Keychain pliers tool Challenge (August) 2025
-
Day 10
Just like home, tightening up the nightstand drawer.

-
@IMR4198 said:
I think I used the last of the garlic that I had hanging outside my back door to make some spaghetti. Might need to buy some extra garlic. One or two of those big braided ropes of garlic like you see with the leaves all plaited together. G
:(Might want to pick up two of those. One for the front and one for the back. Can't be too careful now-a-days.
<u>Day 10</u>
Working on a little project to replace the PRAM battery on my old (supposedly antique
) Powermac G3 Blue & White with a coin battery and a 3D printed holder. Used the mini-blade to cut out the coin battery.
-
Day 11

-
Day 11
I did a little modification to my weedwacker. See the black corrugated sleeve right behind the loop handle? I'm not sure why the Stihl people put that thing on there like they did. It is roughly on the balance point. Good for carrying the tool, right? Wrong. The weight of the motor is above the centerline and the sleeve is loose on the shaft. When you pick it up, the motor flips upside down. Suddenly, at that. I slid the loop handle and sleeve forward. Then I wrapped duct tape around the shaft and forced the sleeve back into place. Now it fits tight and you can't see where the tape is either. The tool is running and working, but this fall I think I will take it back to the shop. It is doing a couple of things that it shouldn't. No point in taking it in now and letting them put it in a rack somewhere for a couple of months. While the weeds are still growing.Best wishes, G
[attach id=0 msg=2540907]
-
Day 11: Tightening the knob on a cabinet with the straight edge. It's the little, day to day jobs where any keychain tool shines, be it a Dime, Classic, etc.
Gary, I've yet to find a trimmer that I could find a happy spot for that handle. Great work!
Looking good everyone!

-
DAY 10. I fell asleep early last night and forgot to post this. SwissTech and another tool for adjusting things.

Just joking, folks. The "metallic knuckles" are legal here, but I use them as a paperweight.[attach id=0 msg=2540920]

-
DAY 11 started in a bit of a :ahhh because I could not find my PS4 :ahhh :ahhh :ahhh
After a careful search, I found them, but it illustrates why these would be better carried on a keychain.
[attach id=0 msg=2540922]

-
Day 11
The NEXTOOL has pocket duty today.
I did change the lanyard loop color to yellow and while upstairs, a dresser knob feel into my hand. The Phillips did fit the screw head and start the thread, but straight tip tightened so a repeat should not occur for another 30 years.[attach id=0 msg=2540931]

-
I did a little modification to my weedwacker. See the black corrugated sleeve right behind the loop handle? I'm not sure why the Stihl people put that thing on there like they did. It is roughly on the balance point. Good for carrying the tool, right? Wrong.~
I do not believe the black corrugated piece is a handle cover. I do believe it is shipping material to protect the end of the shaft during shipping!
It should have been removed before the shaft was mated with the motor housing.
For me, I must position my shaft handle close the motor housing, otherwise I am bent over like a bean picker working the fields.
Stihl makes a good weed wacker, I just wish I got a straight shaft. I now hate watching my grandson bending over when wacking the edges 😉
-
Powernoodle Day 11
*
Factor meal. We receive 4x per week, to fill in the gaps. They are somewhat spendy, but pretty yummy. My mother receives 5x per week from Home Chef, as it is something easy for her to microwave.* -
I lost a flashlight this morning. Finally turned up. The little black corrugated piece is listed on the parts list for the weed wacker. It is called a sleeve. Took a real wizard to think up that name. You can see it on the assembled photos for the tool.
If I had it to do over again, I would have chosen another Echo. Best wishes. G
[attach id=0 msg=2540937]
-
@LoopCutter said:
Why???
So you have to hunt for your keys too?Well, now that you mention it...

-
@LoopCutter said:
I do not believe the black corrugated piece is a handle cover. I do believe it is shipping material to protect the end of the shaft during shipping!It should have been removed before the shaft was mated with the motor housing.
Looks like its supposed to stay there.

Stihl FS 91 R Weed Eater Review
Looking for a Pro-level string trimmer without spending money on a high-end Stihl? Check out if the Stihl FS 91 R weed eater fits your needs!
Pro Tool Reviews (www.protoolreviews.com)
See p.23, part #9. I may serve the purpose of keeping the "loop handle" at least X distance away from the trigger. Though I could be making that up.

-
That corrugated piece must be a newer thing.
Of course I have not been shopping for Stihl string trimmers since I acquired mine 6 or 7 years ago. Maybe longer.
Shucks, I have been proven wrong!

Always a first time i guess

-
I did a little modification to my weedwacker. See the black corrugated sleeve right behind the loop handle? I'm not sure why the Stihl people put that thing on there like they did. It is roughly on the balance point. Good for carrying the tool, right? Wrong. The weight of the motor is above the centerline and the sleeve is loose on the shaft. When you pick it up, the motor flips upside down. Suddenly, at that. I slid the loop handle and sleeve forward. Then I wrapped duct tape around the shaft and forced the sleeve back into place. Now it fits tight and you can't see where the tape is either. The tool is running and working, but this fall I think I will take it back to the shop. It is doing a couple of things that it shouldn't. No point in taking it in now and letting them put it in a rack somewhere for a couple of months. While the weeds are still growing.Best wishes, G
[attach id=0 msg=2540907]It's been several years since I had a proper weed whacker, Gary. The Boss Lady bought a cheap battery powered one from the Temu place. Actually does better than I thought that it would. She's got me using it to trim brush back from the gate.

-
More rain here today, but the Boss Lady and I are just sitting out on the front porch this afternoon.
Mini Suspension in my pocket.
-

@LoopCutter said:
Why???
So you have to hunt for your keys too? -
Another great day everyone!!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
