Looking for edc multitool recommendations.
-
Hello. I have been carrying a gerber suspension NXT and realized I really never use the pliers and want something with less bulk and weight. My main things are Scissors, small Phillips(0-1 range for kids toys), and a blade. Flat heads and prying would be nice but not required. I have considered a Victorinox SAK but am afraid to spend money and the scissors not be strong enough for my needs. I mostly cut tags and small plastic, but sometimes my son’s toys come with a heavier duty zip tie that is too tight to get a knife blade under. Thanks
-
Welcome aboard!
I’m going to suggest a possibly multi-step/two-tool solution.
First, get a Victorinox Rambler. The small Phillips is perfect for all those battery compartments on kids’ toys. The Vic scissors (even the small ones) are the best in the MT world. The small blade is more capable than it looks. The screwdriver tip of the nail file can handle some flathead screws and light prying.
If you find the Rambler doesn’t cover all your bases in actual use, then add a Pioneer or Pioneer X (if you want the larger scissors). You’ll get the longer, stronger knife blade. The stout cap lifter/screwdriver can handle larger flatheads and more moderate prying. The 93mm awl is absolute murder on zip ties.
The Rambler + Pioneer is going to be about half the weight of your Gerber Suspension NXT.
The Rambler + Pioneer X would be about 2/3 of the weight of your Gerber Suspension NXT.
Let us know how you make out!
-
I too have kids who like toys, so I know exactly where you’re coming from. I carry a Phillips 0 in the smallest form I can devise:

That’s just a 1/4” to 4mm bit adapter with a Wiha bit in it, wrapped in electrical tape for grip. Also carry a full size SAK at all times, between the scissors and the sharp edge of the can opener you can cut those plastic ties, though like Nate says, the 93mm awl is tops for that.
If you want to have a one-piece solution you might look at the Roxon Flex Mini Companion, a modular pocket knife. On the back it has a 4mm bit driver and on the front your choice of 4 short tools from their range that can be swapped in and out. Those include scissors, a plain blade, an awl with a sharp edge and a small serrated blade that looks perfect for cutting plastic ties. I don’t have one of these yet but aim to get one.
-
Two things come to mind:
1- Victorinox scissors are the standard that every company strives to meet, and few (if any) have managed to achieve the same level.
2- Victornox scissors probably won't go through zip ties. They will do the teeny white ones on some toys, but the black ones that are about 1/8" thick are a real challenge for them.
In my mind, when one wants a small phillips, tough scissors and a blade there really is only one choice, and it is perhaps the most perfect multitool ever made.
You need to get a Leatherman Micra.
Don't let the small size fool you- the blade is a razor, the scissors will cut just about anything that gets in their way and the crappy 2D phillips is a lot more effective than anyone gives it credit for.
If you pair the Micra with a decent SAK I don't believe any problem in the world will slow you down.
Def
-
@Grant Lamontagne said:
Two things come to mind:1- Victorinox scissors are the standard that every company strives to meet, and few (if any) have managed to achieve the same level.
2- Victornox scissors probably won't go through zip ties. They will do the teeny white ones on some toys, but the black ones that are about 1/8" thick are a real challenge for them.
In my mind, when one wants a small phillips, tough scissors and a blade there really is only one choice, and it is perhaps the most perfect multitool ever made.
You need to get a Leatherman Micra.
Don't let the small size fool you- the blade is a razor, the scissors will cut just about anything that gets in their way and the crappy 2D phillips is a lot more effective than anyone gives it credit for.
If you pair the Micra with a decent SAK I don't believe any problem in the world will slow you down.
Def
I have had a Micra as my daily carry a few times in the past. Always ended up going back to my SAKs, partly because the Micra scissors, while very capable, are not quite as good as SAK scissors for some things. And partly because I missed the opener layer, which as well as opening and screwdriving I find invaluable for many small prying and scraping jobs. There is also the faff of having to open up the Micra to access the tools.
The flat Phillips on the Micra is indeed not bad, I found the main problem with it was I would forget it was there and not use it when I could have. The only downside I can see with it for current purposes is that sometimes those battery compartment screws are recessed in quite small holes and it might not fit. But would be just fine 95% of the time.
-
I agree about the scissors- the Micra's scissors are a lot of horsepower in a small package, but not very finessed. The scissors on a SAK are more precise and sophisticated, and the Micra is about as subtle as a brick.
There's enough space in the world for both! :D
Def
-
@Grant Lamontagne said:
I agree about the scissors- the Micra's scissors are a lot of horsepower in a small package, but not very finessed. The scissors on a SAK are more precise and sophisticated, and the Micra is about as subtle as a brick.There's enough space in the world for both! :D
Def
Yeah I do like it, I think it’s a classic design.
One thing I like on it that I don’t know if a lot of people use in the same way, is the long eyeglass screwdriver which is really good for opening up small split rings, the kind that you get on a SAK that can destroy your thumbnails. Which is why my Micra usually resides in my SAK kitbag where I keep all the stuff I use for messing around with them.
-
@fullbreakfast said:
One thing I like on it that I don’t know if a lot of people use in the same way, is the long eyeglass screwdriver which is really good for opening up small split rings, the kind that you get on a SAK that can destroy your thumbnails.I use the Vic can opener for split rings.

-
I don't think there's a "one and done" solution for those needs. Were I paddling that boat, I'd buy both a Micra and a Rambler. If you run across anything their scissors can't handle, you probably need full-size scissors or aviation snips! A Victorinox Tinker, Spartan, or Pioneer could be added for its bigger blade and opener/flathead layer. For prying, I prefer a one-piece tool such as Gerber's Shard and Mullet. And don't discount utility knives. I've slid their thin, replaceable blades underneath many a persnickety zip tie.
It is worth noting that brand-new Micras have gotten pricey, but last I checked, there were many good used examples on eBay for about $20. Used SAKs (especially Spartans and Tinkers) can also be found for a pittance.
Good luck, and let us know what you wind up with!

-
@Grant Lamontagne said:
Two things come to mind:1- Victorinox scissors are the standard that every company strives to meet, and few (if any) have managed to achieve the same level.
2- Victornox scissors probably won't go through zip ties. They will do the teeny white ones on some toys, but the black ones that are about 1/8" thick are a real challenge for them.
In my mind, when one wants a small phillips, tough scissors and a blade there really is only one choice, and it is perhaps the most perfect multitool ever made.
You need to get a Leatherman Micra.
Don't let the small size fool you- the blade is a razor, the scissors will cut just about anything that gets in their way and the crappy 2D phillips is a lot more effective than anyone gives it credit for.
If you pair the Micra with a decent SAK I don't believe any problem in the world will slow you down.
Def
^^^ This.
I have a Micra and love it
Having said that, the scissors blades on the PST2 are about the same size although its thumb actuated handle is less good than the Micra. They carried a similar scissors over to the Surge, but that thing is a boat anchor, and I see you've said you are not interested in heavy, plyers based tools.
A Micra paired with a Vic Tinker Deluxe does get you a smaller plyers.
Or paired with a Vic Hiker will get you a small saw.
-
I suppose I should add that I don’t use scissors to cut zip ties. My choices for zip tie removal, in order of preference:
-
Diagonal cutting pliers - Really the best tool for the job, but not something I’m going to EDC.
-
Vic 93mm awl - Like I said earlier in this thread, very effective. With extremely tight zip ties, often all one has to do is get the tip underneath, and then simply push the knife towards the awl until the zip tie pops off.
-
Knife blade - Perfectly functional, as long as your blade has a good usable point. Case Marilla may be the best blade I have for this task, but lots of others will work.
-
-
You haven't cut a zip tie until you have cut a zip tie with the Gerber Cable Dawg.
But at $300, if you can find one, and all of the telecommunications stuff that isn't usually included in most kid's toys, it might be a bit overkill.
But there isn't a zip tie on the planet that does a better job than the Cable Dawg!
Def
-
For me the Cadet handles most of what you are asking for as I used to run across the same things especially Christmas for my son. Even with the hard to reach zip ties I've been able to pop it with the blade tip. The tip of the file can be used on the smaller screws. I've been able to do without scissors but you could pair the Cadet with a Swiss Card or just the scissors itself.
But as mentioned before the Micra will cover most of the bases. But I really like the Cadet as I personally need a larger blade and I've pried and beat on it and it keeps going.
-
@fullbreakfast said:
I too have kids who like toys, so I know exactly where you’re coming from. I carry a Phillips 0 in the smallest form I can devise:
That’s just a 1/4” to 4mm bit adapter with a Wiha bit in it, wrapped in electrical tape for grip. Also carry a full size SAK at all times, between the scissors and the sharp edge of the can opener you can cut those plastic ties, though like Nate says, the 93mm awl is tops for that.
If you want to have a one-piece solution you might look at the Roxon Flex Mini Companion, a modular pocket knife. On the back it has a 4mm bit driver and on the front your choice of 4 short tools from their range that can be swapped in and out. Those include scissors, a plain blade, an awl with a sharp edge and a small serrated blade that looks perfect for cutting plastic ties. I don’t have one of these yet but aim to get one.
That's a cool idea. How about making the "handle" T-shaped, or like a wingnut, for more purchase and leverage.
The orange peeler in MiniChamp also cuts through plastic, and the pulling motion is safe to use. Not sure about thicker zipties though.
-
My very first thought was the old Wenger Ranger 130 that has folding shears
I think it’s the Ranger 174?? I also think it has Philips on the backside too
If you check sakwiki you’ll know for sure. I don’t know if Victorinox released the same version too?? -
@tosh said:
My very first thought was the old Wenger Ranger 130 that has folding shears
I think it’s the Ranger 174?? I also think it has Philips on the backside too
If you check sakwiki you’ll know for sure. I don’t know if Victorinox released the same version too??Victorinox made model with folding scissors (RangerGrip 71 Gardener) but it has corkscrew instead phillips but on orginal Wenger has phillips on backside (Ranger 172 - Gardener)
here is my Vic Delemont RangerGrip 71 Gardener
[attach id=0 msg=2545906]

-
@fullbreakfast said:
The flat Phillips on the Micra is indeed not bad, I found the main problem with it was I would forget it was there and not use it when I could have. The only downside I can see with it for current purposes is that sometimes those battery compartment screws are recessed in quite small holes and it might not fit. But would be just fine 95% of the time.This is where I eat crow. Because I had to charge the batteries in a stupid Brio locomotive where the screw is down the chimney hole, which is both narrow and surprisingly deep.
Troika mini tool pen from my EDC pouch? No, too short:

Inline Phillips on my Explorer almost reached, but got too thick too soon to get right down there:

Hoto precision driver? No chance:

Cybertool bit holder is too big:

So is the Wiha 4mm adpater:

Micra for the win!

I've also got a set of proper precision screwdrivers with long thin blades, of course. But I view using those as strictly cheating.
-
@fullbreakfast said:
This is where I eat crow. Because I had to charge the batteries in a stupid Brio locomotive where the screw is down the chimney hole, which is both narrow and surprisingly deep.Troika mini tool pen from my EDC pouch? No, too short:

Inline Phillips on my Explorer almost reached, but got too thick too soon to get right down there:

Hoto precision driver? No chance:

Cybertool bit holder is too big:

So is the Wiha 4mm adpater:

Micra for the win!

I've also got a set of proper precision screwdrivers with long thin blades, of course. But I view using those as strictly cheating.
Curious if the Vic 58mm combo tool would have gotten this done?
-
@fullbreakfast said:
I've also got a set of proper precision screwdrivers with long thin blades, of course. But I view using those as strictly cheating.On no other forum in the world would using the right tool for the right job be considered cheating! :D
Good for you, getting the job done in the least convenient (but coolest) manner possible!

Def
-
@nate j said:
Curious if the Vic 58mm combo tool would have gotten this done?Good question, I didn’t think of that at the time. Even though my Vagabond was sitting in my work bag right by me. But I’ve checked, and yes it does the job quite nicely.
It just goes to show, a SAK can always do the job, just not necessarily the one you have in your hand.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login