victorinox style to make half serrated blade, usually serrations are near tang but Vic did 2/3 to tip. its much easier to whittle when near tang has straight part but still have serration
-
Only 1 missing from 1st badge

Only Tools Matters
-
So close!

-
Close yes, I still 3 short if five needed. Maybe check models what am I missing :)
-
Great bump and nice Forester!
-
-
My second Hercules, even tho its used blade is sharp and tools snap nicely
[attach id=0 msg=2564515]

-
Mighty Hunter!

-
This is a very cool model! Honestly, a OHO version of this without the saw and with the Skipper Pro marlinspike would be practically my perfect 111. Although, I don't like the fact that it's a choice between the full-size cap lifter and the small gutting blade. If there were a way to get both of those in the same tool I'd jump on it. So, a full-size cap lifter, a small gutting blade, a OHO blade edge, and a Skipper Pro marlinspike (or maybe just a regular marlinspike — the Skipper Pro one adds a lot of width...). I don't think I appreciated the 111s enough but I'm really starting to love them. I don't own any of the 130mm models (yet), so the 111s are the largest I have with the exception of the Hunter Pro. Here's a photo of the width of the Pro marlinspike.


-
Wow - That marlin spike is a brute - And I had forgotten that it is liner-locking -
Although for that width and type of likely heavy usage - It would have to be- And of course the Wiki is correct!! ;)

That therefore makes three locking tools: Blade, Spike, Screwdriver - Which must be quite unusual
. - And of course the Wiki is correct!! ;)
-
Yeah, three out of the four frontside tools on this monster lock — three of five in total (since there's only the one backside tool, an awl). Honestly, I've been trying to think of a way that it would be possible to put the large marlinspike on the back of the tool. I'm sure there must be a way, but since it actually has three(!) backsprings, I'm not entirely sure whether it'd be possible. I really like it, though. It actually works very well as an icepick. The only issue with it is that the taper is actually so aggressive that it doesn't exactly do a great job untying knots made of thinner string; e.g. it doesn't work well for untying paracord knots. But then again it's been my experience that the standard marlinspike also doesn't do a great job at that. The best I've found is the scale marlinspike/sacking needle on certain alox models (like the Seaman, for example) or actually just the corkscrew — which is another reason I prefer the corkscrew to the backside philips.
-
My son has one and that Marlin spike is the real deal!!
-
@Tuisto said:
Honestly, I've been trying to think of a way that it would be possible to put the large marlinspike on the back of the tool.
I'm sure there must be a way, but since it actually has three (!) backsprings, I'm not entirely sure whether it'd be possible.Meet the ***British Army Knife *** made in the steel town of Sheffield in Yorkshire, UK.
This one has a 1943 tang stamp
The spike uses two springs and is about 9mm wide
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

