Keychain pliers tool Challenge (August) 2025
-
Congrats on the new to you Bond, Gordon. Looks like an excellent example.
JonesE
-
@IMR4198 said:
~
I seem to recall someone was having trouble with the 'springs' on the painted Bonds cracking. Was that you, Gordon? Best wishes. G

Yes. That was my experience.
Two separate occasions, Sienna color. The blade handle broke on both units at almost the same point.
No prying, just opening and closing exercise. Went from very hard moving just the blade, to very very easy. Then found the back piece was gone.
I have done same procedure on two stainless finished units with no issues. Still gun shy to try the colored models.
And, now that sheaths are not included, likely will not!
I tried the tension method last night to safe myself from breaking a nail or cutting myself. The taping of blade is smart, I was just tired last night to get tape and to manually work the pivot. Oil was my friend, but not 100%
-
Congratulations Gordon!!@LoopCutter said:
Day 27I almost forgot!!!
A BOND THAT ARRIVED Monday, apparently a TSA confiscated item was brand new in condition and stiffness. A nail breaker to deploy the blade.
Completed oiling the pivots and working the lubricant between tools at the pivot, some improvement, but not for the blade. Then notice the blade handles back spring air gap was noticeably thinner on the blade handles, and very tight against the blade. (New style)
So, inspected my assortment of keychain pliers and found the Sheffield’s flat blade was just a bit thicker than my other items and when I slipped it between the pivot and frame it increase that air gap.
Let it set overnight, (did not want to pry, as it could break that back spring)
Well this morning, the BOND is 70% better at deploying

[attach id=0 msg=2542218]
[attach id=1 msg=2542218]
[attach id=2 msg=2542218]The spring rides against the knife pivot and drops into the detent perfectly. The Phillips and Can opener operate as expected.
-
Looking great everyone!! Most definitely on the home stretch!
Day 27: Playing around with what is becoming a tradition for me and PBMT challenges :D. Had to borrow Mrs. R's cell phone to to this.

-
@AzteCypher said:
I remember carrying a knife or SAK since middle school. I even remember pickup trucks having gun racks in high school. Guys would head out after school to find some doves, rabbits, etc.Same here. I received my first pocket knife at 8yo and always carried in my pocket from that point on. I was going to give a 12yo neighbor boy a SAK when he took interest in one of mine, when I asked the mom she was appalled I would even consider giving a knife to a child.
And trucks with gun racks to go hunting after school was also common.
It was a different time. Some things change for the better, while others not so much.
Enjoying a warm summer day.Thanks everyone for the warm “Anniversity” wishes yesterday.
JonesE
Nice pic
@LoopCutter said:
Day 27I almost forgot!!!
A BOND THAT ARRIVED Monday, apparently a TSA confiscated item was brand new in condition and stiffness. A nail breaker to deploy the blade.
Completed oiling the pivots and working the lubricant between tools at the pivot, some improvement, but not for the blade. Then notice the blade handles back spring air gap was noticeably thinner on the blade handles, and very tight against the blade. (New style)
So, inspected my assortment of keychain pliers and found the Sheffield’s flat blade was just a bit thicker than my other items and when I slipped it between the pivot and frame it increase that air gap.
Let it set overnight, (did not want to pry, as it could break that back spring)
Well this morning, the BOND is 70% better at deploying

[attach id=0 msg=2542218]
[attach id=1 msg=2542218]
[attach id=2 msg=2542218]The spring rides against the knife pivot and drops into the detent perfectly. The Phillips and Can opener operate as expected.
Nice pick up
@powernoodle said:
Powernoodle Day 27
*
I'm guessing that I open 10 Amazon packages every week. I can't recall the last time I've been to a store, other than an occasional grocery run.*How well do those insect traps work?
-
Day 26
Internet wet out yesterday before I had a chance to post and didn’t come back on until late morning, so her is yesterday’sMini flagship helped with outdorr coffee. In addition to using the pliers as a pot lifter, I also use it to lift the hot wind screen and hot so I can put the alcohol stove out. Then the pliers also work to lift stove when pouring excess fuel back in bottle.


-
Probably the biggest reason why I like having pliers for my hiking and camping multitool. It's sure nice to have with something like that Sherry.
@Sos24 said:
Day 26
Internet wet out yesterday before I had a chance to post and didn’t come back on until late morning, so her is yesterday’sMini flagship helped with outdorr coffee. In addition to using the pliers as a pot lifter, I also use it to lift the hot wind screen and hot so I can put the alcohol stove out. Then the pliers also work to lift stove when pouring excess fuel back in bottle.
-
26 (makeup) and 27
The button on this microphone broke, so I used the phillips to poke it.
[attach id=0 msg=2542247]
The file on the sailor has a QR code. When you scan it, it just gives you a mess of numbers and letters (serial number?) not a web address.
[attach id=1 msg=2542247]


-
Great work!

-
<u>Day 27</u>
No use today so here's a glamour shot with my son's Gerber Clutch.

-
Day 27
The mini flagship was used for a few basic tasks today but decided to go with a glamour shot at the park
-
Day 28
The blade on the PS4 does a great job letter opening

-
-
-
-
-
-
Day 28
[attach id=0 msg=2542265]
.jpg)
-
DAY 28: loading ammo this morning.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login





