SAK-A-Like / Off Brand Challenge - September
-
Day 6
Used the Boker saw blade to cut down a 1-1.5in stick into pieces that would fit in my smaller twig stove. No scientific tests done, but I would say it worked as well as the SAK saw.
-
Day 5: Crater C33T. In terms of my "not SAK" multifunction knives, it's my favorite. Fairly light, and basically just blade and drivers.
My old corded Black and Decker Cut Saw was showing its age and was in poor condition (as it had been a beater for years before I inherited it), and I needed a heavy duty replacement.
I had a few cordless reciprocating saws, but most were low-mid end and never impressed me. I decided to try a real Sawzall--a late '90s Milwaukee 6537-22 10A model. They go used for around the cost of a cheap Harbor Freight POS--so around $50. Also, this one came with a massive stack of blades in varying conditions (mostly slightly used or new, however)--almost all Lenox or Milwaukee--which aren't cheap.
Much less vibration than any of my others (20V Craftsman brushed, 18V DeWalt running on a 20V battery with the official adapter, and the B&D), much more power, and easily changed blades. Also the most comfortable to use.
I am still thinking about going with M18, even though I bought 20V DeWalt batteries to use with the old tools, and am slowly expanding with new 20V tools.
[attach id=0 msg=2543079]

-
Day 6: Two mail-calls.
The Lledo RNLB Garside (Tyne-class Lifeboat) is tough to find in the States, though a few were brought back as tourist trinkets. I paid $2 shipped for this one off eBay from an eBay seller in CO.
I think Garside was the debut. It was produced for Kimberly-Clark (who if I recall, paid for the boat to be built) on behalf of the Royal National Lifeboat Institution. The box still has a RNLI price tag of GBP 2.50. Over 2-3 years, Lledo did most of the Tyne-class--most of the time, with an ad for the sponsor of the boat on the plinth.
[attach id=0 msg=2543080]
And another package showed up unexpectedly. Long story short, we've had a ton of problems with UPS lately. A neighbor of mine called on his way out from my place, saying he found a package with my name on it--a quarter-mile from my place on an old farm near no address whatsoever. We suspect the owners (my estranged Dad and his second wife I might add) of that property (who without our permission, blocked the driveway on our property with a gate) complained because the UPS guy recently started going through that gate to leave packages on my porch. I've tried to get someone at UPS to get to the bottom of this issue, but so far, nothing's worked.
That package contained some tools I ordered from Caterpillar--drop-shipped through our local dealer. No shipping notification or phone call and I actually checked my CAT account this morning--and it was still saying "processing"--makes me wonder if UPS picked it up on the way out--they're on the same road as the CAT dealer.
Most are rebranded Snap-On, though it appeaers the 213-1983 (6-inch) are actually rebranded Channellock (with exclusive black grips).
[attach id=1 msg=2543080]


-
Day 7
Like to keep one of these mini lighters on my keychain, figure when you’ve got a MT, in my case a Rambler, a small flashlight and fire, you’ve got quite a few bases covered

-
@David Bowen said:
I am so sorry guys!
I completely forgot about this. With my shoulder surgery and stuff I totally forgot this was going on for September. Doing this challenge would have been hard and very interesting with one arm. My dominant hand has gotten weak and using it now results in pain. :-\ I'll keep working on my exercises in hope for the next challenge.No worries, your health is more important. Gotta make sure you're in good fighting form first.
@Sos24 said:
Used the Boker saw blade to cut down a 1-1.5in stick into pieces that would fit in my smaller twig stove. No scientific tests done, but I would say it worked as well as the SAK saw.@matzesu said:
On Day 4 I did receive an better SAK Clone than the Cheapos from Aldi and Tchibo I had :
Böker Plus Techtool City 4: quite nice looking Micarta Scales, an non locking but quite Charp Blade, a small Serated Blade which might be usefull for Package Straps, an Skizzor which allready works better than the big from the Swizza, an Plier I did Not Test yet , but I doubt it’s better than the Plier of an Victorinox, but might some times get usefull to grip stuff, an Saw which feels the same as an Victorinox Saw, and an Bottle Opener which should just work..
On the Backside an Korkscrew and an Riemer,
No Twizzers, but an Glassbreaker, and an Pocket Clip
Looks nice, feels like quality, and it’s just as thick as my Vic Delemont S 52
Will post my next uses, but today I did not use any Pocket KnifeSome nice looking Bökers there.
-
<u>Day 6</u>
The Imperial Camper Knife didn't do a bad job cutting the cigar in spite of me.

-
The other 2 Knifes in my Pictures are no Bökers, there are Victorinox ..
will post later today my small Böker and SAK Alike Collection..
I will this week have time to test out how good the Böker SAK really is.. But I find it’s allready quite cool
And thumps up for David Bowen, get well soon, i hope One Hand Open Knifes are allowed to carry in your Country.. , peaple whit One Hand should get an Expection from German §42a.. -
DAY 7: Sunday is small knife day. Schrade knockoff of the Classic
[attach id=0 msg=2543091]

-
Day 7
Looks like an early fall. Lots of rain here and cooler. How about an outdoor photo? Best wishes. G:D [attach id=0 msg=2543094]

-
I've cut a few with one. They're super cutters!
@AzteCypher said:
<u>Day 6</u>The Imperial Camper Knife didn't do a bad job cutting the cigar in spite of me.

-
I like that Cody!
@cody6268 said:
Day 6: Two mail-calls.The Lledo RNLB Garside (Tyne-class Lifeboat) is tough to find in the States, though a few were brought back as tourist trinkets. I paid $2 shipped for this one off eBay from an eBay seller in CO.
I think Garside was the debut. It was produced for Kimberly-Clark (who if I recall, paid for the boat to be built) on behalf of the Royal National Lifeboat Institution. The box still has a RNLI price tag of GBP 2.50. Over 2-3 years, Lledo did most of the Tyne-class--most of the time, with an ad for the sponsor of the boat on the plinth.
[attach id=0 msg=2543080]
And another package showed up unexpectedly. Long story short, we've had a ton of problems with UPS lately. A neighbor of mine called on his way out from my place, saying he found a package with my name on it--a quarter-mile from my place on an old farm near no address whatsoever. We suspect the owners (my estranged Dad and his second wife I might add) of that property (who without our permission, blocked the driveway on our property with a gate) complained because the UPS guy recently started going through that gate to leave packages on my porch. I've tried to get someone at UPS to get to the bottom of this issue, but so far, nothing's worked.
That package contained some tools I ordered from Caterpillar--drop-shipped through our local dealer. No shipping notification or phone call and I actually checked my CAT account this morning--and it was still saying "processing"--makes me wonder if UPS picked it up on the way out--they're on the same road as the CAT dealer.
Most are rebranded Snap-On, though it appeaers the 213-1983 (6-inch) are actually rebranded Channellock (with exclusive black grips).
[attach id=1 msg=2543080]
-

@matzesu said:
The other 2 Knifes in my Pictures are no Bökers, there are Victorinox ..
will post later today my small Böker and SAK Alike Collection..
I will this week have time to test out how good the Böker SAK really is.. But I find it’s allready quite cool
And thumps up for David Bowen, get well soon, i hope One Hand Open Knifes are allowed to carry in your Country.. , peaple whit One Hand should get an Expection from German §42a.. -
Day 7: KP!

-
If Loop Cutter had the deluxe three layer stainless steel model instead of the single, he would have had some other tools on his Sak-a-like. Here are the excellent scissors on mine. This is the usual state of them after you fold them up. No, they won't cut paper, and the spring has sprung whatever flex it once possessed. The blade is marked Stainless, and it might be. The rest of the implements have rust on them. The stainless steel scales with the black plastic nubs look just fine. I have cut up some apples with it and a few oranges. Best wishes, G
:D [attach id=0 msg=2543113]
-
Still, there's scissors on knives and tools that cost a lot more that should cut but can't.
@IMR4198 said:
If Loop Cutter had the deluxe three layer stainless steel model instead of the single, he would have had some other tools on his Sak-a-like. Here are the excellent scissors on mine. This is the usual state of them after you fold them up. No, they won't cut paper, and the spring has sprung whatever flex it once possessed. The blade is marked Stainless, and it might be. The rest of the implements have rust on them. The stainless steel scales with the black plastic nubs look just fine. I have cut up some apples with it and a few oranges. Best wishes, G
:D [attach id=0 msg=2543113]
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login