SAK-A-Like / Off Brand Challenge - September
-
@nate j said:
Depends on how much bourbon one puts in it…

<u>Day 9</u>
I picked up this NoBox multitool from the Surprise GAW Box sometime last year, I think. It's a good looking multitool but the scissors aren't too great.
It cuts paper ok but once again, you need to be deliberate and help the blades meet towards each other a bit. Similar to the Quirky Switch but not as bad. It did a hair better on double card stock.

The blade had no issues opening a package and the saw did ok but I think it would do better on greener wood.

-
@nate j said:
Depends on how much bourbon one puts in it…
I do have to admit bourbon or whiskey does help Dr Pepper taste real good despite the corn syrup. A little coconut rum is also real good in Jarritos, but they don’t need it because they are great by themselves.
-
@nate j said:
Depends on how much bourbon one puts in it…
It does look nice. I’m convinced scissors are one of the hardest tools to make work well. Maybe that is why many companies don’t even try.
-
Day 8
Since it is a SAK-a-Like challange here's another 'not quite' item...
This is my homemade take on the RipSpool made from a cheap match safe and some random stuff I had hanging around.
DuckTape, heavy thread, 12lb monoline, 75lb nylon bankline and 3 needlesThis little kit is usually in my bag, occasionaly pocket.
.jpg)
-
Day 10
I think my Ruff Rida is falling apart. I took a photo of the outrageously pointy awl in the pocky nife and noticed that the shackle had FALLEN OFF! Completely gone. Pivot pin and all. I hope I don't step on it. I checked all the other fold outs and they look just like they did. I do recall some routine maintenance being done on the shackle. There is an image of a person, or possibly persons unspecified using a mini grinder to do a shackle pin smoothing up. Normal stuff. After some of that, there is an image in my mind of testing the pliers of a Leatherman on the shackle and possibly the pin. Not too sure about the last part. That's all I remember. Well, I shouldn't have expected anything different. All my stuff seems to fall apart. If I happen to find the annoying shackle, I suppose I could cobble it back together. Probably have to use a nail to make another pivot pin. There has been one surprising result of this happy accident. The cute thing is much easier to handle now. Feels nicer in the pocket. I have been using the SAK-a- like to mostly open mail. I did cut some chunks of matted together duct tape off a clothesline. Nothing photo worthy. How about an awl photo? This thing isn't really sharp, but the pointy end is deadly. Nice reach on that tool. Also the 'propeller' shield in the handle. Rider spelled with an 'I' and not a 'Y'. I never owned a 'Y' model. I might have to write a letter to them about their shackle construction problem.Best wishes,
G

[attach id=0 msg=2543296] [attach id=1 msg=2543296]

-
Day 10

-
@Barry Rowland said:
I agree 💯 Gordon. I try to avoid the stuff as much as possible. It takes some doing for sure.I love cane sugar Coke!
Day 9: Used the can opener to get the seal off this peanut butter container.
I rarely drink pop anymore, but I did try a real sugar Pepsi recently. I think it was better
I tried some blood orange lemonade recently that was
GREAT! -
<u>DAY 10</u> Aujourd'hui, mon couteau est français.

[attach id=0 msg=2543304]

-
Most of the time we pick up the store's peanut butter, which needs stirred. Pam gets this to use in her breakfast smoothie, and it was handy!
I seem to recall an ad from Jiff that kids preferred their brand to Skippy :D. I've had Kroger peanut butter. I liked it!@LoopCutter said:
Nice work accessing the sweet goodness of your SKIPPY PEANUTBUTTER.This may seem strange, but my household was fussy about PEANUTBUTTER. Kids preferred JIFF over Skippy.
Kroger had a sale on PEANUTBUTTER, and wife purchased a few cases to donate to the church food bank. I making a funny, you buy JIFF to feed your kids and yet give store brand to other people!
Well a few days later at breakfast, two of the children had peanutbutter toast, both said at the same time, “new PEANUTBUTTER??? It is way better flavor than the other stuff, but again!”
She smiled and stuck in my face, a KROGER PEANUTBUTTER JAR!!!
We then upgraded, and just a few weeks ago when on sale again I tried the Honey version by Kroger brands.
$1/jar good value. -
Day 10: Opening up a tin of tea. It's pumpkin season in the stores!

-
Day 10 of 30
Today Armbar helped me to replace new air filter to my car and also used driver to tighten few hinges on cabinet.
[attach id=0 msg=2543307]

-
@Barry Rowland said:
Most of the time we pick up the store's peanut butter, which needs stirred. Pam gets this to use in her breakfast smoothie, and it was handy!
I seem to recall an ad from Jiff that kids preferred their brand to Skippy :D. I've had Kroger peanut butter. I liked it!I saw a suggested procedure if you use natural peanut and how to avoid having to stir it because of separation.
Place the jar of natural peanut butter in the refrigerator, stored LID SIDE DOWN!
Does not separate or if it does, it is at the bottom when you spoon it out. It from a smoothie person too!
-
Day 10
Two package envelopes arrived late in the afternoon that were fetched from mail box early this morning.
Camillus Crossout DD I’d honors freeing contents.
[attach id=0 msg=2543322]

-
Official it’s day 10 of the Challenge, I think i made 4 accurate posts now, even though I did bought me even an Alternative Multi Functional Knife for the Challenge I find myself lots of evenings in bed whitouth making any pictures.. so might be I will not pass the challenge just because I can’t find the time to work on it..
Even though I will not get the batch then, at least it was a reason for me to buy me this Böker Techtool which is actually a quite nice piece of equipment..
I will definitely post pictures, but might be I’m allready out of competition..(Also I’m allready did use the,Nail Cleaner on my Minichamp, and the Paket Opener Edge on my Swisstool Spirit..
-
Day 10
Opened a bag of candy at work to share. The scissors did the job but not as cleanly as Victorinox scissors.
Funny thing happened though. I had the same small can of tuna that I needed to open - the one that splashes fish juice all over the place because it’s too small to peel open with the pull tab. I thought I was being silly by using a tool to open it so I figured I’d try to act normal and just open it by hand. Mission failed successfully. I got the can open and splashed fish parts all over the place including my eyeball.
Next time I will be more careful.
-
Day 9
The blade on the LM T2 is pedestrian 420HC.
It locks with the same interesting mechanism that locks all the other tools.
OHO is not well done though. The blade has too much resistance to opening, and the thumb hole is too small/not designed correctly. Sometimes I am able to OHO it; other times I resort to 2HO.

-
Day 10
While the edge of the T2’s awl is sharp, the point is inexplicably not. It looks to me like it is flat on purpose.
I just don’t understand the logic.
Decide to make a KBMT with only four tools ->

Decide one of those tools should be an awl ->

Decide the awl shouldn’t have a sharp point ->


-
I'll try it buddy and thanks!!@LoopCutter said:
I saw a suggested procedure if you use natural peanut and how to avoid having to stir it because of separation.Place the jar of natural peanut butter in the refrigerator, stored LID SIDE DOWN!
Does not separate or if it does, it is at the bottom when you spoon it out. It from a smoothie person too!
-
@nate j said:
Day 10While the edge of the T2’s awl is sharp, the point is inexplicably not. It looks to me like it is flat on purpose.
I just don’t understand the logic.
Decide to make a KBMT with only four tools ->

Decide one of those tools should be an awl ->

Decide the awl shouldn’t have a sharp point ->

It's so (like all Leathermans) they can say there's another flathead. It's stupid.
Day 10
The eternal battle against loose drawer knobs.

-
Day 9 (catching up)
Yesterday was a hellaciously busy day for me, and to be fair, these photos were taken the night before. But I got some awl usage in.
[attach id=0 msg=2543365]
Nate and Bob noted that the Leatherman T2's awl needs a rethink. The same is true for the Swiza's awl. It's too short to go completely through a nicotine pouch can (though in their defense, boring holes in such things is not typical awl usage). The awl is difficult to extract from the cut material if it goes in too deeply. And check out the jagged hole it leaves behind! :o
[attach id=1 msg=2543365]
Day 10
Is that a countertop? What the smurf is ol' Farmer X doing? And where is he?

[attach id=2 msg=2543365]
.jpg)
.jpg)

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login