Keychain pliers tool Challenge (August) 2025
-
Day 6
Trio of Micras - Tricras?
:D
-
It definitely does

@PitCarver said:
Well, let's poke the hornets nest today, shall we.Victorinox seems to add a KEY RING to many of their knives. Now granted the 58mm and the 74mm lines seem to be nearly perfect for attaching to your keys, but the 91mm line might be a stretch...
But, my Deluxe Tinker does have a KEY RING and it also has a really nice pair of PLIERS.I think I've said enough today.
-
I like that no matter what it's name!@LoopCutter said:
Day 6Sliced up some card board and split open a package of Tea bottles for quick access to restock garage fridge, take one restock one!
Discovered I have been calling my tool the wrong name, darn no wonder it never responded when called☺️
The MICRO TOOLCLIP (SOG)
[attach id=0 msg=2540469]
Blade was used, also opened envelopes for bill paying duty.
Welcome Power Noodle. Nice pair of small MTs there! You stoked my surprise, I found an S11 on the River site two days ago, to arrive today maybe☺️
-

@LoopCutter said:

Very sedate🫣
Weed wacking without work pants on!!!
Oh my!
A sight that can not be unthought!

-
Day 4: I've been helping doing work on a neighbor and buddy's retaining wall since Monday. We completely tore the old 70 year old failed retaining wall out Monday, Tuesday (yesterday), he and his uncle put down the forms and I arrived just in time to help haul materials (by hand) to mix the cement.
The Wurth utility knife (and my tape measure) was really the only thing to see much use. It has a bit driver, with the bits storing in a magazine in the sheath. Way better than a bulky fold-out driver. I normally don't like metal handles, but I love the heavy powder-coat on this one. Only complaint--plastic clip for the blades in the holder. I feel like that could, eventually break. I think though, it has a lifetime warranty if it does.
Crap photo--my rear was dragging when I came in well after 10 PM.
[attach id=0 msg=2540503]

-
Day 5:
More of the same. Had a little pair of 6" Klein linesman's, but I upgraded to my 7.5 New England pattern Proto 267s that got an upgrade earlier this year to Klein grips. .I think tomorrow, I'll upgrade one further to my 8-inch Knipex (whose pliers tips also touch). I really need to get some ironworker's pliers. Kleins have gotten pricey, but I'll see what I can get used first. It'll either be Channellock (my personal preference between the two) or Klein.
Pretty much, the tape measure was the only thing to see much use...
On another note, looks like I'm replacing a PSU next week... Bought a former floor model iBuyPower gaming desktop (14th gen i5, 16GB RAM, 3060) on sale at Sam's Club in April, and it's randomly started to shut off at random intervals. Apparently, iBuyPower is known for using low-end PSUs in its prebuilds (but otherwise top-shelf components). But, I don't think I could've built this PC for $500, let alone bought it at the normal near-$1000 price. So, I'll find an appropriate one and put it on order this weekend.
Personally, I think the hundreds of hours as the store's display on light duty demo mode, plus likely hundreds of additional hours in my use of running CAD and very hardware-intensive games that were the final nail in its coffin. I thought it had something to do with me moving the PC, but it started beforehand. I blamed it on an new game with poor optimization simply crashing my PC, but it looks like more than that.
May change out the RAM while I'm in there... Many people have told me CAD is one of the few things where 32GB is worth it.
[attach id=0 msg=2540504]

-
@LoopCutter said:
Day 6Sliced up some card board and split open a package of Tea bottles for quick access to restock garage fridge, take one restock one!
Discovered I have been calling my tool the wrong name, darn no wonder it never responded when called☺️
The MICRO TOOLCLIP (SOG)
[attach id=0 msg=2540469]
Blade was used, also opened envelopes for bill paying duty.
Welcome Power Noodle. Nice pair of small MTs there! You stoked my surprise, I found an S11 on the River site two days ago, to arrive today maybe☺️
Nice!
I think I'll carry my Seki-made one tomorrow. Kind of retired it after losing my original one. These have some of the most robust pliers in a small tool.
I had one of those when Walmart had them as a Christmas special around the time they first came out. The spring-open pliers were really cool.
-
Day 6
Squirt opened some Goya cookies as part of breakfast
-
<u>Day 6</u>
Opened up a case of water for deployment.

-
Day 7
I like the Dime package opener a lot

-
DAY 7: The SwissTech has better screwdrivers for household work than the PS4, but it's hard to get a grip.
[attach id=0 msg=2540521]

-
Day 7
Someone wants to send me pix of 'Amanda' in her Bikni that leaves nothing to the imagination. I don't know if the Bikni wearer is named Amanda, or if she plays Amanda on something? For a while it was personality X has photos of transparent bikini in public. Presumably leaving nothing, or at least very little. to the imagination. Like a mad dog spinning in circles trying to bite itself to death, that culminated in personality Z photos wearing transparent bikini in public. Good taste prevents me saying who he is.I did get a temporary break from these internet pimps. I got a couple of offers for HDPE manhole liners. The kind of manholes that are in the streets which allow municipal employees to access sewers and such. Just big heavy plastic donuts, as far as I can tell. I'm not sure exactly why they exist? Or why some demon possessed algorithm has decided that I would be interested in them.
Not much hand tool usage yestiddy. I did use a battery charger on my Cub. Then I mowed my lawn. I did use some mineral spirits and a screwdriver to pry a skink out of a glue trap. Skink, not skunk. Mineral spirits melt the glue in those sticky, mostly mouse oriented, plastic squares. Possibly mineral spirits are deadly to skinks, but we do live in a world of uncertainties.
Swiss+Tech and some pasta. I could lie and say I used the mini plier tool to open the macaroni bag. I would have if the tool had come with a blade. That gives me a good idea for a Swiss+Tech mod..... Hmmm? I made enough for two. Amanda could have had a little pasta if she had showed up for lunch. Wearing jeans, and a nice shirt. Maybe with some sandals. No need to bring a Bikni. Or plastic sewer adaptor. Best wishes. G
:( [attach id=0 msg=2540523]
-
I haven't posted a raccoon eating leftover canned corn photo in a while. Here is one fresh out of the trail cam. Best wishes. G
;)
[attach id=0 msg=2540524]
-
@LoopCutter said:
I found an S11 on the River site two days ago, to arrive today maybe☺️I think you will like it. I just discovered yesterday that it has no cap lifter, whereas the S11 Pro does, but for me that's not a biggy. But overall its my current favorite, though the Dime is still killer.
Powernoodle Day 7

Key ring with NexTool S11 ready for duty. -
@powernoodle said:
I think you will like it. I just discovered yesterday that it has no cap lifter, whereas the S11 Pro does, but for me that's not a biggy.On the unit that arrived, and reading the instructions. The cap lifter is located near the pivot point of the can opener tool. A combo style, with can opener on the end and lifter toward the handle.
-
@LoopCutter said:
The cap lifter is located near the pivot point of the can opener tool.Thank you, sir - it was hiding from me!

-
Day 7
And, the NEXTOOL lifter works very well!
[attach id=0 msg=2540536]
As does the Micro ClipTool
[attach id=1 msg=2540536]
(Different bottle). Two bottles of Root Beer now chilling in the fridge.
I will also note that on the NEXTOOL, the can opener hook is blunt and too thick to fit under the cap to serve as a lift. ! Details mater?
[attach id=2 msg=2540536]
The also, the Micro clipTool has no can opener!😜



Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login