SAK-A-Like / Off Brand Challenge - September
-
Day 16
[attach id=0 msg=2543896]
Neither have tweezer or toothpick scale tools😱. 14 more days

Maybe that is the real reason Victorinox is yet popular with the world?
Oh, oh, I just recalled I have another gadget knife that may qualify. Needs cleaning, a lot of cleaning, and definitely oiling. A monster type of tool. Where is it ? Come out come out where are…

-
Day 16
.jpg)
-
@AzteCypher said:
<u>Day 15</u>I have elected to play around with the Leatherman Free T2, T4 and Gerber Armbar drive.
I 3D printed some thumb studs to help with the OHO, and I think it helps but it also depends on how tight your multi tool is. I also decide to 3D print a new middle section for the Free T2 to be able to add additional tools. The first one I found had openings that were too large so the tools would slip out. I found a remix of the first one which made the tools fit tighter, but I found that it made them fit too tight. I ended up modifying the first one I found to make the tools slide in almost right. This one makes provisions for a Vic toothpick, tweezers, pen, and a Tortoise Gear Firefly.


If anyone would like a 3D printed stud or a T2 middle section. Just message me your address, your preferred color, and I'll send it your way. I'm curious to see if y'all find it beneficial or not.
Cheers!

That's a cool project. I wish more companies would work on scale tools. It's free real estate, and in ~100 years I don't think they've come up with more than 10 things to cram in there. Surely somebody can get me some cool new idea.
Day 16
The box is back on the move!
[attach id=0 msg=2543926]
-
Day 15
The M390 blade came sharp out of the box, and is worth the price of admission all by itself.

-
Day 16
The fork seems very small and also quite short to use as I would a normal fork. Perhaps it is supposed to be more of seafood fork or fruit fork?

-
Day 16
No uses today.
Noodling on the guitar before turning in for the night

-
Day 16
Scissors were needed for today's task, so out came the Armbar Scout.
[attach id=0 msg=2543945]
The scissors did quite well on the old T-shirt. But the job was a bit of an ordeal. Why? I'm not a fan of pocket clips in general, and this one in particular caused my hatred of them to violently reflash. It creates a horrendous hot spot, and the tip dug deeply into my palm. The offending object may be removable. If so, it will be gifted a one-way trip to the landfill.
[attach id=1 msg=2543945]
.jpg)
.jpg)
-
Day 14:
Not much use...
[attach id=0 msg=2543946]

-
Day 15:
Kershaw Good Buddy--I'm thinking '70s vintage? These were fairly early, and made well into the '90s. Japan-made. I also have a different model I got alongside it--money clip with blade and scissors. Was my money clip for years--as I thought I lost my Ambassador Money Clip--turns out, it was wedged for 5+ years under a dresser drawer! I hadn't gotten rid of the T-Shirts that I never wore in that drawer, and had I not pulled it out, I never would've noticed.
Blade and nail file, screwdriver, and bottle opener combo tool.
[attach id=0 msg=2543947]

-
Day 16:
Finally, some use.
I went back to the Crater C33T. I like it. Fairly light, clip, and slim. Also, JUST the tools I need--nothing else (except scissors--no problem, I've got 20 Classic SDs...).
I'm still considering trading my Free T2 for an older traditional folder tomorrow while by an antique store near my house. I've gotten rid of loads of knives that were halfway decent, but I just didn't like them--mostly for other knives I did like (plus an old Japanese folding saw that cuts like a laser!). I bought the thing when Lowe's had them briefly '21-ish, and never liked it. Maybe carried ten times or less. It's as heavy as a Fieldmaster, with maybe as many tools as a Tinker or Spartan. On top of the $50 they are now (I think I paid $40 at Lowe's), you have to pay $10 for the clip. Bits--not a chance. Crater--if you've got a Gerber, Leatherman, or even Chinese off-brand tool adapter that fits over the Phillips--they'll work on the C33T as well. Some Crater models came with a bit driver--too rich for my blood (Leatherman is stupid to not have the bit driver on the Free T or K line--but can I mod a bit driver in the T2?).
Installed some screws to a new door handle .I had several that just didn't work, and finally, I routed out the hole in my door. As it turns out, the hole was bored specifically for the '06-era lockset I originally had. It became damaged, and I went through 5 different ones trying to find something that fit. This is the cheap $7 one from Lowe's--and, actually an exterior one....
Note; lost the right screws, but I still had the old ones. Besides, they don't fit in the holes--the holes somehow got badly damaged/reamed--thus, I'll have to put some dowels or something down the hole. I know they make wood screw hole repair inserts--but I haven't' seen them locally. Plus, they're priced obscenely for plastic...
On another note, I'm hoping the guy may have a Leatherman for once--like yet another PST--or better yet, a Micra.
[attach id=0 msg=2543950]

-
Day 17

-
@nate j said:
The fork seems very small and also quite short to use as I would a normal fork. Perhaps it is supposed to be more of seafood fork or fruit fork?I used the one on my Mikov to pull out jalapeños one evening. Forgot to take a picture of it though.
@cody6268 said:
Kershaw Good Buddy--I'm thinking '70s vintage? These were fairly early, and made well into the '90s. Japan-made. I also have a different model I got alongside it--money clip with blade and scissors. Was my money clip for years--as I thought I lost my Ambassador Money Clip--turns out, it was wedged for 5+ years under a dresser drawer! I hadn't gotten rid of the T-Shirts that I never wore in that drawer, and had I not pulled it out, I never would've noticed.Blade and nail file, screwdriver, and bottle opener combo tool.
I'm not familiar with those. That's pretty neat. Might have to find me one for my SAK-A-Like collection.... don't judge me.

-
<u>Day 16</u>
Just some light package duty for the T2 today.

-
Day 16
The Ruike cut the tamper seal so I could opened a new bottle of whiskey. Some Japanese whiskey to drink while watching this month’s sumo tournament.
-
Day 17
Good to see another sumo fan here. I usually watch on NHK World. Might have to make some red beans and rice today. I have some sweet pepper that I need to use up along with some hamburger.Best wishes. G
:D [attach id=0 msg=2543966]
-
DAY 17 An Adler that has no Vic counterpart that I'm aware of. Five layers, with pliers, saw, and file.
[attach id=0 msg=2543973]

-
Day 17: Vanity pic today :ahhh ☕☕

-
Day 17
Posing with a couple of my oldies, the Ozark added color to a couple 2nd gen WAVES, I was inspecting.
The SS took a stab at being a work carry, but always fell short against my ST3 and /or the REBAR.
The Cabela’s Orange is a favorite just for the color but finish is delicate.
[attach id=0 msg=2543977]

-
Y'awl have to fill us in on watching sumo now. It's awlways seemed interesting, but I don't really know much about it.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
