Monday Bonday !
-
@Crunchie64 said:
How can you tell it’s a second generation model?I thought the only difference was the shape of the blade tip.
I’m surviving with my first gen, and hoping there’s a Bond II with combo blade and scissors on the way.
From Gary’s picture of the tool laying out.
On the handle, one side has two holes tapped for the pocket clip.
On the opposite side, the handle holding the blade has a square hole near the end. That indicates a first gen model. It is a standoff to keep the blade edge from bottoming out when closed.
[attach id=0 msg=2542071] square
[attach id=1 msg=2542071] two


-
Stay here long enough and I learn a few things. Square hole means Gen 1. It does have the two tapped holes for a pocket clip. Didn't come with a clip, which saved me the trouble of taking it off.
It came dry as a bone, which could indicate a severe lubricating oil shortage in Oregon. Nice and stiff too, which was expected. I dribbled a few drips of synthetic lube on it and worked it a little. Not so reluctant to open now. I am having fun piddling with it.
I would have liked to run a weedwacker a little today. I picked up a few branches that were scattered across the lawn. That took so much zip out of me I figured running my Stihl would likely end in a fatality. Or worse, IMR lying on the lawn somewhere still alive waiting for the coyotes to come and dine at night. Brrrrr. I did drive my Cub some and mowed a half an acre or a little more. No real effort required for that.
Best wishes. G

-
From having said your COVID TEST was negative, and how ill you reported, two days not leaving the house.
And, then today NYtimes report COVID CASES ON THE RISE, I wager you had Covid my friend.
DoNOT OVER DO IT.
My BONDs and REBARs always arrived dry and tight.
I have 3 within reach right now, the 2 gen2s are like new and needed dabs if KPL
The 3rd a gen1, the blade is loose, so much side to side play, inside the handle and out, I believe it will make warranty trip to Oregon in the near future.
On the auction site, have been lucky getting these for about half off, not including shipping. Great gifts, or an extra tool for different corners on the homestead indoors😉
-
@Crunchie64 said:
How can you tell it’s a second generation model?I thought the only difference was the shape of the blade tip.
I’m surviving with my first gen, and hoping there’s a Bond II with combo blade and scissors on the way.
Oh! Buy the way dear Cruunchie64, today is Monday BOND ay in your part of the world too!
Could you please add a photo of your gen1 original BOND.
😎And, your welcome to join us next week same place, same day. If you arrive before me, draw yourself a pint as well
or two!😜 -
A new to me BOND arrived today.
This one will be assigned to a pocket slip to start, to easily extract it from the sleeve, I deployed the lanyard loop, (next to the file) and added a colorful zipper pull.
[attach id=0 msg=2542079]
[attach id=1 msg=2542079]


-
Bond Monday on my way visiting otolaryngologist..

-
Very nice!

-
Happy Bonday. Wait, is today Labor Day? Ah, shucks, now I have to go outside and labor. Best wishes. G
[attach id=0 msg=2542593]
-
To Labor DayMonday BOND ay too!

-
Nice shots on bond day everyone

-
Lots of great pics in here


-
HAPPY HAPPY MONDAY🥳
It Monday BOND ay!!!
A gen2 taking in the view,
[attach id=0 msg=2543183]

-
I'm finally getting the tools loosened up a little on my Bond. I am about ready to take the duct tape off the knife blade. Tried to post this picture by phone and couldn't. Best wishes. G
:D [attach id=0 msg=2543192]
-
Another office bond day

-
Bonds, bonds. Finally took the tape off the blade. Best wishes, G [attach id=0 msg=2543768]

-
Monday BONDay
[attach id=0 msg=2543772]
Posing with September’s barn photo,
[attach id=1 msg=2543772]
Tucked back into slips for assigned duties…
BOND is a good size for easy carry, yet serious duty if required. And, at a reasonable purchase price, more so on the auction site…


-
Very cool pics again :o

-
Monday BONDay!!!
Opening a blister package this morning to release a knife with cellidor scales for a CHALLENGE in the month of OCTOBER, showcasing the SPARTAN if curious…

[attach id=0 msg=2544481]

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login