Keychain pliers tool Challenge (August) 2025
-
I like the looks of those scissors PN!
@powernoodle said:
Powernoodle Day 6
*
Removing the plastic from a Wyze smart plug with NexTool S11.* -
Day 6: The parcel opener is a cutter! One swipe cut these bags of water softener salt open.

-
Well, let's poke the hornets nest today, shall we.
Victorinox seems to add a KEY RING to many of their knives. Now granted the 58mm and the 74mm lines seem to be nearly perfect for attaching to your keys, but the 91mm line might be a stretch...
But, my Deluxe Tinker does have a KEY RING and it also has a really nice pair of PLIERS.I think I've said enough today.

-
DAY 6: I went on a hike this morning in a rather remote area, so I took the PS4 and the Signal. Neither was used.
[attach id=0 msg=2540462]

-
@PitCarver said:
Well, let's poke the hornets nest today, shall we.Victorinox seems to add a KEY RING to many of their knives. Now granted the 58mm and the 74mm lines seem to be nearly perfect for attaching to your keys, but the 91mm line might be a stretch...
But, my Deluxe Tinker does have a KEY RING and it also has a really nice pair of PLIERS.I think I've said enough today.

-
Day 6
Sliced up some card board and split open a package of Tea bottles for quick access to restock garage fridge, take one restock one!
Discovered I have been calling my tool the wrong name, darn no wonder it never responded when called☺️
The MICRO TOOLCLIP (SOG)
[attach id=0 msg=2540469]
Blade was used, also opened envelopes for bill paying duty.
Welcome Power Noodle. Nice pair of small MTs there! You stoked my surprise, I found an S11 on the River site two days ago, to arrive today maybe☺️

-

~
Things are more sedate down here. Finally stopped raining long enough that I had no excuse for not weed wacking some. I must have left my work pants out on the porch. Covered with plant particles. They are probably still out there, unless the raccoons dragged them away last night.
~Very sedate🫣
Weed wacking without work pants on!!!
Oh my!
A sight that can not be unthought!

-
And, a box just arrived…
[attach id=0 msg=2540471]
Many items packed in a small package


-
-
Day 5 (catch up)
Swapped out the usual Rambler on my keychain for the Squirt but tbh does feel a bit bulky in my work clothes so rambler is now back, squirt in my bag

-
Day 6
Trio of Micras - Tricras?
:D
-
It definitely does

@PitCarver said:
Well, let's poke the hornets nest today, shall we.Victorinox seems to add a KEY RING to many of their knives. Now granted the 58mm and the 74mm lines seem to be nearly perfect for attaching to your keys, but the 91mm line might be a stretch...
But, my Deluxe Tinker does have a KEY RING and it also has a really nice pair of PLIERS.I think I've said enough today.
-
I like that no matter what it's name!@LoopCutter said:
Day 6Sliced up some card board and split open a package of Tea bottles for quick access to restock garage fridge, take one restock one!
Discovered I have been calling my tool the wrong name, darn no wonder it never responded when called☺️
The MICRO TOOLCLIP (SOG)
[attach id=0 msg=2540469]
Blade was used, also opened envelopes for bill paying duty.
Welcome Power Noodle. Nice pair of small MTs there! You stoked my surprise, I found an S11 on the River site two days ago, to arrive today maybe☺️
-

@LoopCutter said:

Very sedate🫣
Weed wacking without work pants on!!!
Oh my!
A sight that can not be unthought!

-
Day 4: I've been helping doing work on a neighbor and buddy's retaining wall since Monday. We completely tore the old 70 year old failed retaining wall out Monday, Tuesday (yesterday), he and his uncle put down the forms and I arrived just in time to help haul materials (by hand) to mix the cement.
The Wurth utility knife (and my tape measure) was really the only thing to see much use. It has a bit driver, with the bits storing in a magazine in the sheath. Way better than a bulky fold-out driver. I normally don't like metal handles, but I love the heavy powder-coat on this one. Only complaint--plastic clip for the blades in the holder. I feel like that could, eventually break. I think though, it has a lifetime warranty if it does.
Crap photo--my rear was dragging when I came in well after 10 PM.
[attach id=0 msg=2540503]

-
Day 5:
More of the same. Had a little pair of 6" Klein linesman's, but I upgraded to my 7.5 New England pattern Proto 267s that got an upgrade earlier this year to Klein grips. .I think tomorrow, I'll upgrade one further to my 8-inch Knipex (whose pliers tips also touch). I really need to get some ironworker's pliers. Kleins have gotten pricey, but I'll see what I can get used first. It'll either be Channellock (my personal preference between the two) or Klein.
Pretty much, the tape measure was the only thing to see much use...
On another note, looks like I'm replacing a PSU next week... Bought a former floor model iBuyPower gaming desktop (14th gen i5, 16GB RAM, 3060) on sale at Sam's Club in April, and it's randomly started to shut off at random intervals. Apparently, iBuyPower is known for using low-end PSUs in its prebuilds (but otherwise top-shelf components). But, I don't think I could've built this PC for $500, let alone bought it at the normal near-$1000 price. So, I'll find an appropriate one and put it on order this weekend.
Personally, I think the hundreds of hours as the store's display on light duty demo mode, plus likely hundreds of additional hours in my use of running CAD and very hardware-intensive games that were the final nail in its coffin. I thought it had something to do with me moving the PC, but it started beforehand. I blamed it on an new game with poor optimization simply crashing my PC, but it looks like more than that.
May change out the RAM while I'm in there... Many people have told me CAD is one of the few things where 32GB is worth it.
[attach id=0 msg=2540504]

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
