Sad SAK Saturday
-
Yes, a Voyager. Essentially a Climber with electronics & plus scales.
Eager to see it in person. Thankfully the seller offers a 30 day return as he/she didn't show the tools, so I'm unsure of its total condition. -
@FolderBeholder said:
On Sad SAK Saturday (yesterday), I bought this for $15 plus shipping. Hoping I can source a new shield. Unsure if I can get the clock window clean, but it seemed like a fun project. Not even sure if the electronics work yet.Fun find, FoBe!

-
The Voyager (Climber with electronic scales) arrived, but the electronics weren't good. The numbers were only half showing. The tools were in nice condition, so I did an easy clean and turned it into a nice Climber with Ruby Red Plus scales.

The bonus part was when I started a return, the seller refunded me and said to keep it. That's when I decided to do the clean and scale swap.
-
I thought of saying if the electronics were no good, it would be worth it to ship it to Victorinox. Then I thought what I would do, which was just change the scales. I didn't write that either, because I figured, "No way Lisa would just want another Climber. She probably has 20 now."
Just the way my convoluted mind thinks. It made a great Climber with just a scales swap. Well worth the price you paid. Even better now after the rebate. Very pretty. Best wishes. G

-
Thank you G.
It's my understanding that Victorinox doesn't warranty the electronics any longer which is why I didn't send it in.
I have put it into a go bag. I put new scale tools in it. I'll keep it, it's fun to have a free one. -
@FolderBeholder said:
The Voyager (Climber with electronic scales) arrived, but the electronics weren't good. The numbers were only half showing. The tools were in nice condition, so I did an easy clean and turned it into a nice Climber with Ruby Red Plus scales.
The bonus part was when I started a return, the seller refunded me and said to keep it. That's when I decided to do the clean and scale swap.Nicely done, FoBe!

-
[attach id=0 msg=2539682]

-
Above is not in bad shape just old like some of us!
I'm 70, found as a child in the attic, rhe knife not me. Def over 100 years old.
Pradel? France? Did they steal logos back then? Lol
Spartan tool set no scale tools. -
Nice one Tony. I like the colors a lot. Looks like a Victorinox cross and shield and maybe something a little like Opinel's crown on the blade. Maybe they borrowed a bunch of trademarks? Best wishes. G
:D -
could be the Opinel mark?
Guess I'm not supposed to clean it up, correct? Leave ancient as is
-
I am doing the plier based key chain thingie this month. I plopped this Spartan down next to the Swiss+Tech 6 in 1 tool for some scale. This was the stinky Spartan. It doesn't stink anymore, and there is just the faintest hint of Vitalis smell remaining. The aluminum liners in this Sad SAK are partially corroded, which makes a little gritty grating on opening. Then if you use something like a folded paper towel to sponge away the scraped off residue, it restores the smooth function. I never did get the blades completely straight, but they still cut just fine. I sharpened the can opener just a little with a little slip of Arkansas stone. Just enough to help it cut.
Best wishes. G
:D
[attach id=0 msg=2540109]
-
So, this one looked sadder when I first started cleaning it. Previous owner had left the batteries in there for who knows how long. Suffice to say that they leaked horribly and I tried to give it a baking soda wash with a brush. You can still see the corrosion on the bulb. I doubt the laser will work but I want to give it a try. Need to finish cleaning it up. Anyone know if I can find a replacement laser module?



-
Success!! It's not such a Sad SAK after all.
I was able to clean a lot of the corrosion off the laser module, by scrubbing it with a baking soda mix, brass bristle brush, and 400 grit sand paper. The lens shows a bit of damage when you look at it up close but it doesn't seem to affect it past 2ft. I'm pretty happy with the results. Not too bad for a $40 investment on an unknown condition knife.



-
Has to be a rare find. Congrats on the restoration. Best wishes. G

-
Had to do some repairs on two Vics this week. Spartan and Tourist. I finally got around to gluing on the scales of both.
I straightened the big blade on the Spartan and un-kinked the corkscrew a little. The cross side scale was loose as could be. I had previoiusly replaced the other scale, since the original was messed up from heat maybe? Might have been soaked in some solvent. The Tourist had both scales loose, and the cross-side scale was split. Both SAKs are up to snuff now. I had some Epoxy 330 on hand and used that. I tried to be careful to not goop up the scale tool slots but clogged them up on both knives. Used a thin spring steel probe to open them back up. All good. The Tourist toothpick is a little tight. Not too bad.
Best wishes. G
:D
[attach id=0 msg=2540645]
-
May I ask how you straightened the blade? I haven't had any success in my attempts.
-
That mostly depends on how it is bent. If it is twisted, or bent into an S-curve, there isn't much you can do with it. The Spartan had a slight bend to one side. I just pressed one end on a tabletop by hand and brought it back to straight. There is some chance of breakage, so you have to be careful not to ruin a finger.
I recently did a Wenger and it turned out okay. Not perfect, but some better. Also, another Spartan that had a tight S-bend. Didn't help it much at all, but still got it back to usable. I used a vise on that one.
Best wishes. G

-
Thanks, that is helpful.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login