SAK-A-Like / Off Brand Challenge - September
-
Day 11
The large (LM calls it a medium screwdriver, but it is the largest on the T2) flat screwdriver blade of the T2 is quite robust. I’ve only done fairly light prying with it, but I’ve torqued it about as hard as I could without applying a cheater, and it suffered no damage. That’s the good.
Now, the bad. I’ve pointed out what I feel are some poor design decisions in earlier posts, but quite possibly the poorest is sharpening one edge of this implement so it can serve as a “package opener”. Unless one’s design philosophy is “maximize function count at all costs and smurf everything else”, this is a really bad choice for several reasons…
I’ve said it elsewhere on this forum, and I’ll say it again, louder this time for the people in the back. A dedicated package opener on a MT that already has a knife blade is redundant at best.
But the worst part is that, thanks to this ill-advised package opener, one has to be careful not to lacerate one’s fingers when opening and using the screwdriver.
Now, some might be thinking that the iconic TL-29 has a sharpened edge on its screwdriver as well. True, but apples and oranges IMO. For one thing, the wire scraper on the TL-29 serves an actual purpose, while the package opener is a solution in search of a problem. For another, the TL-29 doesn’t have the tool clumping issue that the T2 has.

-
Day 11
“Press here for easy opening”, they said.

-
You need some talons to punch in those openings. I love that stuff. Best wishes. G

-
Swiss+Tech...whatever they call it. If the LM T2 is a SAK-alike, this is a SAL-alike clone, but maybe with a better tool selection. :-\ The down side is that they are "come one, come all" when you try to choose one.
[attach id=0 msg=2543388]
Swisstech 13 in 1 multi tool. Is it decent enough? How do the rest of the tools measure up?
@BPRoberts said:
Alas, the might JOTS could not fix whatever was wrong with my wife's car. It'll have to get towed to the shop tomorrow.Hope it's a quick and not terribly expensive fix.
@Farmer X said:
Just a glamour shot with a Lego monster truck, as the tablet wants to be charged (again).That's a neat little monster truck.
@ElevenBlade said:
“Press here for easy opening”, they said.I'm a sucker for cream of wheat though I end up tearing the box apart like a neanderthal because it's just easier.

-
<u>Day 11</u>
The Mikov assisted with my my spam and fried egg breakfast burgers.

The corkscrew seems to hold it's own. I didn't drive it down too deep, as I didn't want to bend it, but it did pretty good.

-
Day 12

-
@AzteCypher said:
The Mikov assisted with my my spam and fried egg breakfast burgers.Both (burgers and the knife) look good! :D
-
Day 11
Made some lables...
Imperial scored them fine....
Then discovered the old sheet I found wouldn't stick to anything.


-
DAY 12 Berlin Brigade Adler showing off.
[attach id=0 msg=2543495]
[attach id=1 msg=2543495]

-
Day 12
Might be time to switch horses. Off-brand Camillus electrician's tool. This one is stamped Craftsman for sale by Sears. Nothing but a TL-29 with simulated wood-grain Delrin handles. I think Camillus labelled it as a Model 27. It was also sold as a Dura Brand. Large blade. Screwdriver/wire stripper that locks open. Half stops on both blades. This was the cheapest knife listed in the 1981 Craftsman catalog. The wood handled military models probably have a better feel that the rather greasy Delrin. Very practical medium weight carry utility knife. Stainless steel. I put a lanyard thingie on it. I never have been a dangler person, but I will give it a shot. The shackle has enough stiffness to fold down out of the way and not flip around so much. I must have had one of these knives before. I certainly saw plenty of them. How about some catalog photos? Best wishes. G[attach id=0 msg=2543496] [attach id=1 msg=2543496] [attach id=2 msg=2543496]



-
My father in law was an electrician. I have a couple of those lying around. They're well built!
Day 12: Just hanging out!

-
Day 12 of 30
Today needed to carry P4 along with T4 while repairing more of my car, opened hose clamp with T4 combotool once again (hopefully last time for while)
[attach id=0 msg=2543519]

-
Day 12
Just taking a walk

-
Day 12
Up at 5AM, ready to start my day! Oh a couple more minutes, nobody be the wiser! That was 5 hours that quickly slipped by, rolled over and clock reads 10:0…
We’ll be plans can go awye when retired

My selected carry this FRIDAY INCLUDES THESE TWO.
[attach id=0 msg=2543546]BO PST and a GI Jack (luv that blade!)

-
I like that combo!
-
Day 12
Finally, some can opener action.
[attach id=0 msg=2543572]
It got the job done. The word I'd use is "arduous." I'm not sure if it's not sharp enough, the hardness is a little off, or it's just a bad design. I had to exert too much force with every cut. Pushing away from myself was even worse than pulling towards myself. Perhaps I'll try it again sometime, but it now stands as one of the worst multi can openers I've tried. And yes, I eat counterfeit Spaghetti-Os for breakfast.
[attach id=1 msg=2543572]
And now for something different...
[attach id=2 msg=2543572]
That is a Schrade 707UH. It measures 2.875" closed, and features a clip point blade, scissors, and an itty-bitty bail. If memory serves my correctly, it wasn't in the line very long, so I'm guessing it wasn't a brisk seller. I also believe it was the only Uncle Henry model with scissors. This one was made in USA; I don't know if it was resurrected after Schrade went bust.
.jpg)
.jpg)
.jpg)
-
Finally, some can opener action.
[attach id=0 msg=2543572]
It got the job done. The word I'd use is "arduous." I'm not sure if it's not sharp enough, the hardness is a little off, or it's just a bad design. I had to exert too much force with every cut. Pushing away from myself was even worse than pulling towards myself. Perhaps I'll try it again sometime, but it now stands as one of the worst multi can openers I've tried. And yes, I eat counterfeit Spaghetti-Os for breakfast.
Actually the store brand products have better flavor than the originals.
Yes, I have same issue with pull can openers. Not even worth trying as cans are likely made with better steel than imitation tools.
-
on both counts. I was curious about how that opener would work. I know Explorer and Adventurer Mike Horn uses a Swiza knife, but I doubt he's opening many cans anymore. Everything is vacuum packed.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
