SAK-A-Like / Off Brand Challenge - September
-
@AzteCypher said:
Love it!! Outstanding story telling Gary!!

-
Oh wow, what a challenge! I only have one off brand sak and thats because the kid bought it for me from I believe Yosemite park, 
JR -
@matzesu said:
How convenient: I did though this morning again on the SAK i would like to put in my EDC along whit the Spirit X as some Tools there are not that good usuable, so it shall be my Blue Swizza S09 then .. , i mean ok its Skizzors are not that good as i did expect (to say it kindly), maybe they will serve there purpose, and i have for Paper and Candle Wick the Skizzors of my Swisstool, so i think i will join, even through im a day too late..It's never too late to join in on the fun! You can do two posts today and catch up right away!
-
I have been using my Trim Trio to open boxes from Amazon and open packaging of bottled water
-
Day2
I'll tell you what I like, right out of the gate. I really like how light this Gerber Armbar is, and now it disappears in the pocket. I dont feel the need for a suspension clip, and I can dig it out of my pocket without any trouble.

-
Nice photo. Nothing wrong with light and portable. Best wishes. G

-
Day 2
I should have sharpened this instead of just grabbing it from the display case w/o checking the edge...

Cutting cardboard, used both main and hook blade, 4 flaps and 1 side with each...
Yea, I was sawing.Well tomorrow's pic will probably be me with a stone.
Or if I get bored at work tonight I may use a Vic Pen sharpener..jpg)
-
Day 2
JOTS opened this Buck 630 Paklite Hide, which will probably see some carry in the fixie challenge next month.

-
A fixie challenge? I might have to jump in that fray!
Day 2
As per usual, an insolent Meijer receipt sacrificed itself in the interest of edge testing. The Swiza comes with a pretty good factory edge. A Mini wanted to be included in the photo, too. :D
[attach id=0 msg=2542757]

-
Farmer X is going to tease me with those Swiza pics.

<u>Day 2</u>
Folks, what we have here is a Joseph Rodgers & Sons "The Regimentals" R30. Nothing to write home about but the tools on the R30 are solid. More-so than I expected. The can opener honestly surprised me. The blade takes an edge without too much effort.

The R30 contains a blade, a flat head, a bottle opener, and a can opener. No backside or scale tools. I also have the R70 which adds a corkscrew, a Phillips, a toothpick, tweezers, and something I would loosely call a keyring. The corkscrew does not "appear" to be a weak as I expected but I haven't tried it as I'm not a wine person.

-
I think I agree with friend Aztec. The Swiza does look interesting. I would like to see one for real. Might like it. Might not. I try not to think about them too much. Might get the urge to track one down and that wouldn't be prudent. Seems like friend Farmer X said something about having a Camillus 27? Would that be something that you might be interested in carrying for the challenge? I have one of those marked Craftsman that I like a lot.
I could easily get by with carrying nothing else but some version of a TL-29 every day. I must have had one years ago. I don't remember. I think I will post a photo of mine in a couple of days.
Best wishes. G

-
Day 2
The Gerber Armbar Slim Drive (henceforth GASD) on cigar duty.
Thus far:
I give the concept an “A”. The idea of a fairly slim, light, and compact tool that contains a blade and some decent screwdrivers (in this case, a bit driver with a single bit that is flat on one end and Phillips on the other), plus the obligatory bottle opener of course, is a good one.
I give the execution a “C”. F&F isn’t terrible, but not on par with Vic standards.
The blade is supposed to be OHO (my example is quite stiff, but may loosen up with use) and features a liner lock. I also don’t like coated blades and don’t feel the wharncliffe blade shape is the best option for general EDC, but these last two are really personal preference.
The bit driver strongly retains the bit thanks to what appears to be a rare earth magnet; good job by Gerber on this, as nothing ruins the experience of a tool with removable bits faster than bits that fall out/get lost. The bit driver is also pretty well centered in the tool, which makes it much more pleasant to use than MTs with offset drivers. A second bit with some different tips might have been nice, but I’m betting the included double-ended bit will handle the majority of screws most folks will encounter.
One oversight, IMO, is that the bit driver does not lock open. I would much rather have a blade that doesn’t lock and a screwdriver that does (e.g. TL-29) than a blade that locks and a screwdriver that doesn’t (as the GASD has).
I haven’t tried the bottle opener, but as this is possibly the easiest tool to build of any commonly found on MTs, I’m willing to assume it opens bottles. I don’t like the tool opening mechanism though; apparently, the only way to open it is by applying pressure to the ridges on the back of the tool. There is no nail nick or other more positive means of opening that I can see. Like the blade, the bottle opener on my example is quite stiff, but may loosen with use.
Overall, I think most users (including yours truly) would be better served by spending the extra $10 for a Vic Explorer.

-
Day 2:
The fairly blunt awl on the US General is better as a nail cleaner. And a pretty good one at that.
[attach id=0 msg=2542765]

-
Day 2
Ruike opened a popsicle
-
Day 3
The older the knife the stronger the springs, not as hard as my old SAK mod 1908 soldiers but a lot stronger than a modern SAK.
Got a real soft spot for these old Camillus US Army knives, there’s nothing wasted on them, just a good solid tool. This one’s from 1971

-
I did not had sadly something to do this Half Day for the Swizza, sadly, there are also not that many usefull Tools on it for my Workday, : The Skizzors are sadly not usefull, they look awesome: Fullsize Skizzors on an SAK Like, but sadly the 2 Sheer Halfs are not bound together strong enough that it can actually cut something.. , but other than that its a nice SAK Alternative: You can even get the Blade and the Bottle Opener out whit Gloves , if they would bring out an Modell whit a Normal Skizzors, i might get me this also ..
-
<u>DAY 3</u> Getting ready to lead a hike with an Adler.
[attach id=0 msg=2542774]

-
Day 3
The old-style can opener on the Rough Rider is used by plunging the tip through the can lid until the knurled peg touches the rim. That leaves most of the blade out of the can. Then you jig it up and down with the peg riding on the rim. Simple, right? Hmmm? This thing is sharp. It can close on your hand unlike a lobster claw or Victorinox type. You can get hurt with the newer type openers too, but you have to work at it. With the hand holding an applesauce can shielded by an oven mitt, I decided to try the thing. It has a large cross section, so it is hard to put through the lid. Problem one. With the sharp end turned away from you, you start in with the cutting. It cuts from inside the can, right? For me, it rode up right along the rim and scraped the inside of the can. You could get metal shavings. Problem two. It also requires a lot of effort making you push harder and increase the likelihood of an accident. Problem three strikes and out. I cut a little way with the tool, then decided it wasn't worth the effort. Plus I don't like shavings in the apple puree. I pulled out the opener and wiped it off. Then I found another problem. The opener was damaged. Evidently the can is harder than the blade. The blade was significantly dulled and had little nicks in it from just one usage. Bonus problem number four. I only cut an inch or so before giving up. I will say the tool is likely a good package opener. The nub on the blade prevents it from being much use elsewhere. I see comments on the net about Rough Rider (and the later Rough Ryder stamped knives) being rough finished, dull, gaps in the back springs, ill fitted emblems, etc. Others say they are well put together. I have to fall into the latter class. I have never seen a bad one. All the ones I owned (and handled) have been finished and fitted well with attractive handles and sharp blades out of the box. Same thing with the new imported Marbles, which look like they came from the same factory maybe? The springs on mine are very stiff. The awl is deadly sharp. The bone handles look great. The lanyard loop is annoying. I may remove that. It is a lot heavier than something like an old KampKing or one of the Imperial Irish red handled Sak-a-likes. I had one of those. There are some models with different can openers and I think one with carbon steel.Best wishes. G
:) [attach id=0 msg=2542777]
-
Day 1 (Even though its the 9-03)
Im currently surprised how good these Sheers on the Swizza S09 did work on Plastic Packing Band from a Pack of Cardboard Kartons whe use to pack Honey Jars,
so its only arch enemy is rope for now ..
Im again quite pleased whit this Knife, i was at first a bit dissapointed but in Combination whit the Swisstool Spirit, and the Minichamp its a quite nice SAK Alternative..Pictures will get add later, as i cant do this on my Work PC
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login