Knife/Outdoor Store Visits Thread
-
Good timing for a thread like this!
This isn't my local Bass Pro, nor is Bass Pro my first choice for knives, but I'm here to meet a guy from Marketplace about a Cold Steel and a Victorinox knife he had listed for sale.
Once I have taken care of that, Dash and I are going to head in and have a nice little look around. We have a Bass Pro in Halifax (I even worked there for a time) but it's always nice to visit others when you are on the road!
Def

-
Took a lot of pictures the last couple days. My wife and I zipped around Northern PA and Southern NY, visiting cutlers and shops. One of the first stops was Wellsboro, PA, George "Nessmuk" Sear's home for most of his life. I found a couple independent cutlers (and a lot of outfitter shops) in the area. One of them was Balsam Ridge Cutlery, owned and operated by Dean and Carol Fry. (They have a website, its very out of date.)
[attach id=0 msg=2536848]
[attach id=2 msg=2536848]
Dean was nice enough to show me all around the shop, and taught me a bunch about his process. He worked in lumber for years (his office was actually right down the road from the hospital I was born in, and he grew up in the [non-adjacent] town I now work in. Small world) so he mostly showed me what kinds of woods he uses, how he processes them, etc. And his giant scary belt sander.
[attach id=1 msg=2536848]
Both of the right two on the middle row were temping. Several of the knives (especially the "Tioga Toothpicks" up top) were made to use up bits of stock from larger projects (he's been working on a pair of big Bowies lately).
[attach id=3 msg=2536848]
I got this little fixie. I've been interested in pocket fixed blades more lately. I think this might be a good fishing knife. As far as mass production knives go, it kind of reminds me of the CRKT Minimalists. Chunkier, but a similar 3 on the handle, pinky on the lanyard grip. Handle is made of resined paper. Maybe a fixed blade challenge this fall?




-
[attach id=0 msg=2537752] [attach id=1 msg=2537752]
It is slim picking at the local W-Mart. You can see how many empty slots there are. Not really a knife store, of course, but lots of folks buy outdoor stuff here. Best wishes. G

-
Pretty sparse in there. Saw a YouTube vid the other day showing off some knives bought at Wal-Mart on clearance. Might be the time of year they sell off a bunch of stuff prior to restocking. I was thinking of hitting a couple of Wal-Marts to see if I could find anything.
-
W-mart did a remodel of the store. I was built as a Super Walmart in 2013. After the work, they took out lots of things. They never did restock the knives completely, or the watches. 80% of the cheap W-mart bread is gone. No shelf space now, and as of today there is almost no butter. Shelves aren't empty, they just squeezed all the other stuff together and took out the butter. Strange. One lane open for checkout and the self-check stands. This is a busy store too. Parking lot stays full. Not while I was there, since I went early.
See if anybody recognizes the Cheap but Cheerful multis. The Victorinox Trekker is still there along with one 91mm. It's the one like a Huntsman sort-of with a magnifying glass. I forget the name. Best wishes. G
[attach id=0 msg=2537758]
-
Explorer. I had to look it up. Did anyone see in the first photo there are two silver handled knives? One is in the $19 slot and what looks like an identical one is in the $60 slot. Most people on here could recognize a big portion of these knives. I can't. G

-
Definitely slacked off a bit there. Here are some more from the same trip. After swinging through Wellsboro, we continued north to Olean NY, home of the KA-BAR/Cutco factory and visitor center.
[attach id=0 msg=2538969]
Not the whole line up, but a nice assortment of KABARs (they have pretty close to the whole line at the visitor center, just in different cases.)
[attach id=1 msg=2538969]
Here's the process of assembling a KABAR.
[attach id=2 msg=2538969]
I have one of these (I think mine is a Marbles, not a KABAR). I maintain they are the dumbest knife I've ever seen. It is technically 2/3 of a Nessmuk trio in one item though.
[attach id=3 msg=2538969]
Apparently there was an urban legend around the factory that a bunch of knives were stuck in a pit when they poured foundation for a new building or something. They went and found them. Pretty cool.




-
And a couple more KA-BAR/Cutco:
[attach id=0 msg=2538970]
[attach id=1 msg=2538970]
While we mostly think of their fixed blades today, Union/KA-BAR did have a solid folder range back in the day.
[attach id=2 msg=2538970]
And here's the main building. I forgot to take a picture of the visitor center, which is a smaller building in the parking lot.
Overall, it's a lot smaller than the Zippo/Case Museum, but it's an easy short stop to recommend if you're in the area. I think we spent about half an hour there, including a little souvenir shopping. The women working that day were very friendly and knowledgeable. Lots of good info on the early history of the East Coast cutlery industry.



-
@Alan K. said:
Pretty SPARTAN in there. Saw a YouTube vid the other day showing off some knives bought at Wal-Mart on clearance. Might be the time of year they sell off a bunch of stuff prior to restocking. I was thinking of hitting a couple of Wal-Marts to see if I could find anything.Fixed it
-
I had the opportunity to visit Smoky Mountain Knife Works last weekend…

-
I have more pics but am having trouble uploading them. Will have to try again later.
This was my second visit there, though the first was probably at least fifteen years ago.
In short, it’s very impressive, and I recommend stopping there if you have the chance.
I didn’t end up buying anything, but very much enjoyed browsing. I also made it a point to handle one of the Microtech OTF autos. While they seem like awesome fidget toys, I’m not convinced they are really any faster than a good manual flipper.
-
I didn't think to get any photos, when I was there, but when the Boss Lady and I were on vacation in the Western North Carolina area, I found Old School Knife Works, in the town of Otto, NC.
I was impressed with their offerings as they had the 2 things that I wanted. Another Sodbuster Jr. And a couple Opinel #6's in carbon. I also picked up some deer antler to make some beads with.
If you're in the area, it's worth the visit.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



