Keychain pliers tool Challenge (August) 2025
-
That's like the area my grandparent's farm was in. The whole area is developed. It's almost hard to believe.
-
:ahhh :ahhh :ahhh
@PitCarver said:
My order of cigars came and the package opener on my Dime was put to use. -
<u>Day 26</u>
Cutting open a new bottle of BBQ sauce.

-
Day 27
[attach id=0 msg=2542177]
.jpg)
-
Day 27
Just back from a work leaving do, may have drunk a little more than usual
big time munchies!
-
DAY 26. I fell asleep and forgot to post this last night

PS4 and Companion
[attach id=0 msg=2542192]

-
DAY 27. My wife has been bugging me to look at these blooming flowers. PS4 and me checking them out.
[attach id=0 msg=2542193]

-
Powernoodle Day 27
*
I'm guessing that I open 10 Amazon packages every week. I can't recall the last time I've been to a store, other than an occasional grocery run.* -
The mini Suspension probably won't be much use in the yard today, but had to share the day with my Temu weed whacker.

-
Whoa... that's a wicked looking weed whacker. Looks more like a small tree whacker.

-
That's one way to overcome the problem of the string constantly breaking.

-
Day 27
I almost forgot!!!
A BOND THAT ARRIVED Monday, apparently a TSA confiscated item was brand new in condition and stiffness. A nail breaker to deploy the blade.
Completed oiling the pivots and working the lubricant between tools at the pivot, some improvement, but not for the blade. Then notice the blade handles back spring air gap was noticeably thinner on the blade handles, and very tight against the blade. (New style)
So, inspected my assortment of keychain pliers and found the Sheffield’s flat blade was just a bit thicker than my other items and when I slipped it between the pivot and frame it increase that air gap.
Let it set overnight, (did not want to pry, as it could break that back spring)
Well this morning, the BOND is 70% better at deploying

[attach id=0 msg=2542218]
[attach id=1 msg=2542218]
[attach id=2 msg=2542218]The spring rides against the knife pivot and drops into the detent perfectly. The Phillips and Can opener operate as expected.



-
Yeah, it looks like the tang on the blade is bigger causing more tension on that area. Probably intentional to keep the blade from becoming a pocket trap like some people say Gen 1 is. I was a little anxious about doing any prying/shimming on the spring. I taped up the blade on mine and worked with it while watching sports. It is getting more manageable.
I seem to recall someone was having trouble with the 'springs' on the painted Bonds cracking. Was that you, Gordon? Best wishes. G

-
-
Congrats on the new to you Bond, Gordon. Looks like an excellent example.
JonesE
-
@IMR4198 said:
~
I seem to recall someone was having trouble with the 'springs' on the painted Bonds cracking. Was that you, Gordon? Best wishes. G

Yes. That was my experience.
Two separate occasions, Sienna color. The blade handle broke on both units at almost the same point.
No prying, just opening and closing exercise. Went from very hard moving just the blade, to very very easy. Then found the back piece was gone.
I have done same procedure on two stainless finished units with no issues. Still gun shy to try the colored models.
And, now that sheaths are not included, likely will not!
I tried the tension method last night to safe myself from breaking a nail or cutting myself. The taping of blade is smart, I was just tired last night to get tape and to manually work the pivot. Oil was my friend, but not 100%
-
Congratulations Gordon!!@LoopCutter said:
Day 27I almost forgot!!!
A BOND THAT ARRIVED Monday, apparently a TSA confiscated item was brand new in condition and stiffness. A nail breaker to deploy the blade.
Completed oiling the pivots and working the lubricant between tools at the pivot, some improvement, but not for the blade. Then notice the blade handles back spring air gap was noticeably thinner on the blade handles, and very tight against the blade. (New style)
So, inspected my assortment of keychain pliers and found the Sheffield’s flat blade was just a bit thicker than my other items and when I slipped it between the pivot and frame it increase that air gap.
Let it set overnight, (did not want to pry, as it could break that back spring)
Well this morning, the BOND is 70% better at deploying

[attach id=0 msg=2542218]
[attach id=1 msg=2542218]
[attach id=2 msg=2542218]The spring rides against the knife pivot and drops into the detent perfectly. The Phillips and Can opener operate as expected.
-
Looking great everyone!! Most definitely on the home stretch!
Day 27: Playing around with what is becoming a tradition for me and PBMT challenges :D. Had to borrow Mrs. R's cell phone to to this.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
