SAK-A-Like / Off Brand Challenge - September
-
Day 6
MTo 507 storage problems today. Hard to get on the site. Best wishes. G
[attach id=0 msg=2543011]
-
Day 6
Pocket carry on day 6 will continue to be the crossout Camillus. I tested the edge and found it would not even cut paper 😱. That has been remedied 😉
And, found these SAK-a-like samples lying on my ‘puter desk. (Had to use my BOND to extract most tools other than the blades.
The larger is a single layer, smaller a 3 layer.
[attach id=0 msg=2543018]
I would guess I left a dozen or more of these samples when I departed that office location, these two were likely art of mail I brought home to home office during traveling days.

-
Day 5
LM Free T2

-
Day 6: immediately below the screwdriver in the picture, appears to be the lanyard ring hole. Has anyone else noticed this?

-
[attach id=0 msg=2543032]

-
That one looks a lot easier to use Gary. This one doesn't seem to move. It reminds me of the lanyard hole on the No. 9 DIY

-
Swiza didn't show a lanyard loop in its older catalogs. The newest inventory photos show a loop on many of the models. I don't know if they are fixed or fold out. I am not a huge fan of key ring/ lanyard loops, but think a fold out/slide out type is a good idea.
Can you thread a loop of some sort through the 'notch' below the screwdriver? Does it go all the way through?
[attach id=0 msg=2543042]
Best wishes. G


-
Speaking of Opi DIY. I tried the simulated leather loop from my new Colorama in the wee lanyard hole of the DIY. Works fine. Probably would be satisfactory for about a week before breaking. It has rained every day this week, and the Colorama locked up pretty solidly. I dragged the blade open and forced some beeswax lip balm into the slot. Works some better now. I have used the same goop on another No. 8 beech for a year. The plastic DIY opens like a dream with no lube regardless of the weather.
Any other company besides stodgy tradition-bound Opinel would have offered a line of synthetic handle knives. Wouldn't need to discontinue the woodies, just offer a few all-weather alternatives. Put a hole in the handle while you are at it big enough for a piece of paracord. Best wishes. G -
Day 6
Broke down boxes for recycling

-
On Day 4 I did receive an better SAK Clone than the Cheapos from Aldi and Tchibo I had :
Böker Plus Techtool City 4: quite nice looking Micarta Scales, an non locking but quite Charp Blade, a small Serated Blade which might be usefull for Package Straps, an Skizzor which allready works better than the big from the Swizza, an Plier I did Not Test yet , but I doubt it’s better than the Plier of an Victorinox, but might some times get usefull to grip stuff, an Saw which feels the same as an Victorinox Saw, and an Bottle Opener which should just work..
On the Backside an Korkscrew and an Riemer,
No Twizzers, but an Glassbreaker, and an Pocket Clip
Looks nice, feels like quality, and it’s just as thick as my Vic Delemont S 52
Will post my next uses, but today I did not use any Pocket Knife

-
Day 6 of 30
Today used scissors to open bags of sweets, also used phillips to tighten cabinet hinges
[attach id=0 msg=2543048]

-
I am so sorry guys!
I completely forgot about this. With my shoulder surgery and stuff I totally forgot this was going on for September. Doing this challenge would have been hard and very interesting with one arm. My dominant hand has gotten weak and using it now results in pain. :-\ I'll keep working on my exercises in hope for the next challenge. -
Getting better is job one. Still might be fun to follow along and look at some pix. Best wishes as always. Gary

-
Day 6
Using the awl to break up some ice.
Note this isn't a hardened block of ice that needed broken, its just clumping and in need of lite persuasion..jpg)
-
Those plastic handles are SMOOTH!!
@IMR4198 said:
Speaking of Opi DIY. I tried the simulated leather loop from my new Colorama in the wee lanyard hole of the DIY. Works fine. Probably would be satisfactory for about a week before breaking. It has rained every day this week, and the Colorama locked up pretty solidly. I dragged the blade open and forced some beeswax lip balm into the slot. Works some better now. I have used the same goop on another No. 8 beech for a year. The plastic DIY opens like a dream with no lube regardless of the weather.
Any other company besides stodgy tradition-bound Opinel would have offered a line of synthetic handle knives. Wouldn't need to discontinue the woodies, just offer a few all-weather alternatives. Put a hole in the handle while you are at it big enough for a piece of paracord. Best wishes. G -
@David Bowen said:
I am so sorry guys!
I completely forgot about this. With my shoulder surgery and stuff I totally forgot this was going on for September. Doing this challenge would have been hard and very interesting with one arm. My dominant hand has gotten weak and using it now results in pain. :-\ I'll keep working on my exercises in hope for the next challenge.Just take time and heal then get back your strength.
@matzesu said:
On Day 4 I did receive an better SAK Clone than the Cheapos from Aldi and Tchibo I had :
Böker Plus Techtool City 4: quite nice looking Micarta Scales, an non locking but quite Charp Blade, a small Serated Blade which might be usefull for Package Straps, an Skizzor which allready works better than the big from the Swizza, an Plier I did Not Test yet , but I doubt it’s better than the Plier of an Victorinox, but might some times get usefull to grip stuff, an Saw which feels the same as an Victorinox Saw, and an Bottle Opener which should just work..
On the Backside an Korkscrew and an Riemer,
No Twizzers, but an Glassbreaker, and an Pocket Clip
Looks nice, feels like quality, and it’s just as thick as my Vic Delemont S 52
Will post my next uses, but today I did not use any Pocket KnifeHopefully you enjoy the Boker.
-
Day 6
Used the Boker saw blade to cut down a 1-1.5in stick into pieces that would fit in my smaller twig stove. No scientific tests done, but I would say it worked as well as the SAK saw.
-
Day 5: Crater C33T. In terms of my "not SAK" multifunction knives, it's my favorite. Fairly light, and basically just blade and drivers.
My old corded Black and Decker Cut Saw was showing its age and was in poor condition (as it had been a beater for years before I inherited it), and I needed a heavy duty replacement.
I had a few cordless reciprocating saws, but most were low-mid end and never impressed me. I decided to try a real Sawzall--a late '90s Milwaukee 6537-22 10A model. They go used for around the cost of a cheap Harbor Freight POS--so around $50. Also, this one came with a massive stack of blades in varying conditions (mostly slightly used or new, however)--almost all Lenox or Milwaukee--which aren't cheap.
Much less vibration than any of my others (20V Craftsman brushed, 18V DeWalt running on a 20V battery with the official adapter, and the B&D), much more power, and easily changed blades. Also the most comfortable to use.
I am still thinking about going with M18, even though I bought 20V DeWalt batteries to use with the old tools, and am slowly expanding with new 20V tools.
[attach id=0 msg=2543079]

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

