SAK-A-Like / Off Brand Challenge - September
-
@Antti Lammi said:
Just wondered could i use my K502X on this challenge or is it bit too much stretch? It has canopener and bitdrive but its still kinda SAK-A-Like so i decided to ask opinion of itIt's a knife-based tool, has at least one implement that isn't a knife blade, and it's not a SAK, I'd say that qualifies.

-
@AzteCypher said:
It's a knife-based tool, has at least one implement that isn't a knife blade, and it's not a SAK, I'd say that qualifies.
Then im gonna carry it tomorrow
-
Day 25 of 30
Today nailcare with Aitor nailfile and scissors. Tho im not sure is that nailfile but it works
[attach id=0 msg=2544881]
-
Day 25
Tonight trash and recycle bins go to the street.
Several card board boxes needed to be cut down, and the only knife in my pocket is my grey Ozark.
And just like a SAK it was sharp right up to the point it was not. Tried a stropping, but no, the edge was requiring more grit. Ten boxes, is the limit, and task was completed by my garage utility blade.
Picture is after, and the. Made edge returned to hair shaving (arm hair😉) sharp.
[attach id=0 msg=2544885]
This the most SAK-a-like knife steel I have, both this Grey and the RED OZARKs performed identical with exception of the scissors.
The Camillus crossout and Case Scout Jr both have better steel. For the models that I enjoyed carrying so far.
I have resisted buying additional models 😯. But did catch myself looking yesterday at a Sportsman’s Warehouse. No Gerbers Armbar on the pegboard. So close..,

-
@MadPlumbarian said:
But there gummy’s not beef bites? So watermelon gummy’s with a coating of chili?
JRYes. I don’t know if you’ve ever had Sour Patch Kids, but it is like the took a bag of watermelon Sour Patch Kids and covered it in chili powder in place of the sour coating.
@BPRoberts said:
Aitor is probably my favorite "B tier" brand. Great multis.I’ve only been able to try this one, because they are hard to find, but it is a well built tool.
-
I looked at lots of knives at the flea markets. If there were only one or two on a table, I would likely price them. If it was a dealer with a showcase or roll of knives, I might pick out something to look at and maybe not. One dealer/friend had his roll and I saw a SAK sized red camp knife with a shield and X. I asked him what it was and held out a hand. He said, "Oh, that's a Spanish thing." He said it in such a way that he figured the sorry thing was beneath my notice. So, I passed on. I would have like to handle it. Might have bought it. I actually saw several at one time or other, but never bothered to look at them.
Moral of the story. If you are a dealer and someone wants to see something you have, show it to them. A sale is a sale.
Best wishes. G

-
Day 25
Lunch time

-
Day24 late
Pop tops make the can opener sad.
But this can opener isn't sharpened or even ground, just stamped with no edge.... so it was probably sad already..jpg)
-
My Dad showed me how to open cans with a jack knife. I didn't think of it as dangerous, but of course it was. I was opening a can with my knife and my Dad saw what I was doing. He took me to task for ruining my knife. So, I stopped doing it. I looked at my knife, and sure enough the can lid had put some nice nicks in the blade.
I'm sure Dad must have been using his knife to open cans. Outdoor use, of course. Fishing or whatever. He picked up a P-38 folding can opener and carried it for years. Lots of the old can openers on knives required lots of effort to use or just failed.
I wouldn't think of using a knife blade as a can opener now. Best wishes. G
;) -
Ironically it was the can opener that originaly drew me to this Imperial. When I found it at the pawn shop it was just another sak-a-like camper, but as soon as I saw the curve of the can opener I remembered my 1st Imperial as a kid.
-
Day 25
Whats a multitool without a bottle opener? I had to try it out at least once. It did the job with a couple of pulls

-
Day 25
Speaking of can openers, here's FRED, the
smurfing Ridiculous Eating DeviceField Ration Eating Device. Mine is made in China, but they were designed for the Australian military. Just enough spoon to eat with, small/flat enough to fit in a wallet, and a solid bottle/can opener. I suppose the back end could probably make it as a light scraper/pryer/flathead if it had to. I've dabbled with trying to put a (very slight) edge on one side. Not enough to be a "knife" just enough to help it open a box or badly cut a donut or something in portions. It's a nice compliment when I'm carrying a basic folder, and I probably use the emergency spoon 2 or 3 times a year. Kind of reminds me of (but tastes better than) the wooden ice cream spoons one of you mentioned a few days back.
-
@BPRoberts said:
Have a Pumpkin cameo.
@Sos24 said:
I was a little disappointed (both clip and saw) in the Scout as wellI've tested the saw on my Armbar Scout previously. It's not as good as those on a Victorinox or a Leatherman, but I found it okay.
@LoopCutter said:
The other two have no idea what to call them.One looks like a single-cut file with a slotted screwdriver tip.
@nate j said:
Lunch time
Even better with Jarritos!Day 25
I tightened up the knobs on the closet doors today. Bi-fold doors mean odd angles and little light, so this was a tricky action shot.
[attach id=0 msg=2544942]
Two knobs were within the desired range, and one had a stripped screw. The Curve's 2D Phillips did a surprisingly good job on the other five.
[attach id=1 msg=2544942]
![SAK-Alike_Challenge_2025_Day_25_(1)[1].jpg](/assets/uploads/_imported_attachments/migrated/590850_SAK-Alike_Challenge_2025_Day_25_(1)%5B1%5D.jpg)
![SAK-Alike_Challenge_2025_Day_25_(2)[1].jpg](/assets/uploads/_imported_attachments/migrated/590851_SAK-Alike_Challenge_2025_Day_25_(2)%5B1%5D.jpg)
-
<u>Day 25</u>
Had to sharpen a pencil to add to the ever growing grocery list. These kids are going to eat me out of house and home.


-
@BPRoberts said:
Day 25Speaking of can openers, here's FRED, the
smurfing Ridiculous Eating DeviceField Ration Eating Device. Mine is made in China, but they were designed for the Australian military. Just enough spoon to eat with, small/flat enough to fit in a wallet, and a solid bottle/can opener. I suppose the back end could probably make it as a light scraper/pryer/flathead if it had to. I've dabbled with trying to put a (very slight) edge on one side. Not enough to be a "knife" just enough to help it open a box or badly cut a donut or something in portions. It's a nice compliment when I'm carrying a basic folder, and I probably use the emergency spoon 2 or 3 times a year. Kind of reminds me of (but tastes better than) the wooden ice cream spoons one of you mentioned a few days back.



-
Day 26

-
Day 25
Used my first knife to open popsicle

-
Day25
Some minor repairs; that leg in the upper left split and had to be glued, then reattached. Used the Imperial's awl to scrape old glue, both from the piece and from the bottle cap.The ratchet driver is my trusty old auger brace with a 1/4 hex quick change chucked in it, I love this thing as a bit driver.
.jpg)
-
Day 26
Rained yesterday. Made it a good day for black-eyed peas. I don't know what all the spiders do all year, but they sure get active in the fall. Sak-a-like with a spider. Best wishes. G:) [attach id=0 msg=2544960]

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login