Keychain pliers tool Challenge (August) 2025
-
Day 9: Using the parcel opener to open up the vent on some Dunkin! ☕☕.
Great job, everyone, on the first mini challenge! Books and reading are high up on my list of things I love to do.

-
Day 9
The file on the SHEFFIELD was adequate to debut the screen on a suet feeder.
[attach id=0 msg=2540721]
Maybe a squirrel or raccoon broke a tooth trying to access the cake in the cage.
Actually it was strange I found the nick today, any other tool’s file would be to wide to properly do the task


-
I had to recycle another pic today. I'm outside of the fence running one of the Temu weed whackers. I'm finding these things almost as handy as a good multitool.
My PowerPint is dressed and ready to go.
-
Day 9
Here is a batch of tools from this mornings chore. I started with using the Dime to help me pull off the old stapes holding candle TV co-ax from the siding on the house. It worked pretty well and got most of them. The ones I struggled to get off were painted on and the Dime couldn’t get a good bite. I switched to the small snap-on vacuum grip pliers I have had since 91. The cable cutters were for cutting off the cable terminations. I wasn’t even going to risk damaging the Dime. The screwdriver was for disconnecting grounds and removing splitters. My hands wet tired by that point so I didn’t use the Dime. I still need to remove some old telephone wires and then caulk the penetrations in the siding.
JonesE
-
I've come so close to pulling the purchase trigger on a Power Pint...they seem like just the top to have!
@PitCarver said:
I had to recycle another pic today. I'm outside of the fence running one of the Temu weed whackers. I'm finding these things almost as handy as a good multitool.
My PowerPint is dressed and ready to go. -
That's such a neat tool Gordon. It looks like the build quality is first rate too!
@LoopCutter said:
Day 9The file on the SHEFFIELD was adequate to debut the screen on a suet feeder.
[attach id=0 msg=2540721]
Maybe a squirrel or raccoon broke a tooth trying to access the cake in the cage.
Actually it was strange I found the nick today, any other tool’s file would be to wide to properly do the task

-
A busy day JonesE!
Here is a batch of tools from this mornings chore. I started with using the Dime to help me pull off the old stapes holding candle TV co-ax from the siding on the house. It worked pretty well and got most of them. The ones I struggled to get off were painted on and the Dime couldn’t get a good bite. I switched to the small snap-on vacuum grip pliers I have had since 91. The cable cutters were for cutting off the cable terminations. I wasn’t even going to risk damaging the Dime. The screwdriver was for disconnecting grounds and removing splitters. My hands wet tired by that point so I didn’t use the Dime. I still need to remove some old telephone wires and then caulk the penetrations in the siding.
JonesE
-
That Mac Tools cable cutter looks like it would work great on toenails too.
-
@powernoodle said:
That Mac Tools cable cutter looks like it would work great on toenails too.Man, you would have some fungly toenails if you needed those for cutting your nails.

JonesE
-
@LoopCutter said:
Day 9The file on the SHEFFIELD was adequate to debut the screen on a suet feeder.
[attach id=0 msg=2540721]
Maybe a squirrel or raccoon broke a tooth trying to access the cake in the cage.
Actually it was strange I found the nick today, any other tool’s file would be to wide to properly do the task

It is great when the tool in the pocket works perfectly
@gra_farmer said:
Catch upDAY 7
The small amtech multi tool I gave my mum, this sat in a bag unused, and found it while clearing the paper work after she died...I left it by her bed side, and when this challenge came up I knew it had to be included
Love that you are using the tool in remembrance of your Mom.
@Echotech said:
Day 9
Dug out my P4 today, no uses, a sturdy tool for it’s sizeThe Squirt is such a great tool for its size
@Fireman said:
DAY 9: I used to split my reading between fiction and nonfiction, but now I rarely read fiction. History, especially local, is a favorite topic. The thin book is poetry by a friend of a friend.[attach id=0 msg=2540693]
Very cool
-
Day 9.5
Mail call. I will say the package opener is one of my favorite tools on the Dime. It has also worked well for scoring for cut lines when I forget my pencil.
Picked up a new Lionsteel Barlow with Rams Horn scales. They did a great job on this modern traditional. I liked it so much I just ordered the clip point and spear point version. In Rams Horn of course.
JonesE
-
@Barry Rowland said:
That's such a neat tool Gordon. It looks like the build quality is first rate too!I found it at a pawn shop several years ago in SouthBend.
Paid $5The quality is first rate. The handle and built in backsprings match a MICRA.
The PIVOTS for the Plier head and spring me h looks identical to the MICRA’s scissors as well.
The only difference is on one handle on the MICRA it is cut down for the tweezers.
Makes me think that LM may have considered or did make the MICRA overseas in its early days.
The implements have no markings.
At least my MICRA does have USA marks and a date code stamped in the handles.
-
Day 8: Two Squirts are better than one, I suppose.
The EL was the original Leatherman I wanted as a kid, but couldn't afford $30-40 (or whatever they were on the tool pegs at my local Radio Shack for 15 years ago or so) they were back then. Years later, I got a used (but nice) one off eBay for $25 (new, insanely expensive!). It tends to provide strippers, cutters, screwdrivers and fine pliers/fuse pullers (as well as its tweezers) for fine jobs. Currently, it lives in the 3D printing toolkit tackle box.
I needed a stubby PH1, and I couldn't find my PB Swiss bit driver or my dedicated Master Mechanic USA PH1 Stubby. Thus, I brought out the Squirt's 3D PH1. Also, I pulled out a mis-placed set screw with the fuse puller.
Been having a pretty major issue with my 3D printer. It would jam up and shake/vibrate violently as the print bed reached the bottom limit of travel.
Removed the print bed (and the set screw for the back lead screw) and as I was setting it aside a chunk of old support fell out. I presume this piece fell off the print bed and lodged itself in there over time.
Also, I'm finally figuring out how to resize and attach photos in Linux. Turns out the pre-installed "Pix" app on Mint has many of the same options as MS Photos.
[attach id=0 msg=2540787]

-
Day 9
Squirt PS4 opened some dog dental chews
-
Day 9
Mini Sailor Lite breezed through port security, no questions asked. Fixed a zipper pull on my wife's bag that'd stretched open.

-
@BPRoberts said:
Day 9Mini Sailor Lite breezed through port security, no questions asked. Fixed a zipper pull on my wife's bag that'd stretched open.
Nice use. Great to at least be able to have a useful tool when other things aren’t allowed.
-
@JonesE said:
Picked up a new Lionsteel Barlow with Rams Horn scales. They did a great job on this modern traditional. I liked it so much I just ordered the clip point and spear point version. In Rams Horn of course.JonesE
Nice! Really liking that Barlow!
<u>Day 8 - Book challenge</u> - catch up
Another Sherlock Holmes fan here. Wife bought me these several years ago. I unfortunately don't make much time for reading anymore. I have 3 - 4 books waiting to be read.


-
<u>Day 9</u>
Bought some plugs to repair an extension cord.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




